* [DistroKit] [PATCH] v7a: tf-a: update to v2.5 for LXA MC-1 support
@ 2021-07-06 4:57 Ahmad Fatoum
2021-07-06 5:37 ` Robert Schwebel
0 siblings, 1 reply; 2+ messages in thread
From: Ahmad Fatoum @ 2021-07-06 4:57 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
The v2.5 release of the ARM trusted firmware now contains support
for the Linux Automation MC-1, allowing us to drop our board support
patches. Use it.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
...d-support-for-Linux-Automation-MC-1-.patch | 419 ------------------
...tm32mp1-enable-hash1-unconditionally.patch | 63 ---
configs/platform-v7a/patches/tf-a-v2.4/series | 12 -
configs/platform-v7a/platformconfig | 4 +-
4 files changed, 2 insertions(+), 496 deletions(-)
delete mode 100644 configs/platform-v7a/patches/tf-a-v2.4/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch
delete mode 100644 configs/platform-v7a/patches/tf-a-v2.4/0101-fdts-stm32mp1-enable-hash1-unconditionally.patch
delete mode 100644 configs/platform-v7a/patches/tf-a-v2.4/series
diff --git a/configs/platform-v7a/patches/tf-a-v2.4/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch b/configs/platform-v7a/patches/tf-a-v2.4/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch
deleted file mode 100644
index cc8dd072e28d..000000000000
--- a/configs/platform-v7a/patches/tf-a-v2.4/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch
+++ /dev/null
@@ -1,419 +0,0 @@
-From: Ahmad Fatoum <a.fatoum@pengutronix.de>
-Date: Wed, 29 Jan 2020 16:04:18 +0100
-Subject: [PATCH] fdts: stm32mp1: add support for Linux Automation MC-1 board
-
-The Linux Automation MC-1 is a SBC built around the Octavo Systems
-OSD32MP15x SiP. The SiP features up to 1 GB DDR3 RAM, EEPROM and
-PMIC. The board has eMMC and a SD slot for storage.
-
-The SDRAM calibration values are taken as is from the DKx boards, which
-seem to be suitable for operation at German room temperature.
-
-This is deemed ok for now, but for use in the field, the SiP will likely
-need to have its timings determined in a climate chamber.
-
-Change-Id: I5f43a61930151ae9d1df2ea7d0f6f9697c813ce0
-Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
----
- fdts/stm32mp157c-lxa-mc1.dts | 106 +++++++++++++++++
- fdts/stm32mp15xx-osd32.dtsi | 278 +++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 384 insertions(+)
- create mode 100644 fdts/stm32mp157c-lxa-mc1.dts
- create mode 100644 fdts/stm32mp15xx-osd32.dtsi
-
-diff --git a/fdts/stm32mp157c-lxa-mc1.dts b/fdts/stm32mp157c-lxa-mc1.dts
-new file mode 100644
-index 000000000000..47b96852496f
---- /dev/null
-+++ b/fdts/stm32mp157c-lxa-mc1.dts
-@@ -0,0 +1,106 @@
-+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-+/*
-+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
-+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
-+ */
-+
-+/dts-v1/;
-+
-+#include "stm32mp157.dtsi"
-+#include "stm32mp15xc.dtsi"
-+#include "stm32mp15xx-osd32.dtsi"
-+#include "stm32mp15xxac-pinctrl.dtsi"
-+
-+/ {
-+ model = "Linux Automation MC-1 board";
-+ compatible = "lxa,stm32mp157c-mc1", "oct,stm32mp15xx-osd32", "st,stm32mp157";
-+
-+ aliases {
-+ mmc0 = &sdmmc1;
-+ mmc1 = &sdmmc2;
-+ serial0 = &uart4;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart4;
-+ };
-+
-+ led-act {
-+ compatible = "gpio-leds";
-+
-+ led-green {
-+ label = "mc1:green:act";
-+ gpios = <&gpioa 13 1>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+ };
-+
-+ reg_3v3: regulator_3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3V3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ vin-supply = <&v3v3>;
-+ };
-+};
-+
-+&sdmmc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
-+ bus-width = <4>;
-+ cd-gpios = <&gpioh 3 1>;
-+ disable-wp;
-+ no-1-8-v;
-+ st,neg-edge;
-+ vmmc-supply = <®_3v3>;
-+ status = "okay";
-+};
-+
-+&sdmmc1_b4_pins_a {
-+ /*
-+ * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
-+ * work, thus enable internal pull-ups.
-+ */
-+ pins1 {
-+ /delete-property/ bias-disable;
-+ bias-pull-up;
-+ };
-+ pins2 {
-+ /delete-property/ bias-disable;
-+ bias-pull-up;
-+ };
-+};
-+
-+&sdmmc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc2_b4_pins_a &mc1_sdmmc2_d47_pins_b>;
-+ bus-width = <8>;
-+ no-1-8-v;
-+ no-sd;
-+ no-sdio;
-+ non-removable;
-+ st,neg-edge;
-+ vmmc-supply = <®_3v3>;
-+ status = "okay";
-+};
-+
-+&uart4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart4_pins_a>;
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ mc1_sdmmc2_d47_pins_b: mc1-sdmmc2-d47-1 {
-+ pins {
-+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-+ slew-rate = <1>;
-+ drive-push-pull;
-+ bias-disable;
-+ };
-+ };
-+};
-diff --git a/fdts/stm32mp15xx-osd32.dtsi b/fdts/stm32mp15xx-osd32.dtsi
-new file mode 100644
-index 000000000000..9db838ea6b56
---- /dev/null
-+++ b/fdts/stm32mp15xx-osd32.dtsi
-@@ -0,0 +1,278 @@
-+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-+/*
-+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
-+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
-+ */
-+
-+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
-+#include "stm32mp15-pinctrl.dtsi"
-+
-+&i2c4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c4_pins_a>;
-+ clock-frequency = <400000>;
-+ i2c-scl-rising-time-ns = <185>;
-+ i2c-scl-falling-time-ns = <20>;
-+ status = "okay";
-+
-+ pmic: stpmic@33 {
-+ compatible = "st,stpmic1";
-+ reg = <0x33>;
-+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+
-+ regulators {
-+ compatible = "st,stpmic1-regulators";
-+
-+ ldo1-supply = <&v3v3>;
-+ ldo6-supply = <&v3v3>;
-+ pwr_sw1-supply = <&bst_out>;
-+
-+ vddcore: buck1 {
-+ regulator-name = "vddcore";
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-always-on;
-+ regulator-initial-mode = <0>;
-+ regulator-over-current-protection;
-+ };
-+
-+ vdd_ddr: buck2 {
-+ regulator-name = "vdd_ddr";
-+ regulator-min-microvolt = <1350000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-always-on;
-+ regulator-initial-mode = <0>;
-+ regulator-over-current-protection;
-+ };
-+
-+ vdd: buck3 {
-+ regulator-name = "vdd";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ st,mask-reset;
-+ regulator-initial-mode = <0>;
-+ regulator-over-current-protection;
-+ };
-+
-+ v3v3: buck4 {
-+ regulator-name = "v3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ regulator-over-current-protection;
-+ regulator-initial-mode = <0>;
-+ };
-+
-+ v1v8_audio: ldo1 {
-+ regulator-name = "v1v8_audio";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ v3v3_hdmi: ldo2 {
-+ regulator-name = "v3v3_hdmi";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vtt_ddr: ldo3 {
-+ regulator-name = "vtt_ddr";
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <750000>;
-+ regulator-always-on;
-+ regulator-over-current-protection;
-+ };
-+
-+ vdd_usb: ldo4 {
-+ regulator-name = "vdd_usb";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vdda: ldo5 {
-+ regulator-name = "vdda";
-+ regulator-min-microvolt = <2900000>;
-+ regulator-max-microvolt = <2900000>;
-+ regulator-boot-on;
-+ };
-+
-+ v1v2_hdmi: ldo6 {
-+ regulator-name = "v1v2_hdmi";
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+ regulator-always-on;
-+ };
-+
-+ vref_ddr: vref_ddr {
-+ regulator-name = "vref_ddr";
-+ regulator-always-on;
-+ regulator-over-current-protection;
-+ };
-+
-+ bst_out: boost {
-+ regulator-name = "bst_out";
-+ };
-+
-+ vbus_otg: pwr_sw1 {
-+ regulator-name = "vbus_otg";
-+ regulator-active-discharge;
-+ };
-+
-+ vbus_sw: pwr_sw2 {
-+ regulator-name = "vbus_sw";
-+ regulator-active-discharge;
-+ };
-+ };
-+
-+ pmic_watchdog: watchdog {
-+ compatible = "st,stpmic1-wdt";
-+ status = "disabled";
-+ };
-+ };
-+};
-+
-+&rng1 {
-+ status = "okay";
-+};
-+
-+/* ATF Specific */
-+#include <dt-bindings/clock/stm32mp1-clksrc.h>
-+
-+/ {
-+ aliases {
-+ gpio0 = &gpioa;
-+ gpio1 = &gpiob;
-+ gpio2 = &gpioc;
-+ gpio3 = &gpiod;
-+ gpio4 = &gpioe;
-+ gpio5 = &gpiof;
-+ gpio6 = &gpiog;
-+ gpio7 = &gpioh;
-+ gpio8 = &gpioi;
-+ gpio25 = &gpioz;
-+ i2c3 = &i2c4;
-+ };
-+};
-+
-+&bsec {
-+ board_id: board_id@ec {
-+ reg = <0xec 0x4>;
-+ st,non-secure-otp;
-+ };
-+};
-+
-+&clk_hse {
-+ st,digbypass;
-+};
-+
-+&cpu0{
-+ cpu-supply = <&vddcore>;
-+};
-+
-+&cpu1{
-+ cpu-supply = <&vddcore>;
-+};
-+
-+/* CLOCK init */
-+&rcc {
-+ secure-status = "disabled";
-+ st,clksrc = <
-+ CLK_MPU_PLL1P
-+ CLK_AXI_PLL2P
-+ CLK_MCU_PLL3P
-+ CLK_PLL12_HSE
-+ CLK_PLL3_HSE
-+ CLK_PLL4_HSE
-+ CLK_RTC_LSE
-+ CLK_MCO1_DISABLED
-+ CLK_MCO2_DISABLED
-+ >;
-+
-+ st,clkdiv = <
-+ 1 /*MPU*/
-+ 0 /*AXI*/
-+ 0 /*MCU*/
-+ 1 /*APB1*/
-+ 1 /*APB2*/
-+ 1 /*APB3*/
-+ 1 /*APB4*/
-+ 2 /*APB5*/
-+ 23 /*RTC*/
-+ 0 /*MCO1*/
-+ 0 /*MCO2*/
-+ >;
-+
-+ st,pkcs = <
-+ CLK_CKPER_HSE
-+ CLK_FMC_ACLK
-+ CLK_QSPI_ACLK
-+ CLK_ETH_PLL4P
-+ CLK_SDMMC12_PLL4P
-+ CLK_DSI_DSIPLL
-+ CLK_STGEN_HSE
-+ CLK_USBPHY_HSE
-+ CLK_SPI2S1_PLL3Q
-+ CLK_SPI2S23_PLL3Q
-+ CLK_SPI45_HSI
-+ CLK_SPI6_HSI
-+ CLK_I2C46_HSI
-+ CLK_SDMMC3_PLL4P
-+ CLK_USBO_USBPHY
-+ CLK_ADC_CKPER
-+ CLK_CEC_LSE
-+ CLK_I2C12_HSI
-+ CLK_I2C35_HSI
-+ CLK_UART1_HSI
-+ CLK_UART24_HSI
-+ CLK_UART35_HSI
-+ CLK_UART6_HSI
-+ CLK_UART78_HSI
-+ CLK_SPDIF_PLL4P
-+ CLK_FDCAN_PLL4R
-+ CLK_SAI1_PLL3Q
-+ CLK_SAI2_PLL3Q
-+ CLK_SAI3_PLL3Q
-+ CLK_SAI4_PLL3Q
-+ CLK_RNG1_LSI
-+ CLK_RNG2_LSI
-+ CLK_LPTIM1_PCLK1
-+ CLK_LPTIM23_PCLK3
-+ CLK_LPTIM45_LSE
-+ >;
-+
-+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
-+ pll1: st,pll@0 {
-+ compatible = "st,stm32mp1-pll";
-+ reg = <0>;
-+ cfg = < 2 80 0 0 0 PQR(1,0,0) >;
-+ frac = < 0x800 >;
-+ };
-+
-+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
-+ pll2: st,pll@1 {
-+ compatible = "st,stm32mp1-pll";
-+ reg = <1>;
-+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
-+ frac = <0x1400>;
-+ };
-+
-+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
-+ pll3: st,pll@2 {
-+ compatible = "st,stm32mp1-pll";
-+ reg = <2>;
-+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
-+ frac = <0x1a04>;
-+ };
-+
-+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
-+ pll4: st,pll@3 {
-+ compatible = "st,stm32mp1-pll";
-+ reg = <3>;
-+ cfg = <3 98 5 7 7 PQR(1,1,1)>;
-+ };
-+};
diff --git a/configs/platform-v7a/patches/tf-a-v2.4/0101-fdts-stm32mp1-enable-hash1-unconditionally.patch b/configs/platform-v7a/patches/tf-a-v2.4/0101-fdts-stm32mp1-enable-hash1-unconditionally.patch
deleted file mode 100644
index c05c02cb6fcf..000000000000
--- a/configs/platform-v7a/patches/tf-a-v2.4/0101-fdts-stm32mp1-enable-hash1-unconditionally.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Ahmad Fatoum <a.fatoum@pengutronix.de>
-Date: Thu, 3 Dec 2020 20:24:53 +0100
-Subject: [PATCH] fdts: stm32mp1: enable hash1 unconditionally
-
-&hash1 is an internal IP that can be enabled always as it has no
-dependencies. Indeed we must enable it, because TF-A panics otherwise
-during stm32mp_init_auth(). Instead of duplicating the enabling
-line in every board device tree, stick it into the SoC dtsi.
-
-This likely fixes boot on the Avenger board that lacks the status =
-"okay" line for the &hash1 device tree node.
-
-Change-Id: I5901029f29af0cf213510878b5daaf5240f96f17
-Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
----
- fdts/stm32mp151.dtsi | 2 +-
- fdts/stm32mp157c-ed1.dts | 4 ----
- fdts/stm32mp15xx-dkx.dtsi | 4 ----
- 3 files changed, 1 insertion(+), 9 deletions(-)
-
-diff --git a/fdts/stm32mp151.dtsi b/fdts/stm32mp151.dtsi
-index 8f175a6492a1..d908b710bbb9 100644
---- a/fdts/stm32mp151.dtsi
-+++ b/fdts/stm32mp151.dtsi
-@@ -253,7 +253,7 @@
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
-- status = "disabled";
-+ status = "okay";
- };
-
- rng1: rng@54003000 {
-diff --git a/fdts/stm32mp157c-ed1.dts b/fdts/stm32mp157c-ed1.dts
-index a6b98b7d9337..615e2cc07578 100644
---- a/fdts/stm32mp157c-ed1.dts
-+++ b/fdts/stm32mp157c-ed1.dts
-@@ -55,10 +55,6 @@
- status="okay";
- };
-
--&hash1 {
-- status = "okay";
--};
--
- &i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins_a>;
-diff --git a/fdts/stm32mp15xx-dkx.dtsi b/fdts/stm32mp15xx-dkx.dtsi
-index 52b914b84e45..e59a65fb5555 100644
---- a/fdts/stm32mp15xx-dkx.dtsi
-+++ b/fdts/stm32mp15xx-dkx.dtsi
-@@ -41,10 +41,6 @@
- cpu-supply = <&vddcore>;
- };
-
--&hash1 {
-- status = "okay";
--};
--
- &i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins_a>;
diff --git a/configs/platform-v7a/patches/tf-a-v2.4/series b/configs/platform-v7a/patches/tf-a-v2.4/series
deleted file mode 100644
index 39ffbf38ab5c..000000000000
--- a/configs/platform-v7a/patches/tf-a-v2.4/series
+++ /dev/null
@@ -1,12 +0,0 @@
-# umpf-base: v2.4
-# umpf-name: 2.4/customers/pengutronix/distrokit-v7a
-# umpf-version: 2.4/customers/pengutronix/distrokit-v7a/20201203-3
-# umpf-topic: v2.4/customers/pengutronix/mc1
-# umpf-hashinfo: 21a3904995b9fbfe16f6b4d4e9db1c03d102a485
-# umpf-topic-range: e2c509a39c6cc4dda8734e6509cdbe6e3603cdfc..ffb9bfe900a2d98486ed63f8041d63cfa39620db
-0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch
-# umpf-topic: v2.4/topic/stm32mp1-hash1-enable
-# umpf-hashinfo: c23c95a1eca7d557650836929252eb3c5cb3ca86
-# umpf-topic-range: ffb9bfe900a2d98486ed63f8041d63cfa39620db..10935b6d4379f0e8f8634cca1ac1cb69a66436e0
-0101-fdts-stm32mp1-enable-hash1-unconditionally.patch
-# umpf-end
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index db0c5cf7b320..7f64bd8c0f32 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -194,8 +194,8 @@ PTXCONF_BOOTLOADER=y
# PTXCONF_HOST_MXS_UTILS is not set
# PTXCONF_OPTEE is not set
PTXCONF_TF_A=y
-PTXCONF_TF_A_VERSION="v2.4"
-PTXCONF_TF_A_MD5="a1e9d1fab56bc2930355318dce80910e"
+PTXCONF_TF_A_VERSION="v2.5"
+PTXCONF_TF_A_MD5="465555f290f7bb785a3471d704ca33da"
PTXCONF_TF_A_ARCH_STRING="aarch32"
PTXCONF_TF_A_ARM_ARCH_MAJOR_7=y
# PTXCONF_TF_A_ARM_ARCH_MAJOR_8_32_BIT is not set
--
2.30.2
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [DistroKit] [PATCH] v7a: tf-a: update to v2.5 for LXA MC-1 support
2021-07-06 4:57 [DistroKit] [PATCH] v7a: tf-a: update to v2.5 for LXA MC-1 support Ahmad Fatoum
@ 2021-07-06 5:37 ` Robert Schwebel
0 siblings, 0 replies; 2+ messages in thread
From: Robert Schwebel @ 2021-07-06 5:37 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: distrokit
On Tue, Jul 06, 2021 at 06:57:40AM +0200, Ahmad Fatoum wrote:
> The v2.5 release of the ARM trusted firmware now contains support
> for the Linux Automation MC-1, allowing us to drop our board support
> patches. Use it.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> ...d-support-for-Linux-Automation-MC-1-.patch | 419 ------------------
> ...tm32mp1-enable-hash1-unconditionally.patch | 63 ---
> configs/platform-v7a/patches/tf-a-v2.4/series | 12 -
> configs/platform-v7a/platformconfig | 4 +-
> 4 files changed, 2 insertions(+), 496 deletions(-)
> delete mode 100644 configs/platform-v7a/patches/tf-a-v2.4/0001-fdts-stm32mp1-add-support-for-Linux-Automation-MC-1-.patch
> delete mode 100644 configs/platform-v7a/patches/tf-a-v2.4/0101-fdts-stm32mp1-enable-hash1-unconditionally.patch
> delete mode 100644 configs/platform-v7a/patches/tf-a-v2.4/series
Applied to next.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-07-06 5:37 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-06 4:57 [DistroKit] [PATCH] v7a: tf-a: update to v2.5 for LXA MC-1 support Ahmad Fatoum
2021-07-06 5:37 ` Robert Schwebel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox