From: Robert Schwebel <r.schwebel@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH 1/6] v7a_noneon: barebox: update to v2024.07.0
Date: Wed, 14 Aug 2024 09:59:18 +0200 [thread overview]
Message-ID: <Zrxj1oePEa7L6nhp@pengutronix.de> (raw)
In-Reply-To: <20240801113819.3981009-1-a.fatoum@pengutronix.de>
Could you resend the series and check that it still fits on top of next?
b4 seems to be disturbed by Rohieb's MIPS series being a reply to this
thread.
On Thu, Aug 01, 2024 at 01:38:14PM +0200, Ahmad Fatoum wrote:
> Besides being a year newer, this update allows us to drop the patches we
> have carrying around.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> .../platform-v7a_noneon/barebox-at91.config | 90 +++++--
> .../barebox-at91.config.diff | 19 +-
> .../barebox-vexpress.config | 81 +++++--
> .../barebox-vexpress.config.diff | 5 +-
> configs/platform-v7a_noneon/barebox.config | 84 +++++--
> ...nable-ddramc-for-sama5d3-and-sama5d4.patch | 32 ---
> ...port-for-SAMA5D3-Ethernet-Developmen.patch | 219 ------------------
> ...ip-ksz9477-evb-migrate-to-sama5d3_ba.patch | 23 --
> ...0-customers-pengutronix-distrokit-sa.patch | 22 --
> .../patches/barebox-2023.07.1/series | 13 --
> configs/platform-v7a_noneon/platformconfig | 4 +-
> 11 files changed, 234 insertions(+), 358 deletions(-)
> delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
> delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
> delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
> delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
> delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
>
> diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
> index c24b5d36b79d..97f5f2b95031 100644
> --- a/configs/platform-v7a_noneon/barebox-at91.config
> +++ b/configs/platform-v7a_noneon/barebox-at91.config
> @@ -1,11 +1,11 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2023.07.1-20230706-1 Configuration
> +# Barebox/arm 2024.07.0 Configuration
> #
> CONFIG_ARM=y
> +CONFIG_ARCH_TEXT_BASE=0x00000000
> CONFIG_ARM_LINUX=y
> CONFIG_ARM_USE_COMPRESSED_DTB=y
> -CONFIG_TEXT_BASE=0x0
>
> #
> # System Type
> @@ -13,18 +13,11 @@ CONFIG_TEXT_BASE=0x0
> # CONFIG_ARCH_MULTIARCH is not set
> CONFIG_ARCH_AT91=y
> # CONFIG_ARCH_CLPS711X is not set
> -# CONFIG_ARCH_DAVINCI is not set
> -# CONFIG_ARCH_DIGIC is not set
> -# CONFIG_ARCH_EP93XX is not set
> -# CONFIG_ARCH_LAYERSCAPE is not set
> # CONFIG_ARCH_MVEBU is not set
> # CONFIG_ARCH_MXS is not set
> -# CONFIG_ARCH_NOMADIK is not set
> -# CONFIG_ARCH_OMAP_SINGLE is not set
> # CONFIG_ARCH_PXA is not set
> # CONFIG_ARCH_SOCFPGA is not set
> # CONFIG_ARCH_TEGRA is not set
> -# CONFIG_ARCH_UEMD is not set
> # CONFIG_ARCH_ZYNQ is not set
> # CONFIG_ARCH_BCM283X is not set
> # CONFIG_ARCH_STM32MP is not set
> @@ -50,15 +43,16 @@ CONFIG_HAVE_AT91_DDRAMC=y
> CONFIG_AT91_MCI_PBL=y
> CONFIG_AT91SAM9_SMC=y
> CONFIG_HAVE_AT91SAM9_RST=y
> +CONFIG_SOC_SAM_V7=y
> CONFIG_SOC_SAMA5=y
> CONFIG_SOC_SAMA5_MULTI=y
> CONFIG_SOC_SAMA5D3=y
> -CONFIG_ARCH_TEXT_BASE=0x23f00000
>
> #
> # Atmel AT91 System-on-Chip
> #
> CONFIG_AT91_MULTI_BOARDS=y
> +# CONFIG_MACH_CALAO is not set
> # CONFIG_MACH_SKOV_ARM9CPU is not set
> # CONFIG_MACH_AT91SAM9263EK is not set
> # CONFIG_MACH_AT91SAM9X5EK is not set
> @@ -143,6 +137,7 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> CONFIG_STACK_SIZE=0x8000
> CONFIG_MALLOC_SIZE=0x0
> +CONFIG_MALLOC_ALIGNMENT=8
> # end of memory layout
>
> # CONFIG_EXPERIMENTAL is not set
> @@ -151,7 +146,9 @@ CONFIG_MALLOC_TLSF=y
> CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
> CONFIG_KALLSYMS=y
> CONFIG_RELOCATABLE=y
> +# CONFIG_PANIC_POWEROFF is not set
> # CONFIG_PANIC_HANG is not set
> +CONFIG_PANIC_RESET=y
> CONFIG_PROMPT="barebox:"
> CONFIG_BAUDRATE=115200
> CONFIG_CBSIZE=1024
> @@ -166,7 +163,6 @@ CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> CONFIG_MENU=y
> # CONFIG_PASSWORD is not set
> -CONFIG_DYNAMIC_CRC_TABLE=y
> CONFIG_ERRNO_MESSAGES=y
> CONFIG_TIMESTAMP=y
> CONFIG_BOOTM=y
> @@ -174,7 +170,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
> # CONFIG_BOOTM_VERBOSE is not set
> CONFIG_BOOTM_INITRD=y
> CONFIG_BOOTM_OFTREE=y
> -CONFIG_BOOTM_OFTREE_UIMAGE=y
> +# CONFIG_BOOTM_UIMAGE is not set
> # CONFIG_BOOTM_AIMAGE is not set
> # CONFIG_BOOTM_ELF is not set
> # CONFIG_BOOTM_FITIMAGE is not set
> @@ -195,6 +191,7 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
> CONFIG_PBL_CONSOLE=y
> # CONFIG_CONSOLE_RATP is not set
> CONFIG_PARTITION=y
> +CONFIG_PARTITION_MANIPULATION=y
> CONFIG_PARTITION_DISK=y
> CONFIG_PARTITION_DISK_DOS=y
> CONFIG_PARTITION_DISK_EFI=y
> @@ -234,11 +231,14 @@ CONFIG_FASTBOOT_CMD_OEM=y
> #
> CONFIG_COMPILE_LOGLEVEL=6
> CONFIG_DEFAULT_LOGLEVEL=6
> +CONFIG_HAS_DEBUG_LL=y
> # CONFIG_DEBUG_LL is not set
> CONFIG_DEBUG_AT91_UART_BASE=0xffffee00
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_DEBUG_PBL is not set
> # CONFIG_DEBUG_PROBES is not set
> +# CONFIG_DMA_API_DEBUG is not set
> +# CONFIG_DEBUG_LIST is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_PRINTF_FULL is not set
> # CONFIG_UBSAN is not set
> @@ -252,9 +252,9 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
> #
> # EFI (Extensible Firmware Interface) Support
> #
> +CONFIG_HAVE_EFI_STUB=y
> # end of EFI (Extensible Firmware Interface) Support
>
> -CONFIG_HAS_DEBUG_LL=y
> CONFIG_COMMAND_SUPPORT=y
> CONFIG_COMPILE_HASH=y
>
> @@ -310,6 +310,8 @@ CONFIG_CMD_UIMAGE=y
> # CONFIG_CMD_PARTITION is not set
> CONFIG_CMD_AUTOMOUNT=y
> CONFIG_CMD_MOUNT=y
> +# CONFIG_CMD_FINDMNT is not set
> +CONFIG_CMD_PARTED=y
> CONFIG_CMD_UBI=y
> CONFIG_CMD_UBIFORMAT=y
> CONFIG_CMD_UMOUNT=y
> @@ -439,6 +441,7 @@ CONFIG_CMD_USBGADGET=y
> CONFIG_CMD_BAREBOX_UPDATE=y
> # CONFIG_CMD_BLOBGEN is not set
> # CONFIG_CMD_FIRMWARELOAD is not set
> +# CONFIG_CMD_KALLSYMS is not set
> # CONFIG_CMD_OF_COMPATIBLE is not set
> # CONFIG_CMD_OF_DIFF is not set
> CONFIG_CMD_OF_DUMP=y
> @@ -454,6 +457,7 @@ CONFIG_CMD_TIME=y
> # CONFIG_CMD_DHRYSTONE is not set
> # CONFIG_CMD_SPD_DECODE is not set
> # CONFIG_CMD_SEED is not set
> +# CONFIG_CMD_STACKSMASH is not set
> # end of Miscellaneous
> # end of Commands
>
> @@ -475,6 +479,7 @@ CONFIG_REGMAP_SPI=y
> CONFIG_OFTREE=y
> CONFIG_OFTREE_MEM_GENERIC=y
> CONFIG_DTC=y
> +CONFIG_OF=y
> CONFIG_OFDEVICE=y
> CONFIG_OF_GPIO=y
> CONFIG_OF_BAREBOX_DRIVERS=y
> @@ -523,6 +528,7 @@ CONFIG_DRIVER_NET_MICREL=y
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_DP83867_PHY is not set
> # CONFIG_DP83TD510_PHY is not set
> +# CONFIG_DP83TG720_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> CONFIG_MICREL_PHY=y
> @@ -597,17 +603,38 @@ CONFIG_MTD_M25P80=y
> # end of Self contained MTD devices
>
> # CONFIG_DRIVER_CFI is not set
> +
> +#
> +# NAND
> +#
> +CONFIG_MTD_NAND_CORE=y
> +CONFIG_MTD_RAW_NAND=y
> CONFIG_NAND=y
> CONFIG_MTD_NAND_ECC_SOFT=y
> -CONFIG_MTD_NAND_ECC_SW_BCH=y
> # CONFIG_NAND_ECC_HW_SYNDROME is not set
> # CONFIG_NAND_ALLOW_ERASE_BAD is not set
> +CONFIG_NAND_NEED_EXEC_OP=y
> +
> +#
> +# Raw/parallel NAND flash controllers
> +#
> CONFIG_NAND_ATMEL=y
> # CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> # CONFIG_MTD_NAND_DENALI is not set
> +
> +#
> +# ECC engine support
> +#
> +CONFIG_MTD_NAND_ECC=y
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
> +CONFIG_MTD_NAND_ECC_SW_BCH=y
> +# end of ECC engine support
> +# end of NAND
> +
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> # CONFIG_SPI_CADENCE_QUADSPI is not set
> +# CONFIG_SPI_SYNOPSYS_OCTALSPI_NOR is not set
> CONFIG_MTD_UBI=y
> CONFIG_MTD_UBI_BEB_LIMIT=20
> # CONFIG_MTD_UBI_FASTMAP is not set
> @@ -669,6 +696,7 @@ CONFIG_MCI=y
> #
> # --- Feature list ---
> #
> +# CONFIG_MCI_TUNING is not set
> # CONFIG_MCI_STARTUP is not set
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> @@ -678,11 +706,13 @@ CONFIG_MCI_MMC_BOOT_PARTITIONS=y
> #
> # --- MCI host drivers ---
> #
> +# CONFIG_MCI_DWC_MSHC is not set
> # CONFIG_MCI_DW is not set
> # CONFIG_MCI_ROCKCHIP_DWCMSHC is not set
> CONFIG_MCI_ATMEL=y
> CONFIG_MCI_ATMEL_SDHCI=y
> # CONFIG_MCI_ARASAN is not set
> +# CONFIG_MCI_AM654 is not set
> # CONFIG_MCI_SPI is not set
> CONFIG_MCI_ATMEL_PBL=y
> CONFIG_HAVE_CLK=y
> @@ -715,6 +745,7 @@ CONFIG_MFD_SYSCON=y
> # CONFIG_MFD_TWL4030 is not set
> # CONFIG_MFD_TWL6030 is not set
> # CONFIG_MFD_STPMIC1 is not set
> +# CONFIG_MFD_PCA9450 is not set
> # CONFIG_MFD_RN568PMIC is not set
> # CONFIG_MFD_ATMEL_FLEXCOM is not set
> # CONFIG_MFD_RK808 is not set
> @@ -751,6 +782,7 @@ CONFIG_LED_TRIGGERS=y
> #
> # Input device support
> #
> +# CONFIG_INPUT_EVBUG is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_USB is not set
> @@ -833,6 +865,12 @@ CONFIG_REGULATOR_FIXED=y
> #
> # CONFIG_FIRMWARE_ALTERA_SERIAL is not set
> # CONFIG_QEMU_FW_CFG is not set
> +
> +#
> +# ARM System Control and Management Interface Protocol
> +#
> +# CONFIG_ARM_SCMI_PROTOCOL is not set
> +# end of ARM System Control and Management Interface Protocol
> # end of Firmware Drivers
>
> #
> @@ -869,6 +907,16 @@ CONFIG_ATMEL_EBI=y
> # end of KVX SoC drivers
> # end of SoC drivers
>
> +#
> +# PM Domains
> +#
> +
> +#
> +# i.MX PM Domains
> +#
> +# end of i.MX PM Domains
> +# end of PM Domains
> +
> #
> # NVME Support
> #
> @@ -881,6 +929,8 @@ CONFIG_ATMEL_EBI=y
> # CONFIG_POWER_RESET_GPIO_RESTART is not set
> CONFIG_VIRTIO_MENU=y
> # CONFIG_VIRTIO_MMIO is not set
> +# CONFIG_MAILBOX is not set
> +# CONFIG_TEE is not set
> # end of Drivers
>
> #
> @@ -953,6 +1003,7 @@ CONFIG_ZSTD_DECOMPRESS=y
> CONFIG_PROCESS_ESCAPE_SEQUENCE=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_BCH=y
> +CONFIG_BITREV=y
> CONFIG_FNMATCH=y
> CONFIG_QSORT=y
> CONFIG_LIBSCAN=y
> @@ -977,6 +1028,17 @@ CONFIG_ARCH_HAS_ZERO_PAGE=y
> CONFIG_GENERIC_ALLOCATOR=y
> # end of Library routines
>
> +#
> +# Hardening options
> +#
> +# CONFIG_BUG_ON_DATA_CORRUPTION is not set
> +CONFIG_STACK_GUARD_PAGE=y
> +CONFIG_STACKPROTECTOR_NONE=y
> +# CONFIG_STACKPROTECTOR_STRONG is not set
> +CONFIG_PBL_STACKPROTECTOR_NONE=y
> +# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
> +# end of Hardening options
> +
> #
> # Crypto support
> #
> diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
> index e2cdc16d00ff..9f362cd4f8aa 100644
> --- a/configs/platform-v7a_noneon/barebox-at91.config.diff
> +++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
> @@ -1,14 +1,13 @@
> -71b0583d9737e188a32240ae7d29a558
> +e4e5faf13c3a7da2755222882364530a
> CONFIG_ARCH_AT91=y
> # CONFIG_ARCH_BCM283X is not set
> # CONFIG_ARCH_IMX is undefined
> +# CONFIG_ARCH_LAYERSCAPE is undefined
> # CONFIG_ARCH_MULTIARCH is not set
> # CONFIG_ARCH_OMAP_MULTI is undefined
> # CONFIG_ARCH_ROCKCHIP is undefined
> -CONFIG_ARCH_TEXT_BASE=0x23f00000
> # CONFIG_ARM_AMBA is undefined
> # CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
> -# CONFIG_ARM_SCMI_PROTOCOL is undefined
> # CONFIG_ARM_SECURE_MONITOR is undefined
> # CONFIG_ARM_SMCCC is undefined
> CONFIG_AT91SAM9_SMC=y
> @@ -16,11 +15,12 @@ CONFIG_AT91_MCI_PBL=y
> CONFIG_AT91_MULTI_BOARDS=y
> CONFIG_ATMEL_EBI=y
> CONFIG_BCH=y
> +CONFIG_BITREV=y
> # CONFIG_BOARD_ARM_GENERIC_DT is not set
> # CONFIG_BOARD_GENERIC_DT is undefined
> -CONFIG_BOOTM_OFTREE_UIMAGE=y
> # CONFIG_BOOTM_VERBOSE is not set
> # CONFIG_BZLIB is not set
> +# CONFIG_CADENCE_WATCHDOG is undefined
> CONFIG_CLOCKSOURCE_ATMEL_PIT=y
> # CONFIG_CLOCKSOURCE_BCM283X is undefined
> # CONFIG_CMD_ARM_MMUINFO is not set
> @@ -89,6 +89,9 @@ CONFIG_HAVE_AT91_USB_CLK=y
> CONFIG_HAVE_AT91_UTMI=y
> # CONFIG_HAVE_DIGEST_SHA1 is undefined
> # CONFIG_HWRNG is not set
> +# CONFIG_HW_RANDOM_BCM2835 is undefined
> +# CONFIG_HW_RANDOM_IPROC_RNG200 is undefined
> +# CONFIG_HW_RANDOM_TIMERIOMEM is undefined
> # CONFIG_I2C_ALGOBIT is undefined
> # CONFIG_I2C_AT91 is not set
> # CONFIG_I2C_BCM283X is undefined
> @@ -102,6 +105,7 @@ CONFIG_LIBUBIGEN=y
> # CONFIG_MACHINE_ID is undefined
> # CONFIG_MACH_AT91SAM9263EK is not set
> # CONFIG_MACH_AT91SAM9X5EK is not set
> +# CONFIG_MACH_CALAO is not set
> CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
> CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
> # CONFIG_MACH_RPI2 is undefined
> @@ -132,10 +136,13 @@ CONFIG_MFD_SYSCON=y
> CONFIG_MICREL_PHY=y
> # CONFIG_MMUINFO is undefined
> CONFIG_MTD_M25P80=y
> +CONFIG_MTD_NAND_CORE=y
> # CONFIG_MTD_NAND_DENALI is not set
> +CONFIG_MTD_NAND_ECC=y
> CONFIG_MTD_NAND_ECC_SOFT=y
> CONFIG_MTD_NAND_ECC_SW_BCH=y
> # CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> +CONFIG_MTD_RAW_NAND=y
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> # CONFIG_MTD_SST25L is not set
> @@ -148,6 +155,7 @@ CONFIG_NAND=y
> # CONFIG_NAND_ALLOW_ERASE_BAD is not set
> CONFIG_NAND_ATMEL=y
> # CONFIG_NAND_ECC_HW_SYNDROME is not set
> +CONFIG_NAND_NEED_EXEC_OP=y
> CONFIG_NET_USB_RTL8152=y
> CONFIG_OF_BAREBOX_ENV_IN_FS=y
> # CONFIG_OF_OVERLAY is not set
> @@ -167,9 +175,11 @@ CONFIG_REGULATOR_FIXED=y
> CONFIG_SOC_SAMA5=y
> CONFIG_SOC_SAMA5D3=y
> CONFIG_SOC_SAMA5_MULTI=y
> +CONFIG_SOC_SAM_V7=y
> CONFIG_SPI_ATMEL_QUADSPI=y
> # CONFIG_SPI_CADENCE_QUADSPI is not set
> CONFIG_SPI_MEM=y
> +# CONFIG_SPI_SYNOPSYS_OCTALSPI_NOR is not set
> # CONFIG_STATE is not set
> # CONFIG_STATE_BACKWARD_COMPATIBLE is undefined
> # CONFIG_STATE_CRYPTO is undefined
> @@ -198,6 +208,7 @@ CONFIG_W1=y
> # CONFIG_WATCHDOG_POLLER is undefined
> CONFIG_XXHASH=y
> # CONFIG_XZ_DECOMPRESS is not set
> +# CONFIG_XZ_DEC_ARM64 is undefined
> # CONFIG_XZ_DEC_ARM is undefined
> # CONFIG_XZ_DEC_ARMTHUMB is undefined
> # CONFIG_XZ_DEC_IA64 is undefined
> diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config
> index 09f112d397e1..9423207ea413 100644
> --- a/configs/platform-v7a_noneon/barebox-vexpress.config
> +++ b/configs/platform-v7a_noneon/barebox-vexpress.config
> @@ -1,10 +1,10 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2023.07.1-20230706-1 Configuration
> +# Barebox/arm 2024.07.0 Configuration
> #
> CONFIG_ARM=y
> +CONFIG_ARCH_TEXT_BASE=0x00000000
> CONFIG_ARM_LINUX=y
> -CONFIG_TEXT_BASE=0x0
>
> #
> # System Type
> @@ -12,21 +12,15 @@ CONFIG_TEXT_BASE=0x0
> CONFIG_ARCH_MULTIARCH=y
> # CONFIG_ARCH_AT91 is not set
> # CONFIG_ARCH_CLPS711X is not set
> -# CONFIG_ARCH_DAVINCI is not set
> -# CONFIG_ARCH_DIGIC is not set
> -# CONFIG_ARCH_EP93XX is not set
> -# CONFIG_ARCH_LAYERSCAPE is not set
> # CONFIG_ARCH_MVEBU is not set
> # CONFIG_ARCH_MXS is not set
> -# CONFIG_ARCH_NOMADIK is not set
> -# CONFIG_ARCH_OMAP_SINGLE is not set
> # CONFIG_ARCH_PXA is not set
> # CONFIG_ARCH_SOCFPGA is not set
> # CONFIG_ARCH_TEGRA is not set
> -# CONFIG_ARCH_UEMD is not set
> # CONFIG_ARCH_ZYNQ is not set
> # CONFIG_ARCH_BCM283X is not set
> # CONFIG_ARCH_IMX is not set
> +# CONFIG_ARCH_LAYERSCAPE is not set
> # CONFIG_ARCH_OMAP_MULTI is not set
> # CONFIG_ARCH_ROCKCHIP is not set
> # CONFIG_ARCH_STM32MP is not set
> @@ -44,7 +38,6 @@ CONFIG_CPU_32v7=y
> # processor features
> #
> # CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> -CONFIG_ARCH_TEXT_BASE=0x0
> CONFIG_MACH_VEXPRESS=y
> # CONFIG_MACH_VIRT is not set
> CONFIG_BOARD_ARM_GENERIC_DT=y
> @@ -120,6 +113,7 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> CONFIG_STACK_SIZE=0x8000
> CONFIG_MALLOC_SIZE=0x0
> +CONFIG_MALLOC_ALIGNMENT=8
> # end of memory layout
>
> # CONFIG_EXPERIMENTAL is not set
> @@ -128,7 +122,9 @@ CONFIG_MALLOC_TLSF=y
> CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
> CONFIG_KALLSYMS=y
> CONFIG_RELOCATABLE=y
> +# CONFIG_PANIC_POWEROFF is not set
> # CONFIG_PANIC_HANG is not set
> +CONFIG_PANIC_RESET=y
> CONFIG_PROMPT="vexpress: "
> CONFIG_BAUDRATE=115200
> CONFIG_CBSIZE=1024
> @@ -144,7 +140,6 @@ CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> CONFIG_MENU=y
> # CONFIG_PASSWORD is not set
> -CONFIG_DYNAMIC_CRC_TABLE=y
> CONFIG_ERRNO_MESSAGES=y
> CONFIG_TIMESTAMP=y
> CONFIG_BOOTM=y
> @@ -152,7 +147,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
> CONFIG_BOOTM_VERBOSE=y
> CONFIG_BOOTM_INITRD=y
> CONFIG_BOOTM_OFTREE=y
> -# CONFIG_BOOTM_OFTREE_UIMAGE is not set
> +# CONFIG_BOOTM_UIMAGE is not set
> # CONFIG_BOOTM_AIMAGE is not set
> # CONFIG_BOOTM_ELF is not set
> # CONFIG_BOOTM_FITIMAGE is not set
> @@ -173,6 +168,7 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
> CONFIG_PBL_CONSOLE=y
> # CONFIG_CONSOLE_RATP is not set
> CONFIG_PARTITION=y
> +CONFIG_PARTITION_MANIPULATION=y
> CONFIG_PARTITION_DISK=y
> CONFIG_PARTITION_DISK_DOS=y
> CONFIG_PARTITION_DISK_EFI=y
> @@ -217,10 +213,13 @@ CONFIG_FASTBOOT_CMD_OEM=y
> #
> CONFIG_COMPILE_LOGLEVEL=7
> CONFIG_DEFAULT_LOGLEVEL=6
> +CONFIG_HAS_DEBUG_LL=y
> # CONFIG_DEBUG_LL is not set
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_DEBUG_PBL is not set
> # CONFIG_DEBUG_PROBES is not set
> +# CONFIG_DMA_API_DEBUG is not set
> +# CONFIG_DEBUG_LIST is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_PRINTF_FULL is not set
> # CONFIG_UBSAN is not set
> @@ -234,9 +233,9 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
> #
> # EFI (Extensible Firmware Interface) Support
> #
> +CONFIG_HAVE_EFI_STUB=y
> # end of EFI (Extensible Firmware Interface) Support
>
> -CONFIG_HAS_DEBUG_LL=y
> CONFIG_COMMAND_SUPPORT=y
> CONFIG_COMPILE_HASH=y
>
> @@ -290,6 +289,8 @@ CONFIG_CMD_UIMAGE=y
> CONFIG_CMD_PARTITION=y
> CONFIG_CMD_AUTOMOUNT=y
> CONFIG_CMD_MOUNT=y
> +# CONFIG_CMD_FINDMNT is not set
> +CONFIG_CMD_PARTED=y
> CONFIG_CMD_UMOUNT=y
> # end of Partition
>
> @@ -416,6 +417,7 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
> CONFIG_CMD_BAREBOX_UPDATE=y
> # CONFIG_CMD_BLOBGEN is not set
> # CONFIG_CMD_FIRMWARELOAD is not set
> +# CONFIG_CMD_KALLSYMS is not set
> # CONFIG_CMD_OF_COMPATIBLE is not set
> # CONFIG_CMD_OF_DIFF is not set
> CONFIG_CMD_OF_DUMP=y
> @@ -432,6 +434,7 @@ CONFIG_CMD_STATE=y
> # CONFIG_CMD_DHRYSTONE is not set
> # CONFIG_CMD_SPD_DECODE is not set
> # CONFIG_CMD_SEED is not set
> +# CONFIG_CMD_STACKSMASH is not set
> # end of Miscellaneous
> # end of Commands
>
> @@ -450,6 +453,7 @@ CONFIG_NET_FASTBOOT=y
> CONFIG_OFTREE=y
> CONFIG_OFTREE_MEM_GENERIC=y
> CONFIG_DTC=y
> +CONFIG_OF=y
> CONFIG_OFDEVICE=y
> CONFIG_OF_BAREBOX_DRIVERS=y
> # CONFIG_OF_BAREBOX_ENV_IN_FS is not set
> @@ -497,6 +501,7 @@ CONFIG_DRIVER_NET_SMC911X=y
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_DP83867_PHY is not set
> # CONFIG_DP83TD510_PHY is not set
> +# CONFIG_DP83TG720_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MICREL_PHY is not set
> @@ -566,7 +571,20 @@ CONFIG_DRIVER_CFI_BANK_WIDTH_2=y
> CONFIG_DRIVER_CFI_BANK_WIDTH_4=y
> # CONFIG_DRIVER_CFI_BANK_WIDTH_8 is not set
> # CONFIG_CFI_BUFFER_WRITE is not set
> +
> +#
> +# NAND
> +#
> # CONFIG_NAND is not set
> +
> +#
> +# ECC engine support
> +#
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
> +# CONFIG_MTD_NAND_ECC_SW_BCH is not set
> +# end of ECC engine support
> +# end of NAND
> +
> # CONFIG_MTD_SPI_NOR is not set
> # CONFIG_MTD_UBI is not set
> CONFIG_DISK=y
> @@ -616,6 +634,7 @@ CONFIG_MCI=y
> #
> # --- Feature list ---
> #
> +# CONFIG_MCI_TUNING is not set
> CONFIG_MCI_STARTUP=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> @@ -625,10 +644,12 @@ CONFIG_MCI_WRITE=y
> #
> # --- MCI host drivers ---
> #
> +# CONFIG_MCI_DWC_MSHC is not set
> # CONFIG_MCI_DW is not set
> # CONFIG_MCI_ROCKCHIP_DWCMSHC is not set
> CONFIG_MCI_MMCI=y
> # CONFIG_MCI_ARASAN is not set
> +# CONFIG_MCI_AM654 is not set
> # CONFIG_MCI_SPI is not set
> CONFIG_HAVE_CLK=y
> CONFIG_CLKDEV_LOOKUP=y
> @@ -660,6 +681,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
> # CONFIG_MFD_TWL4030 is not set
> # CONFIG_MFD_TWL6030 is not set
> # CONFIG_MFD_STPMIC1 is not set
> +# CONFIG_MFD_PCA9450 is not set
> # CONFIG_MFD_RN568PMIC is not set
> # CONFIG_MFD_ATMEL_FLEXCOM is not set
> # CONFIG_MFD_RK808 is not set
> @@ -691,6 +713,7 @@ CONFIG_LED_TRIGGERS=y
> #
> # Input device support
> #
> +# CONFIG_INPUT_EVBUG is not set
> # CONFIG_KEYBOARD_USB is not set
> # CONFIG_INPUT_SPECIALKEYS is not set
> # end of Input device support
> @@ -698,8 +721,10 @@ CONFIG_LED_TRIGGERS=y
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_POLLER is not set
> # CONFIG_WATCHDOG_DW is not set
> +# CONFIG_CADENCE_WATCHDOG is not set
> # CONFIG_PWM is not set
> CONFIG_HWRNG=y
> +# CONFIG_HW_RANDOM_TIMERIOMEM is not set
>
> #
> # DMA support
> @@ -737,6 +762,12 @@ CONFIG_REGULATOR=y
> # Firmware Drivers
> #
> # CONFIG_QEMU_FW_CFG is not set
> +
> +#
> +# ARM System Control and Management Interface Protocol
> +#
> +# CONFIG_ARM_SCMI_PROTOCOL is not set
> +# end of ARM System Control and Management Interface Protocol
> # end of Firmware Drivers
>
> #
> @@ -772,6 +803,16 @@ CONFIG_REGULATOR=y
> # end of KVX SoC drivers
> # end of SoC drivers
>
> +#
> +# PM Domains
> +#
> +
> +#
> +# i.MX PM Domains
> +#
> +# end of i.MX PM Domains
> +# end of PM Domains
> +
> #
> # NVME Support
> #
> @@ -780,6 +821,8 @@ CONFIG_REGULATOR=y
> # CONFIG_POWER_RESET_SYSCON is not set
> # CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
> # CONFIG_VIRTIO_MENU is not set
> +# CONFIG_MAILBOX is not set
> +# CONFIG_TEE is not set
> # end of Drivers
>
> #
> @@ -849,6 +892,7 @@ CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> +CONFIG_XZ_DEC_ARM64=y
> # CONFIG_BASE64 is not set
> CONFIG_PROCESS_ESCAPE_SEQUENCE=y
> CONFIG_LZO_DECOMPRESS=y
> @@ -874,6 +918,17 @@ CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
> CONFIG_ARCH_HAS_ZERO_PAGE=y
> # end of Library routines
>
> +#
> +# Hardening options
> +#
> +# CONFIG_BUG_ON_DATA_CORRUPTION is not set
> +CONFIG_STACK_GUARD_PAGE=y
> +CONFIG_STACKPROTECTOR_NONE=y
> +# CONFIG_STACKPROTECTOR_STRONG is not set
> +CONFIG_PBL_STACKPROTECTOR_NONE=y
> +# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
> +# end of Hardening options
> +
> #
> # Crypto support
> #
> diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> index 36ab78e8ebc3..23060c8178b1 100644
> --- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> +++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> @@ -1,8 +1,7 @@
> -71b0583d9737e188a32240ae7d29a558
> +e4e5faf13c3a7da2755222882364530a
> CONFIG_AMBA_SP804=y
> # CONFIG_ARCH_BCM283X is not set
> CONFIG_ARCH_VEXPRESS=y
> -# CONFIG_ARM_SCMI_PROTOCOL is undefined
> # CONFIG_ARM_SECURE_MONITOR is undefined
> # CONFIG_ARM_SMCCC is undefined
> # CONFIG_ARM_USE_COMPRESSED_DTB is undefined
> @@ -37,6 +36,8 @@ CONFIG_DRIVER_NET_SMC911X=y
> # CONFIG_GPIO_SIFIVE is undefined
> # CONFIG_GPIO_SX150X is undefined
> # CONFIG_GPIO_WATCHDOG is undefined
> +# CONFIG_HW_RANDOM_BCM2835 is undefined
> +# CONFIG_HW_RANDOM_IPROC_RNG200 is undefined
> # CONFIG_I2C_ALGOBIT is undefined
> # CONFIG_I2C_BCM283X is undefined
> # CONFIG_I2C_GPIO is undefined
> diff --git a/configs/platform-v7a_noneon/barebox.config b/configs/platform-v7a_noneon/barebox.config
> index 9bbc3745d184..8734770abc4d 100644
> --- a/configs/platform-v7a_noneon/barebox.config
> +++ b/configs/platform-v7a_noneon/barebox.config
> @@ -1,11 +1,11 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2023.07.1-20230706-1 Configuration
> +# Barebox/arm 2024.07.0 Configuration
> #
> CONFIG_ARM=y
> +CONFIG_ARCH_TEXT_BASE=0x00000000
> CONFIG_ARM_LINUX=y
> CONFIG_ARM_USE_COMPRESSED_DTB=y
> -CONFIG_TEXT_BASE=0x0
>
> #
> # System Type
> @@ -13,21 +13,15 @@ CONFIG_TEXT_BASE=0x0
> CONFIG_ARCH_MULTIARCH=y
> # CONFIG_ARCH_AT91 is not set
> # CONFIG_ARCH_CLPS711X is not set
> -# CONFIG_ARCH_DAVINCI is not set
> -# CONFIG_ARCH_DIGIC is not set
> -# CONFIG_ARCH_EP93XX is not set
> -# CONFIG_ARCH_LAYERSCAPE is not set
> # CONFIG_ARCH_MVEBU is not set
> # CONFIG_ARCH_MXS is not set
> -# CONFIG_ARCH_NOMADIK is not set
> -# CONFIG_ARCH_OMAP_SINGLE is not set
> # CONFIG_ARCH_PXA is not set
> # CONFIG_ARCH_SOCFPGA is not set
> # CONFIG_ARCH_TEGRA is not set
> -# CONFIG_ARCH_UEMD is not set
> # CONFIG_ARCH_ZYNQ is not set
> CONFIG_ARCH_BCM283X=y
> # CONFIG_ARCH_IMX is not set
> +# CONFIG_ARCH_LAYERSCAPE is not set
> # CONFIG_ARCH_OMAP_MULTI is not set
> # CONFIG_ARCH_ROCKCHIP is not set
> # CONFIG_ARCH_STM32MP is not set
> @@ -45,7 +39,6 @@ CONFIG_CPU_32v7=y
> # processor features
> #
> # CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> -CONFIG_ARCH_TEXT_BASE=0x0
> CONFIG_MACH_RPI_COMMON=y
> CONFIG_MACH_RPI_AARCH_32_64=y
>
> @@ -136,6 +129,7 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> CONFIG_STACK_SIZE=0x8000
> CONFIG_MALLOC_SIZE=0x0
> +CONFIG_MALLOC_ALIGNMENT=8
> # end of memory layout
>
> # CONFIG_EXPERIMENTAL is not set
> @@ -144,7 +138,9 @@ CONFIG_MALLOC_TLSF=y
> CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
> CONFIG_KALLSYMS=y
> CONFIG_RELOCATABLE=y
> +# CONFIG_PANIC_POWEROFF is not set
> # CONFIG_PANIC_HANG is not set
> +CONFIG_PANIC_RESET=y
> CONFIG_PROMPT="barebox>"
> CONFIG_BAUDRATE=115200
> CONFIG_CBSIZE=1024
> @@ -160,7 +156,6 @@ CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> CONFIG_MENU=y
> # CONFIG_PASSWORD is not set
> -CONFIG_DYNAMIC_CRC_TABLE=y
> CONFIG_ERRNO_MESSAGES=y
> CONFIG_TIMESTAMP=y
> CONFIG_BOOTM=y
> @@ -168,7 +163,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
> CONFIG_BOOTM_VERBOSE=y
> CONFIG_BOOTM_INITRD=y
> CONFIG_BOOTM_OFTREE=y
> -# CONFIG_BOOTM_OFTREE_UIMAGE is not set
> +# CONFIG_BOOTM_UIMAGE is not set
> # CONFIG_BOOTM_AIMAGE is not set
> # CONFIG_BOOTM_ELF is not set
> # CONFIG_BOOTM_FITIMAGE is not set
> @@ -189,6 +184,7 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
> # CONFIG_PBL_CONSOLE is not set
> # CONFIG_CONSOLE_RATP is not set
> CONFIG_PARTITION=y
> +CONFIG_PARTITION_MANIPULATION=y
> CONFIG_PARTITION_DISK=y
> CONFIG_PARTITION_DISK_DOS=y
> CONFIG_PARTITION_DISK_EFI=y
> @@ -233,9 +229,12 @@ CONFIG_FASTBOOT_CMD_OEM=y
> #
> CONFIG_COMPILE_LOGLEVEL=7
> CONFIG_DEFAULT_LOGLEVEL=6
> +CONFIG_HAS_DEBUG_LL=y
> # CONFIG_DEBUG_LL is not set
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_DEBUG_PROBES is not set
> +# CONFIG_DMA_API_DEBUG is not set
> +# CONFIG_DEBUG_LIST is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_PRINTF_FULL is not set
> # CONFIG_UBSAN is not set
> @@ -249,9 +248,9 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
> #
> # EFI (Extensible Firmware Interface) Support
> #
> +CONFIG_HAVE_EFI_STUB=y
> # end of EFI (Extensible Firmware Interface) Support
>
> -CONFIG_HAS_DEBUG_LL=y
> CONFIG_COMMAND_SUPPORT=y
> CONFIG_COMPILE_HASH=y
>
> @@ -305,6 +304,8 @@ CONFIG_CMD_UIMAGE=y
> CONFIG_CMD_PARTITION=y
> CONFIG_CMD_AUTOMOUNT=y
> CONFIG_CMD_MOUNT=y
> +# CONFIG_CMD_FINDMNT is not set
> +CONFIG_CMD_PARTED=y
> CONFIG_CMD_UMOUNT=y
> # end of Partition
>
> @@ -433,6 +434,7 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
> CONFIG_CMD_BAREBOX_UPDATE=y
> # CONFIG_CMD_BLOBGEN is not set
> # CONFIG_CMD_FIRMWARELOAD is not set
> +# CONFIG_CMD_KALLSYMS is not set
> # CONFIG_CMD_OF_COMPATIBLE is not set
> # CONFIG_CMD_OF_DIFF is not set
> CONFIG_CMD_OF_DUMP=y
> @@ -449,6 +451,7 @@ CONFIG_CMD_STATE=y
> # CONFIG_CMD_DHRYSTONE is not set
> # CONFIG_CMD_SPD_DECODE is not set
> # CONFIG_CMD_SEED is not set
> +# CONFIG_CMD_STACKSMASH is not set
> # end of Miscellaneous
> # end of Commands
>
> @@ -467,6 +470,7 @@ CONFIG_NET_FASTBOOT=y
> CONFIG_OFTREE=y
> CONFIG_OFTREE_MEM_GENERIC=y
> CONFIG_DTC=y
> +CONFIG_OF=y
> CONFIG_OFDEVICE=y
> CONFIG_OF_GPIO=y
> CONFIG_OF_BAREBOX_DRIVERS=y
> @@ -515,6 +519,7 @@ CONFIG_PHYLIB=y
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_DP83867_PHY is not set
> # CONFIG_DP83TD510_PHY is not set
> +# CONFIG_DP83TG720_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MICREL_PHY is not set
> @@ -582,7 +587,20 @@ CONFIG_MTD_OOB_DEVICE=y
> # end of Self contained MTD devices
>
> # CONFIG_DRIVER_CFI is not set
> +
> +#
> +# NAND
> +#
> # CONFIG_NAND is not set
> +
> +#
> +# ECC engine support
> +#
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
> +# CONFIG_MTD_NAND_ECC_SW_BCH is not set
> +# end of ECC engine support
> +# end of NAND
> +
> # CONFIG_MTD_SPI_NOR is not set
> # CONFIG_MTD_UBI is not set
> CONFIG_DISK=y
> @@ -632,6 +650,7 @@ CONFIG_MCI=y
> #
> # --- Feature list ---
> #
> +# CONFIG_MCI_TUNING is not set
> CONFIG_MCI_STARTUP=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> @@ -641,12 +660,14 @@ CONFIG_MCI_WRITE=y
> #
> # --- MCI host drivers ---
> #
> +# CONFIG_MCI_DWC_MSHC is not set
> # CONFIG_MCI_DW is not set
> # CONFIG_MCI_ROCKCHIP_DWCMSHC is not set
> # CONFIG_MCI_BCM283X is not set
> # CONFIG_MCI_BCM283X_SDHOST is not set
> CONFIG_MCI_MMCI=y
> # CONFIG_MCI_ARASAN is not set
> +# CONFIG_MCI_AM654 is not set
> # CONFIG_MCI_SPI is not set
> CONFIG_HAVE_CLK=y
> CONFIG_CLKDEV_LOOKUP=y
> @@ -678,6 +699,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
> # CONFIG_MFD_TWL4030 is not set
> # CONFIG_MFD_TWL6030 is not set
> # CONFIG_MFD_STPMIC1 is not set
> +# CONFIG_MFD_PCA9450 is not set
> # CONFIG_MFD_RN568PMIC is not set
> # CONFIG_MFD_ATMEL_FLEXCOM is not set
> # CONFIG_MFD_RK808 is not set
> @@ -714,6 +736,7 @@ CONFIG_LED_TRIGGERS=y
> #
> # Input device support
> #
> +# CONFIG_INPUT_EVBUG is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_USB is not set
> @@ -725,8 +748,12 @@ CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_DW is not set
> # CONFIG_WATCHDOG_BCM2835 is not set
> # CONFIG_GPIO_WATCHDOG is not set
> +# CONFIG_CADENCE_WATCHDOG is not set
> # CONFIG_PWM is not set
> CONFIG_HWRNG=y
> +# CONFIG_HW_RANDOM_TIMERIOMEM is not set
> +# CONFIG_HW_RANDOM_BCM2835 is not set
> +# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
>
> #
> # DMA support
> @@ -785,8 +812,13 @@ CONFIG_REGULATOR_BCM283X=y
> # Firmware Drivers
> #
> # CONFIG_FIRMWARE_ALTERA_SERIAL is not set
> -# CONFIG_ARM_SCMI_PROTOCOL is not set
> # CONFIG_QEMU_FW_CFG is not set
> +
> +#
> +# ARM System Control and Management Interface Protocol
> +#
> +# CONFIG_ARM_SCMI_PROTOCOL is not set
> +# end of ARM System Control and Management Interface Protocol
> # end of Firmware Drivers
>
> #
> @@ -822,6 +854,16 @@ CONFIG_REGULATOR_BCM283X=y
> # end of KVX SoC drivers
> # end of SoC drivers
>
> +#
> +# PM Domains
> +#
> +
> +#
> +# i.MX PM Domains
> +#
> +# end of i.MX PM Domains
> +# end of PM Domains
> +
> #
> # NVME Support
> #
> @@ -832,6 +874,8 @@ CONFIG_REGULATOR_BCM283X=y
> # CONFIG_POWER_RESET_GPIO is not set
> # CONFIG_POWER_RESET_GPIO_RESTART is not set
> # CONFIG_VIRTIO_MENU is not set
> +# CONFIG_MAILBOX is not set
> +# CONFIG_TEE is not set
> # end of Drivers
>
> #
> @@ -901,6 +945,7 @@ CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> +CONFIG_XZ_DEC_ARM64=y
> # CONFIG_BASE64 is not set
> CONFIG_PROCESS_ESCAPE_SEQUENCE=y
> CONFIG_LZO_DECOMPRESS=y
> @@ -926,6 +971,17 @@ CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
> CONFIG_ARCH_HAS_ZERO_PAGE=y
> # end of Library routines
>
> +#
> +# Hardening options
> +#
> +# CONFIG_BUG_ON_DATA_CORRUPTION is not set
> +CONFIG_STACK_GUARD_PAGE=y
> +CONFIG_STACKPROTECTOR_NONE=y
> +# CONFIG_STACKPROTECTOR_STRONG is not set
> +CONFIG_PBL_STACKPROTECTOR_NONE=y
> +# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
> +# end of Hardening options
> +
> #
> # Crypto support
> #
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
> deleted file mode 100644
> index 1afe82806d60..000000000000
> --- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -From: Oleksij Rempel <o.rempel@pengutronix.de>
> -Date: Thu, 6 Jul 2023 09:04:40 +0200
> -Subject: [PATCH] ARM: at91: enable ddramc for sama5d3 and sama5d4
> -
> -ddramc has already support for sama5d3 and sama5d4, so enable it
> -officially.
> -
> -Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ----
> - arch/arm/mach-at91/Kconfig | 2 ++
> - 1 file changed, 2 insertions(+)
> -
> -diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> -index b803a1185d20..349586b68339 100644
> ---- a/arch/arm/mach-at91/Kconfig
> -+++ b/arch/arm/mach-at91/Kconfig
> -@@ -104,6 +104,7 @@ config SOC_SAMA5D3
> - select HAVE_AT91_UTMI
> - select PINCTRL_AT91
> - select HAS_MACB
> -+ select HAVE_AT91_DDRAMC
> -
> - config SOC_SAMA5D4
> - bool
> -@@ -116,6 +117,7 @@ config SOC_SAMA5D4
> - select HAVE_AT91_UTMI
> - select PINCTRL_AT91
> - select HAS_MACB
> -+ select HAVE_AT91_DDRAMC
> -
> - config SOC_SAM9X60
> - bool
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
> deleted file mode 100644
> index 7aeec243824b..000000000000
> --- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
> +++ /dev/null
> @@ -1,219 +0,0 @@
> -From: Oleksij Rempel <o.rempel@pengutronix.de>
> -Date: Tue, 4 Jul 2023 06:35:09 +0200
> -Subject: [PATCH] ARM: at91: add support for SAMA5D3 - Ethernet Development
> - System Board
> -
> -Microchip Technology SAMA5D3 Ethernet Development System (EDS) Board
> -(DM320114) is an MPU-based platform for evaluating Ethernet Switch and
> -PHY products. Compatible Ethernet Switch and PHY Evaluation Boards
> -connect to the SAMA5D3 EDS Board via either an RGMII or RMII connector.
> -The Microchip Technology SAMA5D3 EDS Board is not intended for
> -stand-alone use and has no Ethernet capabilities when no daughter board
> -or an USB Ethernet adapter is connected.
> -
> -For more information see:
> -https://www.microchip.com/en-us/development-tool/DM320114
> -
> -Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ----
> - Documentation/boards/at91.rst | 2 +
> - arch/arm/boards/Makefile | 1 +
> - arch/arm/boards/microchip-sama5d3-eds/Makefile | 3 ++
> - arch/arm/boards/microchip-sama5d3-eds/lowlevel.c | 62 ++++++++++++++++++++++++
> - arch/arm/configs/at91_multi_defconfig | 1 +
> - arch/arm/dts/Makefile | 1 +
> - arch/arm/dts/at91-microchip-sama5d3-eds.dts | 14 ++++++
> - arch/arm/mach-at91/Kconfig | 10 ++++
> - images/Makefile.at91 | 9 ++++
> - 9 files changed, 103 insertions(+)
> - create mode 100644 arch/arm/boards/microchip-sama5d3-eds/Makefile
> - create mode 100644 arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
> - create mode 100644 arch/arm/dts/at91-microchip-sama5d3-eds.dts
> -
> -diff --git a/Documentation/boards/at91.rst b/Documentation/boards/at91.rst
> -index f502979df6eb..961ef58d84ac 100644
> ---- a/Documentation/boards/at91.rst
> -+++ b/Documentation/boards/at91.rst
> -@@ -35,6 +35,8 @@ The resulting images will be placed under ``images/``:
> - barebox-at91sam9263ek.img
> - barebox-microchip-ksz9477-evb.img
> - barebox-microchip-ksz9477-evb-xload-mmc.img
> -+ barebox-microchip-sama5d3-eds.img
> -+ barebox-microchip-sama5d3-eds-xload-mmc.img
> - barebox-sama5d3-xplained.img
> - barebox-sama5d3-xplained-xload-mmc.img
> - barebox-sama5d27-som1-ek.img
> -diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> -index 2877debad535..382e649fce62 100644
> ---- a/arch/arm/boards/Makefile
> -+++ b/arch/arm/boards/Makefile
> -@@ -121,6 +121,7 @@ obj-$(CONFIG_MACH_SAMA5D27_SOM1) += sama5d27-som1/
> - obj-$(CONFIG_MACH_SAMA5D3XEK) += sama5d3xek/
> - obj-$(CONFIG_MACH_SAMA5D3_XPLAINED) += sama5d3_xplained/
> - obj-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += microchip-ksz9477-evb/
> -+obj-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += microchip-sama5d3-eds/
> - obj-$(CONFIG_MACH_SAMA5D4_XPLAINED) += sama5d4_xplained/
> - obj-$(CONFIG_MACH_SAMA5D4_WIFX) += sama5d4_wifx/
> - obj-$(CONFIG_MACH_SAMA5D4EK) += sama5d4ek/
> -diff --git a/arch/arm/boards/microchip-sama5d3-eds/Makefile b/arch/arm/boards/microchip-sama5d3-eds/Makefile
> -new file mode 100644
> -index 000000000000..458f5209008d
> ---- /dev/null
> -+++ b/arch/arm/boards/microchip-sama5d3-eds/Makefile
> -@@ -0,0 +1,3 @@
> -+# SPDX-License-Identifier: GPL-2.0-only
> -+
> -+lwl-y += lowlevel.o
> -diff --git a/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
> -new file mode 100644
> -index 000000000000..79346a9b6ac1
> ---- /dev/null
> -+++ b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
> -@@ -0,0 +1,62 @@
> -+// SPDX-License-Identifier: GPL-2.0-only AND BSD-1-Clause
> -+/*
> -+ * Copyright (C) 2014, Atmel Corporation
> -+ * Copyright (C) 2018 Ahmad Fatoum, Pengutronix
> -+ */
> -+
> -+#include <common.h>
> -+#include <init.h>
> -+
> -+#include <asm/barebox-arm-head.h>
> -+#include <debug_ll.h>
> -+#include <mach/at91/barebox-arm.h>
> -+#include <mach/at91/iomux.h>
> -+#include <mach/at91/sama5d3.h>
> -+#include <mach/at91/sama5d3-xplained-ddramc.h>
> -+#include <mach/at91/xload.h>
> -+
> -+/* PCK = 528MHz, MCK = 132MHz */
> -+#define MASTER_CLOCK 132000000
> -+
> -+static void dbgu_init(void)
> -+{
> -+ void __iomem *pio = IOMEM(SAMA5D3_BASE_PIOB);
> -+
> -+ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_PIOB);
> -+
> -+ at91_mux_pio3_pin(pio, pin_to_mask(AT91_PIN_PB31), AT91_MUX_PERIPH_A, 0);
> -+
> -+ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_DBGU);
> -+ at91_dbgu_setup_ll(IOMEM(AT91_BASE_DBGU1), MASTER_CLOCK, 115200);
> -+
> -+ putc_ll('>');
> -+}
> -+
> -+SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds_xload_mmc, r4)
> -+{
> -+ sama5d3_lowlevel_init();
> -+
> -+ relocate_to_current_adr();
> -+ setup_c();
> -+
> -+ sama5d3_udelay_init(MASTER_CLOCK);
> -+ sama5d3_xplained_ddrconf();
> -+ if (IS_ENABLED(CONFIG_DEBUG_LL))
> -+ dbgu_init();
> -+
> -+ sama5d3_atmci_start_image(0, MASTER_CLOCK, 0);
> -+}
> -+
> -+extern char __dtb_z_at91_microchip_sama5d3_eds_start[];
> -+
> -+SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds, r4)
> -+{
> -+ void *fdt;
> -+
> -+ if (IS_ENABLED(CONFIG_DEBUG_LL))
> -+ dbgu_init();
> -+
> -+ fdt = __dtb_z_at91_microchip_sama5d3_eds_start + get_runtime_offset();
> -+
> -+ sama5d3_barebox_entry(r4, fdt);
> -+}
> -diff --git a/arch/arm/configs/at91_multi_defconfig b/arch/arm/configs/at91_multi_defconfig
> -index c93c2f578609..de47af3bd0a6 100644
> ---- a/arch/arm/configs/at91_multi_defconfig
> -+++ b/arch/arm/configs/at91_multi_defconfig
> -@@ -4,6 +4,7 @@ CONFIG_MACH_SKOV_ARM9CPU=y
> - CONFIG_MACH_AT91SAM9263EK=y
> - CONFIG_MACH_AT91SAM9X5EK=y
> - CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
> -+CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
> - CONFIG_MACH_SAMA5D3_XPLAINED=y
> - CONFIG_MACH_SAMA5D27_SOM1=y
> - CONFIG_MACH_SAMA5D27_GIANTBOARD=y
> -diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> -index 98f4c4e0194b..eb9e0e062adf 100644
> ---- a/arch/arm/dts/Makefile
> -+++ b/arch/arm/dts/Makefile
> -@@ -193,6 +193,7 @@ lwl-$(CONFIG_MACH_AC_SXB) += ac-sxb.dtb.o
> - lwl-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
> - lwl-$(CONFIG_MACH_SAMA5D3_XPLAINED) += at91-sama5d3_xplained.dtb.o
> - lwl-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
> -+lwl-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += at91-microchip-sama5d3-eds.dtb.o
> - lwl-$(CONFIG_MACH_SAMA5D27_SOM1) += at91-sama5d27_som1_ek.dtb.o
> - lwl-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += at91-sama5d27_giantboard.dtb.o
> - lwl-$(CONFIG_MACH_SAMA5D4_WIFX) += at91-sama5d4_wifx_l1.dtb.o
> -diff --git a/arch/arm/dts/at91-microchip-sama5d3-eds.dts b/arch/arm/dts/at91-microchip-sama5d3-eds.dts
> -new file mode 100644
> -index 000000000000..ad75fc882c63
> ---- /dev/null
> -+++ b/arch/arm/dts/at91-microchip-sama5d3-eds.dts
> -@@ -0,0 +1,14 @@
> -+/* SPDX-License-Identifier: GPL-2.0 */
> -+/dts-v1/;
> -+#include <arm/at91-sama5d3_eds.dts>
> -+#include "sama5d3.dtsi"
> -+
> -+/ {
> -+ chosen {
> -+ environment {
> -+ compatible = "barebox,environment";
> -+ device-path = &mmc0, "partname:0";
> -+ file-path = "barebox.env";
> -+ };
> -+ };
> -+};
> -diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> -index 349586b68339..d2499747252d 100644
> ---- a/arch/arm/mach-at91/Kconfig
> -+++ b/arch/arm/mach-at91/Kconfig
> -@@ -606,6 +606,16 @@ config MACH_MICROCHIP_KSZ9477_EVB
> - help
> - Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit.
> -
> -+config MACH_MICROCHIP_SAMA5D3_EDS
> -+ bool "Microchip SAMA5D3 Ethernet Development System"
> -+ select SOC_SAMA5D3
> -+ select OFDEVICE
> -+ select MCI_ATMEL_PBL
> -+ select COMMON_CLK_OF_PROVIDER
> -+ help
> -+ Select this if you are using Microchip's SAMA5D3 Ethernet Development
> -+ System.
> -+
> - config MACH_SAMA5D3_XPLAINED
> - bool "Atmel SAMA5D3_XPLAINED Evaluation Kit"
> - select SOC_SAMA5D3
> -diff --git a/images/Makefile.at91 b/images/Makefile.at91
> -index 19a81e2e9a3c..36f725940639 100644
> ---- a/images/Makefile.at91
> -+++ b/images/Makefile.at91
> -@@ -20,6 +20,15 @@ MAX_PBL_IMAGE_SIZE_start_sama5d3_xplained_ung8071_xload_mmc = 0xffff
> - FILE_barebox-microchip-ksz9477-evb-xload-mmc.img = start_sama5d3_xplained_ung8071_xload_mmc.pblb
> - image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb-xload-mmc.img
> -
> -+pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds
> -+FILE_barebox-microchip-sama5d3-eds.img = start_microchip_sama5d3_eds.pblb
> -+image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds.img
> -+
> -+pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds_xload_mmc
> -+MAX_PBL_IMAGE_SIZE_start_microchip_sama5d3_eds_xload_mmc = 0xffff
> -+FILE_barebox-microchip-sama5d3-eds-xload-mmc.img = start_microchip_sama5d3_eds_xload_mmc.pblb
> -+image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds-xload-mmc.img
> -+
> - pblb-$(CONFIG_MACH_SAMA5D3_XPLAINED) += start_sama5d3_xplained
> - FILE_barebox-sama5d3-xplained.img = start_sama5d3_xplained.pblb
> - image-$(CONFIG_MACH_SAMA5D3_XPLAINED) += barebox-sama5d3-xplained.img
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
> deleted file mode 100644
> index 519ea4ace1a7..000000000000
> --- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -From: Oleksij Rempel <o.rempel@pengutronix.de>
> -Date: Thu, 6 Jul 2023 09:26:22 +0200
> -Subject: [PATCH] ARM: at91: microchip-ksz9477-evb: migrate to
> - sama5d3_barebox_entry()
> -
> -We have sama5d3_barebox_entry(), so make use of it.
> -
> -Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ----
> - arch/arm/boards/microchip-ksz9477-evb/lowlevel.c | 2 +-
> - 1 file changed, 1 insertion(+), 1 deletion(-)
> -
> -diff --git a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
> -index bda6a94160a5..aa2161daeef0 100644
> ---- a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
> -+++ b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
> -@@ -58,5 +58,5 @@ SAMA5D3_ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r4)
> -
> - fdt = __dtb_z_at91_microchip_ksz9477_evb_start + get_runtime_offset();
> -
> -- barebox_arm_entry(SAMA5_DDRCS, SZ_256M, fdt);
> -+ sama5d3_barebox_entry(r4, fdt);
> - }
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
> deleted file mode 100644
> index d6e6193a9fde..000000000000
> --- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -From: Oleksij Rempel <o.rempel@pengutronix.de>
> -Date: Thu, 6 Jul 2023 11:03:50 +0200
> -Subject: [PATCH] Release
> - 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
> -
> ----
> - Makefile | 2 +-
> - 1 file changed, 1 insertion(+), 1 deletion(-)
> -
> -diff --git a/Makefile b/Makefile
> -index 92b5c6779a52..323f757908bc 100644
> ---- a/Makefile
> -+++ b/Makefile
> -@@ -2,7 +2,7 @@
> - VERSION = 2023
> - PATCHLEVEL = 07
> - SUBLEVEL = 1
> --EXTRAVERSION =
> -+EXTRAVERSION =-20230706-1
> - NAME = None
> -
> - # *DOCUMENTATION*
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
> deleted file mode 100644
> index bdd8894835ae..000000000000
> --- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
> +++ /dev/null
> @@ -1,13 +0,0 @@
> -# umpf-base: v2023.07.1
> -# umpf-name: 2023.07.0/customers/pengutronix/distrokit-sama5d3
> -# umpf-version: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
> -# umpf-topic: v2023.07.0/topic/microchip-sama5d3-ether-dev-sys
> -# umpf-hashinfo: 8a1d1b8e7204ee57b743ae7f1325d5729104425e
> -# umpf-topic-range: 0186c17838e655dbf6a3bcd01fa74821d5e67ae6..b2883ce6100ca0f8259a1726bf53387e6da04a99
> -0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
> -0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
> -0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
> -# umpf-release: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
> -# umpf-topic-range: b2883ce6100ca0f8259a1726bf53387e6da04a99..eaaffd9164ab19a152d00c6d5f8f91cd07e5ec48
> -0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
> -# umpf-end
> diff --git a/configs/platform-v7a_noneon/platformconfig b/configs/platform-v7a_noneon/platformconfig
> index d600f7c84534..9aec8b079cc5 100644
> --- a/configs/platform-v7a_noneon/platformconfig
> +++ b/configs/platform-v7a_noneon/platformconfig
> @@ -179,8 +179,8 @@ PTXCONF_CONSOLE_SPEED="115200"
> # PTXCONF_AT91BOOTSTRAP2 is not set
> PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
> PTXCONF_BAREBOX_COMMON=y
> -PTXCONF_BAREBOX_COMMON_VERSION="2023.07.1"
> -PTXCONF_BAREBOX_COMMON_MD5="0b7ea966cd01266a93a4ccfa7d68bce0"
> +PTXCONF_BAREBOX_COMMON_VERSION="2024.07.0"
> +PTXCONF_BAREBOX_COMMON_MD5="c82948dfe7fba729e9d7eaaeff45f863"
> PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
> PTXCONF_BAREBOX_AT91=y
> PTXCONF_BAREBOX_VEXPRESS=y
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
prev parent reply other threads:[~2024-08-14 7:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-01 11:38 Ahmad Fatoum
2024-08-01 11:38 ` [DistroKit] [PATCH 2/6] v7a_noneon: barebox: don't activate all consoles by default Ahmad Fatoum
2024-08-01 11:38 ` [DistroKit] [PATCH 3/6] v7a_noneon: barebox: use ARM-optimized routines where appropriate Ahmad Fatoum
2024-08-01 11:38 ` [DistroKit] [PATCH 4/6] v7a_noneon: barebox: enable of_diff command Ahmad Fatoum
2024-08-01 11:38 ` [DistroKit] [PATCH 5/6] v7a_noneon: generate vexpress.norimg by default Ahmad Fatoum
2024-08-01 11:38 ` [DistroKit] [PATCH 6/6] v7a_noneon: run: really constrain the forwarded SSH port to <= 64000 Ahmad Fatoum
2024-08-08 13:01 ` Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 0/9] mips(el) cleanup Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 1/9] mipsel: sync kernelconfig Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 2/9] mips, mipsel: remove forked kernel rule Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 3/9] mips, mipsel: kernel-*: sync with template Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 4/9] mips, mipsel: kernel-*: use ptx/image-install and fix 'clean' stage Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 5/9] mips, mipsel: kernel-*: select KERNEL Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 6/9] mips, mipsel: migrate barebox-common recipe to barebox Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 7/9] mips, mipsel: barebox-*: sync with template Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 8/9] mips, mipsel: barebox-*: use ptx/image-install Roland Hieber
2024-08-13 13:20 ` [DistroKit] [PATCH v3 9/9] mips, mipsel: barebox-*: set LICENSE_FILES Roland Hieber
2024-08-14 7:55 ` [DistroKit] [PATCH v3 0/9] mips(el) cleanup Robert Schwebel
2024-08-14 7:59 ` Robert Schwebel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zrxj1oePEa7L6nhp@pengutronix.de \
--to=r.schwebel@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox