DistroKit Mailinglist
 help / color / mirror / Atom feed
From: Robert Schwebel <r.schwebel@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH] fixup! v7a: at91bootstrap: configure v4.0.6-rc1 for Wifx L1
Date: Tue, 18 Apr 2023 11:22:02 +0200	[thread overview]
Message-ID: <ZD5hOjZdxhhmJbs8@pengutronix.de> (raw)
In-Reply-To: <20230418091356.1809364-1-a.fatoum@pengutronix.de>

On Tue, Apr 18, 2023 at 11:13:56AM +0200, Ahmad Fatoum wrote:
> The at91bootstrap config was not completely clean after going from
> v4.0.5 to v4.0.6-rc1 in my private tree. Apply the defaults and keep
> CONFIG_PM disabled as it were before.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
>  configs/platform-v7a/at91bootstrap-wifx-l1.config | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)

squashed

> diff --git a/configs/platform-v7a/at91bootstrap-wifx-l1.config b/configs/platform-v7a/at91bootstrap-wifx-l1.config
> index 16a4426fe3ab..5a201e2d969f 100644
> --- a/configs/platform-v7a/at91bootstrap-wifx-l1.config
> +++ b/configs/platform-v7a/at91bootstrap-wifx-l1.config
> @@ -8,6 +8,7 @@ CONFIG_LOAD_AND_JUMP=y
>  CONFIG_LOAD_SW=y
>  CONFIG_JUMP_TO_SW=y
>  # CONFIG_SAM9X60 is not set
> +# CONFIG_SAM9X7 is not set
>  # CONFIG_SAMA5D2 is not set
>  # CONFIG_SAMA5D3X is not set
>  CONFIG_SAMA5D4=y
> @@ -61,6 +62,7 @@ CONFIG_ALLOW_CPU_CLK_600MHZ=y
>  # CONFIG_BUS_SPEED_170MHZ is not set
>  # CONFIG_BUS_SPEED_176MHZ is not set
>  CONFIG_BUS_SPEED_200MHZ=y
> +# CONFIG_BUS_SPEED_266MHZ is not set
>  CONFIG_SUPPORT_BUS_SPEED_148MHZ=y
>  CONFIG_SUPPORT_BUS_SPEED_170MHZ=y
>  CONFIG_SUPPORT_BUS_SPEED_176MHZ=y
> @@ -79,7 +81,7 @@ CONFIG_CPU_HAS_TRUSTZONE=y
>  # CONFIG_CPU_HAS_TZC400 is not set
>  CONFIG_CPU_V7=y
>  # CONFIG_HAS_PMIC_ACT8865 is not set
> -# CONFIG_SUPPORT_PM is not set
> +CONFIG_SUPPORT_PM=y
>  # CONFIG_HAS_ONE_WIRE is not set
>  # CONFIG_HAS_EEPROM is not set
>  CONFIG_HAS_EHT0_PHY=y
> @@ -246,6 +248,7 @@ CONFIG_MATRIX=y
>  # CONFIG_ENTER_NWD is not set
>  CONFIG_REDIRECT_ALL_INTS_AIC=y
>  # CONFIG_TZC400 is not set
> +# CONFIG_PM is not set
>  # CONFIG_BACKUP_MODE is not set
>  
>  #
> @@ -261,6 +264,7 @@ CONFIG_BOARD_QUIRK_NONE=y
>  # CONFIG_BOARD_QUIRK_SAM9X60_EB is not set
>  # CONFIG_BOARD_QUIRK_SAMA7G5_EK is not set
>  # CONFIG_BOARD_QUIRK_SAM9X60_CURIOSITY is not set
> +# CONFIG_BOARD_QUIRK_SAM9X75_EB is not set
>  # CONFIG_LED_ON_BOARD is not set
>  
>  #
> -- 
> 2.39.2
> 
> 
> 

-- 
Pengutronix e.K.                           | Dipl.-Ing. Robert Schwebel  |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |



      reply	other threads:[~2023-04-18  9:22 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-18  9:13 Ahmad Fatoum
2023-04-18  9:22 ` Robert Schwebel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZD5hOjZdxhhmJbs8@pengutronix.de \
    --to=r.schwebel@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=distrokit@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox