DistroKit Mailinglist
 help / color / mirror / Atom feed
* [DistroKit] [PATCH v2] v7a: barebox update 2020.09.0 -> 2021.02.0
@ 2021-03-12 13:47 Uwe Kleine-König
  2021-03-12 14:03 ` Ahmad Fatoum
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Uwe Kleine-König @ 2021-03-12 13:47 UTC (permalink / raw)
  To: distrokit; +Cc: Ahmad Fatoum

One new patch is required to fix a regression for USB on rpi3. Also USB
on rpi3 requires CONFIG_USB_NOP_XCEIV=y now which is enabled in the rpi2
config now.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Hello Robert,

Ahmad tested my update on beaglebone and pointed out to more patches to
add to the barebox patchstack. All three patches in this series were
already sent to the barebox list. Can you please replace the commit that
is currently 619f18c57d1aa1eac308f84137d1d2a8d98c53cf in next by this
one?

Best regards and thanks
Uwe

 .../platform-v7a/barebox-am335x-mlo.config    | 17 ++++----
 configs/platform-v7a/barebox-am335x.config    | 24 +++++------
 .../platform-v7a/barebox-am335x.config.diff   | 16 ++------
 configs/platform-v7a/barebox-at91.config      | 13 +++++-
 configs/platform-v7a/barebox-at91.config.diff |  4 +-
 configs/platform-v7a/barebox-mx6.config       | 29 ++++++++------
 configs/platform-v7a/barebox-mx6.config.diff  | 20 ++++------
 configs/platform-v7a/barebox-rpi2.config      | 16 +++++++-
 configs/platform-v7a/barebox-rpi2.config.diff |  5 ++-
 configs/platform-v7a/barebox-stm32mp.config   | 15 ++++++-
 .../platform-v7a/barebox-stm32mp.config.diff  |  6 +--
 configs/platform-v7a/barebox-vexpress.config  | 12 +++++-
 .../platform-v7a/barebox-vexpress.config.diff |  4 +-
 configs/platform-v7a/barebox.config           | 12 +++++-
 configs/platform-v7a/kernelconfig             | 10 +++++
 .../bcm283X-Select-OF-clock-providers.patch   | 30 ++++++++++++++
 .../net-phy-fix-waiting-for-link.patch        | 35 ++++++++++++++++
 ...probe-simple-pm-bus-children-as-well.patch | 40 +++++++++++++++++++
 .../patches/barebox-2021.02.0/series          |  6 +++
 configs/platform-v7a/platformconfig           |  4 +-
 .../platform-v7a/rules/barebox-stm32mp.make   |  2 +-
 .../rules/image-stm32mp157c-dk2.make          |  2 +-
 configs/platform-v7a/run                      |  2 +-
 23 files changed, 245 insertions(+), 79 deletions(-)
 create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
 create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
 create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
 create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/series

diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index 022d53c045e4..618d8e77bb3a 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_USE_COMPRESSED_DTB=y
@@ -187,6 +187,9 @@ CONFIG_DEBUG_OMAP_UART_PORT=1
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
 # end of Debugging
 
@@ -248,18 +251,11 @@ CONFIG_MTD_M25P80=y
 
 # CONFIG_DRIVER_CFI is not set
 CONFIG_NAND=y
-# CONFIG_NAND_ECC_SOFT is not set
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
+# CONFIG_MTD_NAND_ECC_SOFT is not set
 # CONFIG_NAND_ECC_HW_SYNDROME is not set
-# CONFIG_NAND_ECC_HW_NONE is not set
-# CONFIG_NAND_INFO is not set
-# CONFIG_NAND_BBT is not set
 CONFIG_NAND_OMAP_GPMC=y
 # CONFIG_MTD_NAND_OMAP_ELM is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
 # CONFIG_MTD_NAND_DENALI is not set
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -290,6 +286,7 @@ CONFIG_MCI=y
 # CONFIG_MCI_STARTUP is not set
 # CONFIG_MCI_WRITE is not set
 # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
 
 #
 # --- MCI host drivers ---
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index a43071027572..d959c499b75a 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -213,6 +213,7 @@ CONFIG_STATE=y
 # CONFIG_BOOTCHOOSER is not set
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
 
 #
 # OP-TEE loading
@@ -238,6 +239,9 @@ CONFIG_DEBUG_OMAP_UART_PORT=1
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
 # end of Debugging
 
@@ -267,6 +271,7 @@ CONFIG_CMD_VERSION=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
 # end of Information
 
 #
@@ -305,6 +310,7 @@ CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
 # end of Environment
 
 #
@@ -384,6 +390,7 @@ CONFIG_CMD_MEMCMP=y
 CONFIG_CMD_MEMCPY=y
 CONFIG_CMD_MEMSET=y
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
 CONFIG_CMD_MM=y
 CONFIG_CMD_MW=y
 # end of Memory
@@ -397,7 +404,6 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 CONFIG_CMD_NAND=y
-# CONFIG_CMD_NANDTEST is not set
 # CONFIG_CMD_NAND_BITFLIP is not set
 # CONFIG_CMD_POWEROFF is not set
 CONFIG_CMD_SPI=y
@@ -439,6 +445,7 @@ CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
 
 #
 # Drivers
@@ -558,20 +565,12 @@ CONFIG_MTD_M25P80=y
 
 # CONFIG_DRIVER_CFI is not set
 CONFIG_NAND=y
-CONFIG_NAND_ECC_SOFT=y
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
+# CONFIG_MTD_NAND_ECC_SOFT is not set
 CONFIG_NAND_ECC_HW_SYNDROME=y
-CONFIG_NAND_ECC_HW_NONE=y
-CONFIG_NAND_INFO=y
-CONFIG_NAND_READ_OOB=y
-CONFIG_NAND_BBT=y
 # CONFIG_NAND_ALLOW_ERASE_BAD is not set
 CONFIG_NAND_OMAP_GPMC=y
 # CONFIG_MTD_NAND_OMAP_ELM is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
 # CONFIG_MTD_NAND_DENALI is not set
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -629,6 +628,7 @@ CONFIG_MCI_STARTUP=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
 
 #
 # --- MCI host drivers ---
diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
index e944803f8d0b..75d489722ecf 100644
--- a/configs/platform-v7a/barebox-am335x.config.diff
+++ b/configs/platform-v7a/barebox-am335x.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
 # CONFIG_AM33XX_NET_BOOT is not set
 CONFIG_ARCH_AM33XX=y
 # CONFIG_ARCH_BCM283X is not set
@@ -22,10 +22,10 @@ CONFIG_CLOCKSOURCE_TI_DM=y
 # CONFIG_CMD_KEYSTORE is not set
 CONFIG_CMD_MIITOOL=y
 CONFIG_CMD_NAND=y
-# CONFIG_CMD_NANDTEST is not set
 # CONFIG_CMD_NAND_BITFLIP is not set
 # CONFIG_CMD_SMC is undefined
 # CONFIG_COMMON_CLK is undefined
+# CONFIG_COMMON_CLK_OF_PROVIDER is undefined
 # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
 CONFIG_CONSOLE_ACTIVATE_NONE=y
 CONFIG_CRYPTO_KEYSTORE=y
@@ -69,24 +69,16 @@ CONFIG_MACH_BEAGLEBONE=y
 CONFIG_MCI_OMAP_HSMMC=y
 CONFIG_MTD_M25P80=y
 # CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
 # CONFIG_MTD_NAND_OMAP_ELM is not set
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
 # CONFIG_MTD_SST25L is not set
 CONFIG_NAND=y
 # CONFIG_NAND_ALLOW_ERASE_BAD is not set
-CONFIG_NAND_BBT=y
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-CONFIG_NAND_ECC_HW_NONE=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
 CONFIG_NAND_ECC_HW_SYNDROME=y
-CONFIG_NAND_ECC_SOFT=y
-CONFIG_NAND_INFO=y
 CONFIG_NAND_OMAP_GPMC=y
-CONFIG_NAND_READ_OOB=y
 CONFIG_NVMEM=y
 # CONFIG_NVMEM_SNVS_LPGPR is not set
 # CONFIG_OMAP_BUILD_IFT is not set
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
index 48d48fe086f4..127b79f21e47 100644
--- a/configs/platform-v7a/barebox-at91.config
+++ b/configs/platform-v7a/barebox-at91.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -214,6 +214,7 @@ CONFIG_STATE=y
 # CONFIG_BOOTCHOOSER is not set
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
 
 #
 # OP-TEE loading
@@ -233,6 +234,9 @@ CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
 # end of Debugging
 
@@ -263,6 +267,7 @@ CONFIG_CMD_VERSION=y
 # CONFIG_CMD_MMC is not set
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
 # end of Information
 
 #
@@ -302,6 +307,7 @@ CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
 # end of Environment
 
 #
@@ -381,6 +387,7 @@ CONFIG_CMD_MEMCMP=y
 CONFIG_CMD_MEMCPY=y
 CONFIG_CMD_MEMSET=y
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
 CONFIG_CMD_MM=y
 CONFIG_CMD_MW=y
 # end of Memory
@@ -431,6 +438,7 @@ CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
 
 #
 # Drivers
@@ -577,6 +585,7 @@ CONFIG_MCI=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
 
 #
 # --- MCI host drivers ---
@@ -730,6 +739,8 @@ CONFIG_REGULATOR_FIXED=y
 # NVME Support
 #
 # end of NVME Support
+
+# CONFIG_SYSCON_REBOOT_MODE is not set
 # end of Drivers
 
 #
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
index 3f636d86a633..3fa0142d83bd 100644
--- a/configs/platform-v7a/barebox-at91.config.diff
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
 CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_BCM283X is not set
 CONFIG_ARCH_TEXT_BASE=0x23f00000
@@ -21,7 +21,6 @@ CONFIG_CMD_MENU_MANAGEMENT=y
 # CONFIG_CMD_USB is undefined
 # CONFIG_CMD_USBGADGET is undefined
 CONFIG_COMMON_CLK_AT91=y
-CONFIG_COMMON_CLK_OF_PROVIDER=y
 CONFIG_COMPILE_LOGLEVEL=6
 CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
 CONFIG_DEFAULT_COMPRESSION_BZIP2=y
@@ -99,6 +98,7 @@ CONFIG_SOC_SAMA5D2=y
 CONFIG_SPI_ATMEL_QUADSPI=y
 # CONFIG_SPI_CADENCE_QUADSPI is not set
 CONFIG_SPI_MEM=y
+# CONFIG_SYSCON_REBOOT_MODE is not set
 # CONFIG_THUMB2_BAREBOX is undefined
 # CONFIG_USB is undefined
 # CONFIG_USBGADGET_START is undefined
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index 13400907e6d0..8af1a2a0fdf0 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -118,6 +118,8 @@ CONFIG_MACH_UDOO_NEO=y
 # CONFIG_MACH_PHYTEC_SOM_IMX8MQ is not set
 # CONFIG_MACH_GRINN_LITEBOARD is not set
 # CONFIG_MACH_DIGI_CCIMX6ULSBCPRO is not set
+# CONFIG_MACH_WEBASTO_CCBV2 is not set
+# CONFIG_MACH_MNT_REFORM is not set
 
 #
 # Board specific settings
@@ -279,6 +281,7 @@ CONFIG_STATE=y
 # CONFIG_BOOTCHOOSER is not set
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
 
 #
 # OP-TEE loading
@@ -304,6 +307,9 @@ CONFIG_DEBUG_IMX_UART_PORT=1
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
 # end of Debugging
 
@@ -333,6 +339,7 @@ CONFIG_CMD_VERSION=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_MMC_EXTCSD=y
 # CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
 # end of Information
 
 #
@@ -373,6 +380,7 @@ CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
 # end of Environment
 
 #
@@ -454,6 +462,7 @@ CONFIG_CMD_MEMCMP=y
 CONFIG_CMD_MEMCPY=y
 CONFIG_CMD_MEMSET=y
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
 CONFIG_CMD_MM=y
 CONFIG_CMD_MW=y
 # end of Memory
@@ -468,7 +477,6 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 CONFIG_CMD_NAND=y
-CONFIG_CMD_NANDTEST=y
 # CONFIG_CMD_NAND_BITFLIP is not set
 # CONFIG_CMD_POWEROFF is not set
 CONFIG_CMD_SPI=y
@@ -510,6 +518,7 @@ CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
 
 #
 # Drivers
@@ -634,20 +643,12 @@ CONFIG_MTD_SST25L=y
 
 # CONFIG_DRIVER_CFI is not set
 CONFIG_NAND=y
-CONFIG_NAND_ECC_SOFT=y
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
+# CONFIG_MTD_NAND_ECC_SOFT is not set
 CONFIG_NAND_ECC_HW_SYNDROME=y
-CONFIG_NAND_ECC_HW_NONE=y
-CONFIG_NAND_INFO=y
-CONFIG_NAND_READ_OOB=y
-CONFIG_NAND_BBT=y
 CONFIG_NAND_ALLOW_ERASE_BAD=y
 CONFIG_NAND_IMX=y
 CONFIG_NAND_MXS=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
 # CONFIG_MTD_NAND_DENALI is not set
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -714,6 +715,7 @@ CONFIG_VIDEO_VPL=y
 CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
 CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
 # CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL is not set
+# CONFIG_DRIVER_VIDEO_BOCHS_ISA is not set
 CONFIG_DRIVER_VIDEO_SIMPLEFB=y
 # CONFIG_DRIVER_VIDEO_EDID is not set
 # CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
@@ -733,6 +735,7 @@ CONFIG_MCI=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
 
 #
 # --- MCI host drivers ---
@@ -913,6 +916,8 @@ CONFIG_USB_NOP_XCEIV=y
 # NVME Support
 #
 # end of NVME Support
+
+# CONFIG_SYSCON_REBOOT_MODE is not set
 # end of Drivers
 
 #
diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
index 3c04319ba252..58450f94a7c0 100644
--- a/configs/platform-v7a/barebox-mx6.config.diff
+++ b/configs/platform-v7a/barebox-mx6.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
 # CONFIG_ARCH_BCM283X is not set
 CONFIG_ARCH_HAS_FEC_IMX=y
 CONFIG_ARCH_HAS_IMX_GPT=y
@@ -26,13 +26,11 @@ CONFIG_CLOCKSOURCE_IMX_GPT=y
 CONFIG_CMD_MIITOOL=y
 CONFIG_CMD_MMC_EXTCSD=y
 CONFIG_CMD_NAND=y
-CONFIG_CMD_NANDTEST=y
 # CONFIG_CMD_NAND_BITFLIP is not set
 # CONFIG_CMD_SMC is undefined
 CONFIG_CMD_SPLASH=y
 CONFIG_CMD_UBI=y
 CONFIG_CMD_UBIFORMAT=y
-CONFIG_COMMON_CLK_OF_PROVIDER=y
 # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
 CONFIG_CONSOLE_ACTIVATE_NONE=y
 CONFIG_CRYPTO_KEYSTORE=y
@@ -52,6 +50,7 @@ CONFIG_DRIVER_SERIAL_IMX=y
 CONFIG_DRIVER_SPI_IMX=y
 CONFIG_DRIVER_SPI_IMX_2_3=y
 # CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
+# CONFIG_DRIVER_VIDEO_BOCHS_ISA is not set
 # CONFIG_DRIVER_VIDEO_EDID is not set
 # CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set
 CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
@@ -115,6 +114,7 @@ CONFIG_MACH_EMBEST_RIOTBOARD=y
 # CONFIG_MACH_GW_VENTANA is not set
 # CONFIG_MACH_KINDLE_MX50 is not set
 # CONFIG_MACH_KONTRON_SAMX6I is not set
+# CONFIG_MACH_MNT_REFORM is not set
 CONFIG_MACH_NITROGEN6=y
 # CONFIG_MACH_NXP_IMX6ULL_EVK is not set
 # CONFIG_MACH_NXP_IMX8MM_EVK is not set
@@ -148,6 +148,7 @@ CONFIG_MACH_UDOO_NEO=y
 # CONFIG_MACH_VARISCITE_MX6 is not set
 # CONFIG_MACH_VF610_TWR is not set
 # CONFIG_MACH_WARP7 is not set
+# CONFIG_MACH_WEBASTO_CCBV2 is not set
 # CONFIG_MACH_ZII_IMX7D_DEV is not set
 # CONFIG_MACH_ZII_IMX8MQ_DEV is not set
 # CONFIG_MACH_ZII_RDU1 is not set
@@ -167,8 +168,8 @@ CONFIG_MTD_DATAFLASH=y
 # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
 CONFIG_MTD_M25P80=y
 # CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
 CONFIG_MTD_RAW_DEVICE=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -181,17 +182,9 @@ CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MXS_APBH_DMA=y
 CONFIG_NAND=y
 CONFIG_NAND_ALLOW_ERASE_BAD=y
-CONFIG_NAND_BBT=y
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-CONFIG_NAND_ECC_HW_NONE=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
 CONFIG_NAND_ECC_HW_SYNDROME=y
-CONFIG_NAND_ECC_SOFT=y
 CONFIG_NAND_IMX=y
-CONFIG_NAND_INFO=y
 CONFIG_NAND_MXS=y
-CONFIG_NAND_READ_OOB=y
 CONFIG_NVMEM=y
 # CONFIG_NVMEM_SNVS_LPGPR is not set
 CONFIG_PARTITION_DISK_EFI=y
@@ -217,6 +210,7 @@ CONFIG_RESET_IMX_SRC=y
 # CONFIG_SPI_CADENCE_QUADSPI is not set
 CONFIG_SPI_MEM=y
 CONFIG_STMP_DEVICE=y
+# CONFIG_SYSCON_REBOOT_MODE is not set
 CONFIG_THUMB2_BAREBOX=y
 CONFIG_UBIFORMAT=y
 CONFIG_USB_GADGET_DFU=y
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 9e73e9ee877a..4535c2963577 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -202,6 +202,7 @@ CONFIG_STATE=y
 # CONFIG_BOOTCHOOSER is not set
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
 
 #
 # OP-TEE loading
@@ -219,6 +220,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
 # end of Debugging
 
@@ -248,6 +252,7 @@ CONFIG_CMD_VERSION=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
 # end of Information
 
 #
@@ -286,6 +291,7 @@ CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
 # end of Environment
 
 #
@@ -365,6 +371,7 @@ CONFIG_CMD_MEMCMP=y
 CONFIG_CMD_MEMCPY=y
 CONFIG_CMD_MEMSET=y
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
 CONFIG_CMD_MM=y
 CONFIG_CMD_MW=y
 # end of Memory
@@ -416,6 +423,7 @@ CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
 
 #
 # Drivers
@@ -562,6 +570,7 @@ CONFIG_MCI=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
 
 #
 # --- MCI host drivers ---
@@ -575,6 +584,7 @@ CONFIG_MCI_BCM283X_SDHOST=y
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_OF_PROVIDER=y
 
 #
 # Clocksource
@@ -686,7 +696,9 @@ CONFIG_REGULATOR_BCM283X=y
 # CONFIG_FIRMWARE_ALTERA_SERIAL is not set
 # end of Firmware Drivers
 
-# CONFIG_GENERIC_PHY is not set
+CONFIG_GENERIC_PHY=y
+CONFIG_USB_NOP_XCEIV=y
+# CONFIG_PHY_FSL_IMX8MQ_USB is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
index 4ca4bd22ca09..98f09156371d 100644
--- a/configs/platform-v7a/barebox-rpi2.config.diff
+++ b/configs/platform-v7a/barebox-rpi2.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
 CONFIG_ARM_ASM_UNIFIED=y
 CONFIG_BOOTM_INITRD=y
 # CONFIG_CMD_I2C is undefined
@@ -8,6 +8,7 @@ CONFIG_DRIVER_SERIAL_NS16550=y
 # CONFIG_EEPROM_93XX46 is not set
 # CONFIG_EEPROM_AT24 is undefined
 # CONFIG_FILE_LIST is undefined
+CONFIG_GENERIC_PHY=y
 # CONFIG_GPIO_PCA953X is undefined
 # CONFIG_GPIO_PCF857X is undefined
 CONFIG_GPIO_RASPBERRYPI_EXP=y
@@ -43,6 +44,7 @@ CONFIG_NET_NETCONSOLE=y
 CONFIG_NVMEM=y
 # CONFIG_NVMEM_SNVS_LPGPR is not set
 # CONFIG_PBL_OPTEE is undefined
+# CONFIG_PHY_FSL_IMX8MQ_USB is not set
 CONFIG_PINCTRL_BCM283X=y
 CONFIG_PROMPT="R-Pi> "
 CONFIG_SERIAL_AMBA_PL011=y
@@ -58,5 +60,6 @@ CONFIG_USB_DWC2_HOST=y
 # CONFIG_USB_GADGET_FASTBOOT is undefined
 # CONFIG_USB_GADGET_SERIAL is undefined
 # CONFIG_USB_HUB_USB251XB is undefined
+CONFIG_USB_NOP_XCEIV=y
 CONFIG_USB_OTGDEV=y
 CONFIG_WATCHDOG_BCM2835=y
diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config
index 10df8b08857a..b64fedbd221e 100644
--- a/configs/platform-v7a/barebox-stm32mp.config
+++ b/configs/platform-v7a/barebox-stm32mp.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -52,7 +52,7 @@ CONFIG_CPU_32v7=y
 CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
 CONFIG_ARCH_NR_GPIO=416
 CONFIG_ARCH_STM32MP157=y
-CONFIG_MACH_STM32MP157C_DK2=y
+CONFIG_MACH_STM32MP15XX_DKX=y
 CONFIG_MACH_LXA_MC1=y
 # CONFIG_MACH_SEEED_ODYSSEY is not set
 # CONFIG_BOARD_ARM_GENERIC_DT is not set
@@ -198,6 +198,7 @@ CONFIG_STATE=y
 # CONFIG_BOOTCHOOSER is not set
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
 
 #
 # OP-TEE loading
@@ -215,6 +216,9 @@ CONFIG_DEFAULT_LOGLEVEL=7
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
 # end of Debugging
 
@@ -244,6 +248,7 @@ CONFIG_CMD_VERSION=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_MMC_EXTCSD=y
 # CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
 # end of Information
 
 #
@@ -282,6 +287,7 @@ CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
 # end of Environment
 
 #
@@ -361,6 +367,7 @@ CONFIG_CMD_MEMCMP=y
 CONFIG_CMD_MEMCPY=y
 CONFIG_CMD_MEMSET=y
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
 CONFIG_CMD_MM=y
 CONFIG_CMD_MW=y
 # end of Memory
@@ -410,6 +417,7 @@ CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
 
 #
 # Drivers
@@ -524,6 +532,7 @@ CONFIG_MCI_STARTUP=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
 
 #
 # --- MCI host drivers ---
@@ -684,6 +693,8 @@ CONFIG_RESET_STM32=y
 # NVME Support
 #
 # end of NVME Support
+
+# CONFIG_SYSCON_REBOOT_MODE is not set
 # end of Drivers
 
 #
diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
index 4b1564f9cb7a..3212fc145b9c 100644
--- a/configs/platform-v7a/barebox-stm32mp.config.diff
+++ b/configs/platform-v7a/barebox-stm32mp.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
 # CONFIG_ARCH_BCM283X is not set
 CONFIG_ARCH_HAS_RESET_CONTROLLER=y
 CONFIG_ARCH_NR_GPIO=416
@@ -30,7 +30,6 @@ CONFIG_CMD_POWEROFF=y
 # CONFIG_CMD_SPI is undefined
 # CONFIG_CMD_USB is undefined
 # CONFIG_CMD_USBGADGET is undefined
-CONFIG_COMMON_CLK_OF_PROVIDER=y
 CONFIG_COMPILE_LOGLEVEL=6
 # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
 CONFIG_CONSOLE_ACTIVATE_NONE=y
@@ -69,7 +68,7 @@ CONFIG_MACH_LXA_MC1=y
 # CONFIG_MACH_RPI_CM3 is undefined
 # CONFIG_MACH_RPI_COMMON is undefined
 # CONFIG_MACH_SEEED_ODYSSEY is not set
-CONFIG_MACH_STM32MP157C_DK2=y
+CONFIG_MACH_STM32MP15XX_DKX=y
 # CONFIG_MCI_BCM283X is undefined
 # CONFIG_MCI_BCM283X_SDHOST is undefined
 # CONFIG_MCI_MMCI is not set
@@ -126,6 +125,7 @@ CONFIG_STM32_BSEC=y
 CONFIG_STM32_IWDG_WATCHDOG=y
 CONFIG_STM32_REMOTEPROC=y
 # CONFIG_STPMIC1_WATCHDOG is not set
+# CONFIG_SYSCON_REBOOT_MODE is not set
 CONFIG_THUMB2_BAREBOX=y
 # CONFIG_USB is undefined
 # CONFIG_USBGADGET_START is undefined
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index d50789871a8c..1765134bac45 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -51,6 +51,7 @@ CONFIG_CPU_32v7=y
 CONFIG_ARCH_TEXT_BASE=0x0
 CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
 CONFIG_MACH_VEXPRESS=y
+# CONFIG_MACH_VIRT is not set
 CONFIG_BOARD_ARM_GENERIC_DT=y
 CONFIG_AEABI=y
 # CONFIG_THUMB2_BAREBOX is not set
@@ -190,6 +191,7 @@ CONFIG_STATE=y
 # CONFIG_BOOTCHOOSER is not set
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
 
 #
 # OP-TEE loading
@@ -208,6 +210,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
 # end of Debugging
 
@@ -237,6 +242,7 @@ CONFIG_CMD_VERSION=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
 # end of Information
 
 #
@@ -275,6 +281,7 @@ CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
 # end of Environment
 
 #
@@ -354,6 +361,7 @@ CONFIG_CMD_MEMCMP=y
 CONFIG_CMD_MEMCPY=y
 CONFIG_CMD_MEMSET=y
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
 CONFIG_CMD_MM=y
 CONFIG_CMD_MW=y
 # end of Memory
@@ -405,6 +413,7 @@ CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
 
 #
 # Drivers
@@ -571,6 +580,7 @@ CONFIG_MCI_STARTUP=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
 
 #
 # --- MCI host drivers ---
diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
index ac5b99af308f..211256bd7d71 100644
--- a/configs/platform-v7a/barebox-vexpress.config.diff
+++ b/configs/platform-v7a/barebox-vexpress.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
 CONFIG_AMBA_SP804=y
 # CONFIG_ARCH_BCM283X is not set
 CONFIG_ARCH_VEXPRESS=y
@@ -9,7 +9,6 @@ CONFIG_BOOTM_INITRD=y
 # CONFIG_CLOCKSOURCE_BCM283X is undefined
 # CONFIG_CMD_GPIO is undefined
 # CONFIG_CMD_SMC is undefined
-CONFIG_COMMON_CLK_OF_PROVIDER=y
 CONFIG_CONSOLE_ACTIVATE_ALL=y
 # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
 CONFIG_DRIVER_CFI=y
@@ -47,6 +46,7 @@ CONFIG_DRIVER_NET_SMC911X=y
 # CONFIG_MACH_RPI_CM3 is undefined
 # CONFIG_MACH_RPI_COMMON is undefined
 CONFIG_MACH_VEXPRESS=y
+# CONFIG_MACH_VIRT is not set
 # CONFIG_MCI_BCM283X is undefined
 # CONFIG_MCI_BCM283X_SDHOST is undefined
 # CONFIG_MDIO_BUS_MUX_GPIO is undefined
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index bbe7f3e51986..fd9da0519224 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARM_LINUX=y
@@ -203,6 +203,7 @@ CONFIG_STATE=y
 # CONFIG_BOOTCHOOSER is not set
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
 
 #
 # OP-TEE loading
@@ -221,6 +222,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_PBL_BREAK is not set
 # CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
 # end of Debugging
 
@@ -250,6 +254,7 @@ CONFIG_CMD_VERSION=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
 # end of Information
 
 #
@@ -288,6 +293,7 @@ CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
 # end of Environment
 
 #
@@ -367,6 +373,7 @@ CONFIG_CMD_MEMCMP=y
 CONFIG_CMD_MEMCPY=y
 CONFIG_CMD_MEMSET=y
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
 CONFIG_CMD_MM=y
 CONFIG_CMD_MW=y
 # end of Memory
@@ -420,6 +427,7 @@ CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
 
 #
 # Drivers
@@ -584,6 +592,7 @@ CONFIG_MCI_STARTUP=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
 
 #
 # --- MCI host drivers ---
@@ -597,6 +606,7 @@ CONFIG_MCI_MMCI=y
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_OF_PROVIDER=y
 
 #
 # Clocksource
diff --git a/configs/platform-v7a/kernelconfig b/configs/platform-v7a/kernelconfig
index b32a368a0a19..968a6c9b8253 100644
--- a/configs/platform-v7a/kernelconfig
+++ b/configs/platform-v7a/kernelconfig
@@ -555,6 +555,7 @@ CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_PARAVIRT is not set
 # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
 # CONFIG_XEN is not set
+CONFIG_STACKPROTECTOR_PER_TASK=y
 # end of Kernel Features
 
 #
@@ -769,6 +770,11 @@ CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
 # end of GCOV-based kernel profiling
 
 CONFIG_HAVE_GCC_PLUGINS=y
+CONFIG_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
+# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
+# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
+CONFIG_GCC_PLUGIN_ARM_SSP_PER_TASK=y
 # end of General architecture-dependent options
 
 CONFIG_RT_MUTEXES=y
@@ -3455,6 +3461,9 @@ CONFIG_LSM="yama,loadpin,safesetid,integrity"
 # Memory initialization
 #
 CONFIG_INIT_STACK_NONE=y
+# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
+# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
+# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
 # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
 # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
 # end of Memory initialization
@@ -3763,6 +3772,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_INFO_SPLIT is not set
 # CONFIG_DEBUG_INFO_DWARF4 is not set
 # CONFIG_DEBUG_INFO_BTF is not set
+CONFIG_PAHOLE_HAS_SPLIT_BTF=y
 # CONFIG_GDB_SCRIPTS is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_STRIP_ASM_SYMS is not set
diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch b/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
new file mode 100644
index 000000000000..8b08428d8c51
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
@@ -0,0 +1,30 @@
+From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
+Date: Thu, 11 Mar 2021 13:10:47 +0100
+Subject: [PATCH] bcm283X: Select OF clock providers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This makes available the fixed clock needed on rpi3 for USB.
+
+USB stopped working when the dwc driver started to require an otg clock.
+
+Fixes: f73ca701bb85 ("usb: dwc2: add clk dependency for probe via oftree")
+Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Link: https://lore.pengutronix.de/20210312133030.521569-1-u.kleine-koenig@pengutronix.de
+---
+ arch/arm/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index ab0bf030131c..f9be9d42ecff 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -44,6 +44,7 @@ config ARCH_BCM283X
+ 	select GPIOLIB
+ 	select CLKDEV_LOOKUP
+ 	select COMMON_CLK
++	select COMMON_CLK_OF_PROVIDER
+ 	select CLOCKSOURCE_BCM283X
+ 	select ARM_AMBA
+ 	select HAS_DEBUG_LL
diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch b/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
new file mode 100644
index 000000000000..cf4279860c6e
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
@@ -0,0 +1,35 @@
+From: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Fri, 12 Mar 2021 11:13:09 +0100
+Subject: [PATCH] net: phy: fix waiting for link
+
+phydev->adjust_link() is called only from phy_update_status() when the
+link status changes during that function. phydev->link is also updated
+in genphy_update_link() called from phy_wait_aneg_done(), so it can
+happen that phydev->link changes outside of phy_update_status(), thus
+phydev->adjust_link is never called and no link change notice is
+printed.
+
+Instead of calling genphy_update_link() from phy_wait_aneg_done(), call
+phy_update_status(). This makes sure that a link change is properly
+noticed.
+
+Fixes: 8f75aa496dcb ("net: reply to ping requests")
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+Link: https://lore.pengutronix.de/20210312101309.29650-1-s.hauer@pengutronix.de
+---
+ drivers/net/phy/phy.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index 622acbe40dd9..e8e8dad5bd25 100644
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -571,7 +571,7 @@ int phy_wait_aneg_done(struct phy_device *phydev)
+ 	}
+ 
+ 	do {
+-		genphy_update_link(phydev);
++		phy_update_status(phydev);
+ 		if (phydev->link == 1)
+ 			return 0;
+ 	} while (!is_timeout(start, PHY_AN_TIMEOUT * SECOND));
diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch b/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
new file mode 100644
index 000000000000..787366640b99
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
@@ -0,0 +1,40 @@
+From: Ahmad Fatoum <a.fatoum@pengutronix.de>
+Date: Fri, 12 Mar 2021 08:27:46 +0100
+Subject: [PATCH] of: base: probe simple-pm-bus children as well
+
+Upstream is migrating device trees like those of the am33xx to use
+simple-pm-bus, where applicable. These are buses that reference a clock
+or a power domain that needs to be enabled in order to use devices on it.
+
+As we didn't yet support this binding, this broke the Beaglebone
+and all other am33xx board since v2021.02.0.
+
+Fix this by adding simple-pm-bus to the of_default_bus_match_table.
+Note that this is only an adequate solution for when the power domain
+and clocks referenced are already enabled prior to barebox startup.
+
+For all other cases, driver support must be available for the clock
+and power domains in questions and this driver must be extended to
+make use of them. For the am33xx, the relevant buses are powered
+and clocked on boot up, so we leave general support to another day..
+
+Fixes: 6ea3de1b8ce7 ("dts: update to v5.11-rc1")
+Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
+Link: https://lore.pengutronix.de/20210312082218.17058-1-a.fatoum@pengutronix.de
+---
+ drivers/of/base.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/of/base.c b/drivers/of/base.c
+index 8759099d7480..6fe02649ee53 100644
+--- a/drivers/of/base.c
++++ b/drivers/of/base.c
+@@ -2272,6 +2272,8 @@ const char *of_get_model(void)
+ const struct of_device_id of_default_bus_match_table[] = {
+ 	{
+ 		.compatible = "simple-bus",
++	}, {
++		.compatible = "simple-pm-bus",
+ 	}, {
+ 		.compatible = "simple-mfd",
+ 	}, {
diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/series b/configs/platform-v7a/patches/barebox-2021.02.0/series
new file mode 100644
index 000000000000..0654fa5ec638
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2021.02.0/series
@@ -0,0 +1,6 @@
+# generated by git-ptx-patches
+#tag:base --start-number 1
+of-base-probe-simple-pm-bus-children-as-well.patch
+net-phy-fix-waiting-for-link.patch
+bcm283X-Select-OF-clock-providers.patch
+# ad5056773d1eb319e6b321f55c67cc0c  - git-ptx-patches magic
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 9145bb8e4a08..2ef8b8e87b61 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -176,8 +176,8 @@ PTXCONF_CONSOLE_SPEED="115200"
 # PTXCONF_AT91BOOTSTRAP2 is not set
 PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
 PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2020.09.0"
-PTXCONF_BAREBOX_COMMON_MD5="907dc813298fcded06fa9c788d3fb6c8"
+PTXCONF_BAREBOX_COMMON_VERSION="2021.02.0"
+PTXCONF_BAREBOX_COMMON_MD5="07045e34faa1135d9cd18503186b2d7f"
 PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
 PTXCONF_BAREBOX_AM335X_MLO=y
 PTXCONF_BAREBOX_AM335X=y
diff --git a/configs/platform-v7a/rules/barebox-stm32mp.make b/configs/platform-v7a/rules/barebox-stm32mp.make
index 82a3c3178f66..2ad1fa4d02b6 100644
--- a/configs/platform-v7a/rules/barebox-stm32mp.make
+++ b/configs/platform-v7a/rules/barebox-stm32mp.make
@@ -43,7 +43,7 @@ BAREBOX_STM32MP_MAKE_ENV := $(BAREBOX_STM32MP_CONF_ENV)
 BAREBOX_STM32MP_MAKE_OPT := $(BAREBOX_STM32MP_CONF_OPT)
 
 BAREBOX_STM32MP_IMAGES := \
-	images/barebox-stm32mp157c-dk2.img \
+	images/barebox-stm32mp15xx-dkx.img \
 	images/barebox-stm32mp157c-lxa-mc1.img
 
 BAREBOX_STM32MP_IMAGES := $(addprefix $(BAREBOX_STM32MP_DIR)/,$(BAREBOX_STM32MP_IMAGES))
diff --git a/configs/platform-v7a/rules/image-stm32mp157c-dk2.make b/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
index 2c739d388c93..7c0f4424936a 100644
--- a/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
+++ b/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
@@ -13,7 +13,7 @@ IMAGE_PACKAGES-$(PTXCONF_IMAGE_STM32MP157C_DK2) += image-stm32mp157c-dk2
 
 IMAGE_STM32MP157C_DK2_ENV := \
 	STM32MP_BOARD_FSBL=stm32mp157c-dk2 \
-	STM32MP_BOARD_SSBL=stm32mp157c-dk2
+	STM32MP_BOARD_SSBL=stm32mp15xx-dkx
 
 #
 # Paths and names
diff --git a/configs/platform-v7a/run b/configs/platform-v7a/run
index 1dc4fd645d88..65fa068e3bac 100755
--- a/configs/platform-v7a/run
+++ b/configs/platform-v7a/run
@@ -65,7 +65,7 @@ if [ -z "${QEMU_NET}" ]; then
 	QEMU_NET=(-netdev user,id=net1,hostfwd=tcp:127.0.0.1:${TELNET_EXTERNAL_PORT}-:${TELNET_INTERNAL_PORT},hostfwd=tcp:127.0.0.1:${SSH_EXTERNAL_PORT}-:${SSH_INTERNAL_PORT} )
 fi
 
-BASE_CMDLINE="console=ttyAMA0,115200 loglevel=5 systemd.log_level=warning systemd.show_status=auto"
+BASE_CMDLINE="console=ttyAMA0,115200 systemd.show_status=auto"
 
 if [ -d "${PTXDIST_PLATFORMDIR}/root/.virtfs_metadata" ]; then
 	security_model="mapped-file"
-- 
2.30.1


_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2021-03-15  9:16 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-12 13:47 [DistroKit] [PATCH v2] v7a: barebox update 2020.09.0 -> 2021.02.0 Uwe Kleine-König
2021-03-12 14:03 ` Ahmad Fatoum
2021-03-12 18:52 ` Robert Schwebel
2021-03-13 10:48 ` Michael Olbrich
2021-03-13 13:17   ` Robert Schwebel
2021-03-13 13:41     ` Michael Olbrich
2021-03-15  9:16       ` Robert Schwebel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox