* [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule
@ 2023-05-31 11:47 Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 1/8] platforms: drop no longer needed blspec-rpi4 Ahmad Fatoum
` (8 more replies)
0 siblings, 9 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit
We already make use of the barebox multi-image support, which prefixes
the (compressed) barebox proper binary with a different prebootloader
(+ device tree) each time to support multiple boards in the same build.
So far, this was only possible within the same subarch, so while we had
one barebox rule for all of i.MX8MM/N/Q, we needed a separate barebox
rule for the Rockchip platforms.
barebox v2023.04.0 adds ARM "multiarch" support, which extends
multi-image support to work across subarches. This series enables it
for v8a and allows us to drop our barebox-imx8m and barebox-rockchip
rules in favor of the upstream PTXdist barebox rule.
The same could be done for v7a in the future too, but it would fatten
the bootloader images a bit more, because it would adds drivers for 6
unused platforms into each image (but not duplicate the DT). This is
left as future exercise.
v2 -> v3:
- rebase on next
- update to barebox v2023.05.0
- remove some more no longer needed left-over files
v1 -> v2:
- dropped v6.2->v6.3.1 kernel update in favor of upstream/next's
v6.2->v6.3 update
- dropped SD-Card speed quirk altogether. This has been fixed
upstream and the new maximum of 50MHz works for us, even with
usbsdmux in-between.
Ahmad Fatoum (8):
platforms: drop no longer needed blspec-rpi4
v8a: barebox: rock3a: drop no longer needed SD-Card speed quirk
v8a: barebox: version bump v2023.01.0 → v2023.05.0
Revert "v8a: barebox: rockchip: disable CONFIG_MMCBLKDEV_ROOTARG"
v8a: rockchip: use common environment
v8a: barebox: configure upstream barebox rule for both imx8m and
rockchip
v8a: barebox: switch to upstream rule
v8a: barebox: remove left-over SoC-specific rules
configs/platform-v7a/platformconfig | 1 -
.../barebox-common-defaultenv/init/bootsource | 10 +-
.../barebox-rock3a-defaultenv/init/bootsource | 14 -
.../nv/linux.bootargs.loglevel | 1 -
configs/platform-v8a/barebox-rockchip.config | 932 ------------------
.../{barebox-imx8m.config => barebox.config} | 261 ++---
.../config/images/imx8mm-evk.config | 2 +-
.../config/images/imx8mp-evk.config | 2 +-
.../config/images/imx8mq-evk.config | 2 +-
.../platform-v8a/config/images/rock3a.config | 6 +-
configs/platform-v8a/platformconfig | 31 +-
.../platform-v8a/platforms/barebox-imx8m.in | 10 -
.../platforms/barebox-rockchip.in | 14 -
.../platforms/image-imx8mm-evk.in | 2 +-
.../platforms/image-imx8mp-evk.in | 2 +-
.../platforms/image-imx8mq-evk.in | 2 +-
.../platform-v8a/platforms/image-rock3a.in | 2 +-
configs/platform-v8a/rules/barebox-imx8m.make | 125 ---
.../platform-v8a/rules/barebox-rockchip.make | 163 ---
configs/platform-v8a/rules/firmware-imx.in | 4 +
.../platform-v8a/rules/firmware-rockchip.in | 4 +
.../rules/post/barebox-fixup.make | 16 +
doc/hardware_v8a_rock3a.rst | 2 +-
platforms/blspec-rpi4.in | 7 -
projectroot/loader/entries/rpi400.conf | 6 -
projectroot/loader/entries/rpi4b.conf | 6 -
rules/blspec-rpi4.make | 38 -
27 files changed, 202 insertions(+), 1463 deletions(-)
delete mode 100644 configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
delete mode 100644 configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
delete mode 100644 configs/platform-v8a/barebox-rockchip.config
rename configs/platform-v8a/{barebox-imx8m.config => barebox.config} (82%)
delete mode 100644 configs/platform-v8a/platforms/barebox-imx8m.in
delete mode 100644 configs/platform-v8a/platforms/barebox-rockchip.in
delete mode 100644 configs/platform-v8a/rules/barebox-imx8m.make
delete mode 100644 configs/platform-v8a/rules/barebox-rockchip.make
create mode 100644 configs/platform-v8a/rules/post/barebox-fixup.make
delete mode 100644 platforms/blspec-rpi4.in
delete mode 100644 projectroot/loader/entries/rpi400.conf
delete mode 100644 projectroot/loader/entries/rpi4b.conf
delete mode 100644 rules/blspec-rpi4.make
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [DistroKit] [PATCH v3 1/8] platforms: drop no longer needed blspec-rpi4
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
@ 2023-05-31 11:47 ` Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 2/8] v8a: barebox: rock3a: drop no longer needed SD-Card speed quirk Ahmad Fatoum
` (7 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
Now that we have commits:
- 552ea42fe7aa ("v8a: blspec: switch to default blspec entry")
- b7a4fe185852 ("v7a: blspec: convert to ptxdist default entries")
we don't need special dedicated blspec rules anymore for v7a/v8a, so drop
the last one we had left.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
configs/platform-v7a/platformconfig | 1 -
configs/platform-v8a/platformconfig | 1 -
platforms/blspec-rpi4.in | 7 -----
projectroot/loader/entries/rpi400.conf | 6 ----
projectroot/loader/entries/rpi4b.conf | 6 ----
rules/blspec-rpi4.make | 38 --------------------------
6 files changed, 59 deletions(-)
delete mode 100644 platforms/blspec-rpi4.in
delete mode 100644 projectroot/loader/entries/rpi400.conf
delete mode 100644 projectroot/loader/entries/rpi4b.conf
delete mode 100644 rules/blspec-rpi4.make
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 94efb206e41c..5e37156b3180 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -229,7 +229,6 @@ PTXCONF_BLSPEC_ENTRY=y
PTXCONF_BLSPEC_ENTRY_DEVICETREE=y
PTXCONF_BLSPEC_ENTRY_CMDLINE="rootwait rw"
PTXCONF_BLSPEC_ENTRY_APPENDROOT=y
-# PTXCONF_BLSPEC_RPI4 is not set
# end of bootloader spec entries
#
diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
index e29e96046faf..98e5840760a8 100644
--- a/configs/platform-v8a/platformconfig
+++ b/configs/platform-v8a/platformconfig
@@ -210,7 +210,6 @@ PTXCONF_BLSPEC_ENTRY=y
PTXCONF_BLSPEC_ENTRY_DEVICETREE=y
PTXCONF_BLSPEC_ENTRY_CMDLINE="rootwait"
PTXCONF_BLSPEC_ENTRY_APPENDROOT=y
-PTXCONF_BLSPEC_RPI4=y
# end of bootloader spec entries
#
diff --git a/platforms/blspec-rpi4.in b/platforms/blspec-rpi4.in
deleted file mode 100644
index aa3e7aff5ae3..000000000000
--- a/platforms/blspec-rpi4.in
+++ /dev/null
@@ -1,7 +0,0 @@
-## SECTION=blspec
-
-config BLSPEC_RPI4
- tristate
- # make sure it's only visible on platforms, where it makes sense
- depends on ARCH_ARM && ARCH_ARMV7_NEON || ARCH_ARM64
- prompt "/loader/entries/rpi4*.conf bootloader spec entries"
diff --git a/projectroot/loader/entries/rpi400.conf b/projectroot/loader/entries/rpi400.conf
deleted file mode 100644
index 4d212c0b9e71..000000000000
--- a/projectroot/loader/entries/rpi400.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-title Raspberry Pi 400 - Pengutronix-DistroKit
-version 4.6
-options rootwait rw
-linux /boot/zImage
-devicetree /boot/bcm2711-rpi-400.dtb
-linux-appendroot true
diff --git a/projectroot/loader/entries/rpi4b.conf b/projectroot/loader/entries/rpi4b.conf
deleted file mode 100644
index c0fd6f1fa5d8..000000000000
--- a/projectroot/loader/entries/rpi4b.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-title Raspberry Pi 4b - Pengutronix-DistroKit
-version 4.6
-options rootwait rw
-linux /boot/zImage
-devicetree /boot/bcm2711-rpi-4-b.dtb
-linux-appendroot true
diff --git a/rules/blspec-rpi4.make b/rules/blspec-rpi4.make
deleted file mode 100644
index 50a5f88ac9cf..000000000000
--- a/rules/blspec-rpi4.make
+++ /dev/null
@@ -1,38 +0,0 @@
-# -*-makefile-*-
-#
-# Copyright (C) 2022 by Ahmad Fatoum <a.fatoum@pengutronix.de>
-#
-# For further information about the PTXdist project and license conditions
-# see the README file.
-#
-
-#
-# We provide this package
-#
-PACKAGES-$(PTXCONF_BLSPEC_RPI4) += blspec-rpi4
-
-BLSPEC_RPI4_VERSION := 4.6
-
-# ----------------------------------------------------------------------------
-# Target-Install
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/blspec-rpi4.targetinstall:
- @$(call targetinfo)
-
- @$(call install_init, blspec-rpi4)
- @$(call install_fixup,blspec-rpi4,PRIORITY,optional)
- @$(call install_fixup,blspec-rpi4,SECTION,base)
- @$(call install_fixup,blspec-rpi4,AUTHOR,"Ahmad Fatoum <a.fatoum@pengutronix.de>")
- @$(call install_fixup,blspec-rpi4,DESCRIPTION,missing)
-
- @$(call install_alternative, blspec-rpi4, 0, 0, 0644, \
- /loader/entries/rpi4b.conf)
- @$(call install_alternative, blspec-rpi4, 0, 0, 0644, \
- /loader/entries/rpi400.conf)
-
- @$(call install_finish,blspec-rpi4)
-
- @$(call touch)
-
-# vim: syntax=make
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [DistroKit] [PATCH v3 2/8] v8a: barebox: rock3a: drop no longer needed SD-Card speed quirk
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 1/8] platforms: drop no longer needed blspec-rpi4 Ahmad Fatoum
@ 2023-05-31 11:47 ` Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 3/8] v8a: barebox: version bump v2023.01.0 → v2023.05.0 Ahmad Fatoum
` (6 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
SD-Card signal integrity on the Rock-3A's board doesn't allow for
reliable sd-uhs-sdr104 operation. For this reason we had a device tree
fixup that removed the property. This has been fixed upstream in the
meantime and sd-uhs-sdr104 was replaced with the slower sd-uhs-sdr50,
which works fine for us, even with a usbsdmux in-between.
Thus drop this fixup again.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource | 1 -
1 file changed, 1 deletion(-)
diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource b/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
index 6a3bb42ba3af..fe7991dbc13c 100644
--- a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
+++ b/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
@@ -7,7 +7,6 @@ fi
if [ "$bootsource" = mmc ]; then
detect mmc$bootsource_instance
global.boot.default="mmc$bootsource_instance net"
- of_property -df mmc0 sd-uhs-sdr104
elif [ "$bootsource" = "spi-nor" ]; then
usbgadget -A '/dev/mmc0(sd)'
global.autoboot=abort
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [DistroKit] [PATCH v3 3/8] v8a: barebox: version bump v2023.01.0 → v2023.05.0
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 1/8] platforms: drop no longer needed blspec-rpi4 Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 2/8] v8a: barebox: rock3a: drop no longer needed SD-Card speed quirk Ahmad Fatoum
@ 2023-05-31 11:47 ` Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 4/8] Revert "v8a: barebox: rockchip: disable CONFIG_MMCBLKDEV_ROOTARG" Ahmad Fatoum
` (5 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
As preparation for combining barebox-rockchip and barebox-imx8m, let's
update both to v2023.05.0, which is the second release that can target
both with the same build.
This barebox update also pulls in the kernel DT update that moved
around the DT aliases for the Radxa boards. For this reason, we need
to touch up the environment as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
configs/platform-v8a/barebox-imx8m.config | 134 +++++-------------
.../barebox-rock3a-defaultenv/init/bootsource | 2 +-
configs/platform-v8a/barebox-rockchip.config | 53 +++----
configs/platform-v8a/rules/barebox-imx8m.make | 4 +-
.../platform-v8a/rules/barebox-rockchip.make | 4 +-
5 files changed, 66 insertions(+), 131 deletions(-)
diff --git a/configs/platform-v8a/barebox-imx8m.config b/configs/platform-v8a/barebox-imx8m.config
index ae53d9337ee0..1fe5703d9865 100644
--- a/configs/platform-v8a/barebox-imx8m.config
+++ b/configs/platform-v8a/barebox-imx8m.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.01.0 Configuration
+# Barebox/arm 2023.05.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -10,32 +10,13 @@ CONFIG_TEXT_BASE=0x0
#
# System Type
#
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCM283X is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGIC is not set
-# CONFIG_ARCH_EP93XX is not set
-CONFIG_ARCH_IMX=y
+CONFIG_ARCH_MULTIARCH=y
# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_S3C24xx is not set
-# CONFIG_ARCH_S5PCxx is not set
-# CONFIG_ARCH_S3C64xx is not set
-# CONFIG_ARCH_STM32MP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_UEMD is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_ARCH_ARM64_VIRT is not set
+# CONFIG_ARCH_BCM283X is not set
+CONFIG_ARCH_IMX=y
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_ZYNQMP is not set
#
# Processor Type
@@ -49,89 +30,32 @@ CONFIG_CPU_64v8=y
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
CONFIG_ARCH_IMX_IMXIMAGE=y
#
-# Freescale i.MX System-on-Chip
+# i.MX boards
#
CONFIG_ARCH_IMX8M=y
CONFIG_ARCH_IMX8MM=y
CONFIG_ARCH_IMX8MP=y
CONFIG_ARCH_IMX8MQ=y
-CONFIG_IMX_MULTI_BOARDS=y
-# CONFIG_MACH_SCB9328 is not set
-# CONFIG_MACH_TX25 is not set
-# CONFIG_MACH_PCA100 is not set
-# CONFIG_MACH_PCM038 is not set
-# CONFIG_MACH_KINDLE_MX50 is not set
-# CONFIG_MACH_CCMX51 is not set
-# CONFIG_MACH_EFIKA_MX_SMARTBOOK is not set
-# CONFIG_MACH_EMBEDSKY_E9 is not set
-# CONFIG_MACH_FREESCALE_MX51_PDK is not set
-# CONFIG_MACH_CCMX53 is not set
-# CONFIG_MACH_FREESCALE_MX53_LOCO is not set
-# CONFIG_MACH_GUF_VINCELL is not set
-# CONFIG_MACH_TQMA53 is not set
-# CONFIG_MACH_FREESCALE_MX53_VMX53 is not set
-# CONFIG_MACH_TX53 is not set
-# CONFIG_MACH_PHYTEC_SOM_IMX6 is not set
-# CONFIG_MACH_PROTONIC_IMX6 is not set
-# CONFIG_MACH_PROTONIC_IMX8M is not set
+
+#
+# i.MX8M boards
+#
# CONFIG_MACH_INNOCOMM_WB15 is not set
-# CONFIG_MACH_KONTRON_SAMX6I is not set
-# CONFIG_MACH_DFI_FS700_M60 is not set
-# CONFIG_MACH_GUF_SANTARO is not set
-# CONFIG_MACH_REALQ7 is not set
-# CONFIG_MACH_GK802 is not set
-# CONFIG_MACH_ELTEC_HIPERCAM is not set
-# CONFIG_MACH_TQMA6X is not set
-# CONFIG_MACH_TQMA6UL is not set
-# CONFIG_MACH_TX6X is not set
-# CONFIG_MACH_SABRELITE is not set
-# CONFIG_MACH_SABRESD is not set
-# CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB is not set
-# CONFIG_MACH_NITROGEN6 is not set
-# CONFIG_MACH_SOLIDRUN_MICROSOM is not set
-# CONFIG_MACH_TECHNEXION_PICO_HOBBIT is not set
-# CONFIG_MACH_TECHNEXION_WANDBOARD is not set
-# CONFIG_MACH_EMBEST_MARSBOARD is not set
-# CONFIG_MACH_EMBEST_RIOTBOARD is not set
-# CONFIG_MACH_UDOO is not set
-# CONFIG_MACH_UDOO_NEO is not set
-# CONFIG_MACH_VARISCITE_MX6 is not set
-# CONFIG_MACH_GW_VENTANA is not set
-# CONFIG_MACH_CM_FX6 is not set
-# CONFIG_MACH_ADVANTECH_ROM_742X is not set
-# CONFIG_MACH_WARP7 is not set
-# CONFIG_MACH_AC_SXB is not set
-# CONFIG_MACH_MEERKAT96 is not set
-# CONFIG_MACH_VF610_TWR is not set
-# CONFIG_MACH_ZII_RDU1 is not set
-# CONFIG_MACH_ZII_RDU2 is not set
-# CONFIG_MACH_ZII_IMX8MQ_DEV is not set
-# CONFIG_MACH_ZII_VF610_DEV is not set
-# CONFIG_MACH_ZII_IMX7D_DEV is not set
-# CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
-# CONFIG_MACH_FREESCALE_MX7_SABRESD is not set
-# CONFIG_MACH_KAMSTRUP_MX7_CONCENTRATOR is not set
-# CONFIG_MACH_NXP_IMX6ULL_EVK is not set
+# CONFIG_MACH_MNT_REFORM is not set
CONFIG_MACH_NXP_IMX8MM_EVK=y
# CONFIG_MACH_NXP_IMX8MN_EVK is not set
CONFIG_MACH_NXP_IMX8MP_EVK=y
CONFIG_MACH_NXP_IMX8MQ_EVK=y
CONFIG_MACH_PHYTEC_SOM_IMX8MQ=y
+# CONFIG_MACH_POLYHEX_DEBIX is not set
+# CONFIG_MACH_PROTONIC_IMX8M is not set
# CONFIG_MACH_TQ_MBA8MPXL is not set
-# CONFIG_MACH_GRINN_LITEBOARD is not set
-# CONFIG_MACH_DIGI_CCIMX6ULSBCPRO is not set
-# CONFIG_MACH_WEBASTO_CCBV2 is not set
-# CONFIG_MACH_MNT_REFORM is not set
-# CONFIG_MACH_SKOV_IMX6 is not set
-
-#
-# Board specific settings
-#
-# end of Board specific settings
+# CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP is not set
+# CONFIG_MACH_ZII_IMX8MQ_DEV is not set
+# end of i.MX boards
#
# i.MX specific settings
@@ -271,6 +195,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_REBOOT_MODE=y
# CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG is not set
CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
CONFIG_HAS_SCHED=y
@@ -303,8 +228,11 @@ CONFIG_FASTBOOT_CMD_OEM=y
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
# CONFIG_DEBUG_LL is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_IMX_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
@@ -562,6 +490,8 @@ CONFIG_PHYLIB=y
#
# CONFIG_DRIVER_NET_BCMGENET is not set
# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
+CONFIG_DRIVER_NET_DESIGNWARE_EQOS=y
+CONFIG_DRIVER_NET_DESIGNWARE_IMX8=y
# CONFIG_DRIVER_NET_ENC28J60 is not set
CONFIG_DRIVER_NET_FEC_IMX=y
# CONFIG_DRIVER_NET_FSL_FMAN is not set
@@ -692,6 +622,7 @@ CONFIG_USB_STORAGE=y
# USB Miscellaneous drivers
#
# CONFIG_USB_HUB_USB251XB is not set
+# CONFIG_USB_ONBOARD_HUB is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DRIVER_ARC_PBL=y
CONFIG_USB_GADGET_DUALSPEED=y
@@ -734,6 +665,7 @@ CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMMON_CLK_GPIO=y
#
# Clocksource
@@ -754,7 +686,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
# CONFIG_MFD_MC34704 is not set
# CONFIG_MFD_MC9SDZ60 is not set
# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_SYSCON is not set
+CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
CONFIG_RAVE_SP_CORE=y
@@ -763,6 +695,7 @@ CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_ROHM_BD718XX is not set
# end of Multifunction device drivers
#
@@ -859,6 +792,7 @@ CONFIG_RAVE_SP_EEPROM=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED=y
# CONFIG_REGULATOR_PFUZE is not set
+# CONFIG_REGULATOR_ANATOP is not set
#
# Remoteproc drivers
@@ -893,6 +827,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
# CONFIG_ARM_SCMI_PROTOCOL is not set
+# CONFIG_QEMU_FW_CFG is not set
# end of Firmware Drivers
#
@@ -904,7 +839,12 @@ CONFIG_RTC_DRV_DS1307=y
CONFIG_GENERIC_PHY=y
CONFIG_USB_NOP_XCEIV=y
CONFIG_PHY_FSL_IMX8MQ_USB=y
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Hardware crypto devices
+#
+# CONFIG_FSL_CAAM_RNG_PBL_INIT is not set
+# end of Hardware crypto devices
#
# Memory controller drivers
@@ -939,6 +879,8 @@ CONFIG_IMX8M_FEATCTRL=y
CONFIG_IMX8M_DRAM=y
# end of i.MX8M DDR controllers
+CONFIG_REBOOT_MODE=y
+CONFIG_SYSCON_REBOOT_MODE=y
# CONFIG_NVMEM_REBOOT_MODE is not set
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
@@ -1027,7 +969,7 @@ CONFIG_CRC_CCITT=y
# end of Library gui routines
CONFIG_PRINTF_UUID=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource b/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
index fe7991dbc13c..bc81609a49c0 100644
--- a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
+++ b/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
@@ -8,6 +8,6 @@ if [ "$bootsource" = mmc ]; then
detect mmc$bootsource_instance
global.boot.default="mmc$bootsource_instance net"
elif [ "$bootsource" = "spi-nor" ]; then
- usbgadget -A '/dev/mmc0(sd)'
+ usbgadget -A '/dev/mmc1(sd)'
global.autoboot=abort
fi
diff --git a/configs/platform-v8a/barebox-rockchip.config b/configs/platform-v8a/barebox-rockchip.config
index 60c851702ca9..7af10a51f840 100644
--- a/configs/platform-v8a/barebox-rockchip.config
+++ b/configs/platform-v8a/barebox-rockchip.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.01.0 Configuration
+# Barebox/arm 2023.05.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -9,32 +9,13 @@ CONFIG_TEXT_BASE=0x0
#
# System Type
#
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCM283X is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGIC is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_IMX is not set
+CONFIG_ARCH_MULTIARCH=y
# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_PXA is not set
-CONFIG_ARCH_ROCKCHIP=y
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_S3C24xx is not set
-# CONFIG_ARCH_S5PCxx is not set
-# CONFIG_ARCH_S3C64xx is not set
-# CONFIG_ARCH_STM32MP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_UEMD is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_ARCH_ARM64_VIRT is not set
+# CONFIG_ARCH_BCM283X is not set
+# CONFIG_ARCH_IMX is not set
+CONFIG_ARCH_ROCKCHIP=y
+# CONFIG_ARCH_ZYNQMP is not set
#
# Processor Type
@@ -48,7 +29,6 @@ CONFIG_CPU_64v8=y
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
CONFIG_ARCH_TEXT_BASE=0x0
#
@@ -61,16 +41,16 @@ CONFIG_ARCH_RK3568=y
#
# select Rockchip boards:
#
-# CONFIG_MACH_RADXA_ROCK is not set
-# CONFIG_MACH_PHYTEC_SOM_RK3288 is not set
CONFIG_MACH_RK3568_EVB=y
# CONFIG_MACH_RK3568_BPI_R2PRO is not set
# CONFIG_MACH_PINE64_QUARTZ64 is not set
CONFIG_MACH_RADXA_ROCK3=y
+# CONFIG_MACH_RADXA_CM3 is not set
#
# select board features:
#
+CONFIG_ARCH_ROCKCHIP_ATF=y
# CONFIG_ARCH_RK3568_OPTEE is not set
# end of Rockchip Features
@@ -237,8 +217,11 @@ CONFIG_FASTBOOT_CMD_OEM=y
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
# CONFIG_DEBUG_LL is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_ROCKCHIP_UART_PORT=2
# CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
@@ -463,6 +446,8 @@ CONFIG_NET_FASTBOOT=y
#
# Drivers
#
+CONFIG_REGMAP_FORMATTED=y
+CONFIG_REGMAP_I2C=y
CONFIG_OFTREE=y
CONFIG_OFTREE_MEM_GENERIC=y
CONFIG_DTC=y
@@ -582,6 +567,7 @@ CONFIG_USB_STORAGE=y
# USB Miscellaneous drivers
#
# CONFIG_USB_HUB_USB251XB is not set
+# CONFIG_USB_ONBOARD_HUB is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_AUTOSTART=y
@@ -618,6 +604,7 @@ CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMMON_CLK_GPIO=y
#
# Clocksource
@@ -646,6 +633,7 @@ CONFIG_MFD_SYSCON=y
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_RK808=y
# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_ROHM_BD718XX is not set
# end of Multifunction device drivers
#
@@ -748,6 +736,7 @@ CONFIG_RESET_CONTROLLER=y
# Firmware Drivers
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
+# CONFIG_QEMU_FW_CFG is not set
# end of Firmware Drivers
#
@@ -761,7 +750,11 @@ CONFIG_GENERIC_PHY=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Hardware crypto devices
+#
+# end of Hardware crypto devices
#
# Memory controller drivers
@@ -880,7 +873,7 @@ CONFIG_IMAGE_SPARSE=y
#
# end of Library gui routines
-# CONFIG_NLS is not set
+CONFIG_NLS=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
diff --git a/configs/platform-v8a/rules/barebox-imx8m.make b/configs/platform-v8a/rules/barebox-imx8m.make
index f068865c2182..f4b169784be3 100644
--- a/configs/platform-v8a/rules/barebox-imx8m.make
+++ b/configs/platform-v8a/rules/barebox-imx8m.make
@@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_BAREBOX_IMX8M) += barebox-imx8m
#
# Paths and names
#
-BAREBOX_IMX8M_VERSION := 2023.01.0
-BAREBOX_IMX8M_MD5 := 884680a110d252e3ae18589b18848ed9
+BAREBOX_IMX8M_VERSION := 2023.05.0
+BAREBOX_IMX8M_MD5 := 35a6a96f00df2a3f596efdc5d2459cb5
BAREBOX_IMX8M := barebox-imx8m-$(BAREBOX_IMX8M_VERSION)
BAREBOX_IMX8M_SUFFIX := tar.bz2
BAREBOX_IMX8M_URL := $(call barebox-url, BAREBOX_IMX8M)
diff --git a/configs/platform-v8a/rules/barebox-rockchip.make b/configs/platform-v8a/rules/barebox-rockchip.make
index 87ea4730e42b..805c8749d710 100644
--- a/configs/platform-v8a/rules/barebox-rockchip.make
+++ b/configs/platform-v8a/rules/barebox-rockchip.make
@@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_BAREBOX_ROCKCHIP) += barebox-rockchip
#
# Paths and names
#
-BAREBOX_ROCKCHIP_VERSION := 2023.01.0
-BAREBOX_ROCKCHIP_MD5 := 884680a110d252e3ae18589b18848ed9
+BAREBOX_ROCKCHIP_VERSION := 2023.05.0
+BAREBOX_ROCKCHIP_MD5 := 35a6a96f00df2a3f596efdc5d2459cb5
BAREBOX_ROCKCHIP := barebox-rockchip-$(BAREBOX_ROCKCHIP_VERSION)
BAREBOX_ROCKCHIP_SUFFIX := tar.bz2
BAREBOX_ROCKCHIP_URL := $(call barebox-url, BAREBOX_ROCKCHIP)
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [DistroKit] [PATCH v3 4/8] Revert "v8a: barebox: rockchip: disable CONFIG_MMCBLKDEV_ROOTARG"
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
` (2 preceding siblings ...)
2023-05-31 11:47 ` [DistroKit] [PATCH v3 3/8] v8a: barebox: version bump v2023.01.0 → v2023.05.0 Ahmad Fatoum
@ 2023-05-31 11:47 ` Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 5/8] v8a: rockchip: use common environment Ahmad Fatoum
` (4 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
Now that we have updated both Linux and barebox, it's fine again to fixup
root=/dev/mmcblk into the kernel command line instead of using
PARTUUIDs, thus let's enable this option again.
This reverts commit be52a8f5dff489db9e8e8c7dcc8fe53106a8dede.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
configs/platform-v8a/barebox-rockchip.config | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/platform-v8a/barebox-rockchip.config b/configs/platform-v8a/barebox-rockchip.config
index 7af10a51f840..e95cc37cdb22 100644
--- a/configs/platform-v8a/barebox-rockchip.config
+++ b/configs/platform-v8a/barebox-rockchip.config
@@ -159,7 +159,7 @@ CONFIG_BOOTM_OFTREE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [DistroKit] [PATCH v3 5/8] v8a: rockchip: use common environment
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
` (3 preceding siblings ...)
2023-05-31 11:47 ` [DistroKit] [PATCH v3 4/8] Revert "v8a: barebox: rockchip: disable CONFIG_MMCBLKDEV_ROOTARG" Ahmad Fatoum
@ 2023-05-31 11:47 ` Ahmad Fatoum
2023-06-23 13:04 ` Roland Hieber
2023-05-31 11:47 ` [DistroKit] [PATCH v3 6/8] v8a: barebox: configure upstream barebox rule for both imx8m and rockchip Ahmad Fatoum
` (3 subsequent siblings)
8 siblings, 1 reply; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
This effectively reverts commit 95014f4d8a50 ("v8a: rockchip: copy default
barebox env"). The common environment and the rockchip one are now
identical.
The spi-nor part is just for the Rockchip board though, so let's make
its execution conditional and drop barebox-rock3a-defaultenv.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
.../barebox-common-defaultenv/init/bootsource | 10 +++++++---
.../barebox-rock3a-defaultenv/init/bootsource | 13 -------------
.../nv/linux.bootargs.loglevel | 1 -
configs/platform-v8a/rules/barebox-rockchip.make | 2 +-
4 files changed, 8 insertions(+), 18 deletions(-)
delete mode 100644 configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
delete mode 100644 configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
diff --git a/configs/platform-v8a/barebox-common-defaultenv/init/bootsource b/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
index 8f00bced5df2..db1915321531 100644
--- a/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
+++ b/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
@@ -8,7 +8,11 @@ fi
if [ "$bootsource" = mmc ]; then
detect mmc$bootsource_instance
global.boot.default="mmc$bootsource_instance net"
-elif [ "$bootsource" = "spi-nor" ]; then
- usbgadget -A '/dev/mmc0(sd)'
- global.autoboot=abort
+fi
+
+if [ "${global.model}" = "Radxa ROCK3 Model A" ]; then
+ if [ "$bootsource" = "spi-nor" ]; then
+ usbgadget -A '/dev/mmc1(sd)'
+ global.autoboot=abort
+ fi
fi
diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource b/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
deleted file mode 100644
index bc81609a49c0..000000000000
--- a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-if [ -n "${nv.boot.default}" ]; then
- exit
-fi
-
-if [ "$bootsource" = mmc ]; then
- detect mmc$bootsource_instance
- global.boot.default="mmc$bootsource_instance net"
-elif [ "$bootsource" = "spi-nor" ]; then
- usbgadget -A '/dev/mmc1(sd)'
- global.autoboot=abort
-fi
diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
deleted file mode 100644
index 705752ca416d..000000000000
--- a/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
+++ /dev/null
@@ -1 +0,0 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
diff --git a/configs/platform-v8a/rules/barebox-rockchip.make b/configs/platform-v8a/rules/barebox-rockchip.make
index 805c8749d710..1ca7e8c109ee 100644
--- a/configs/platform-v8a/rules/barebox-rockchip.make
+++ b/configs/platform-v8a/rules/barebox-rockchip.make
@@ -69,7 +69,7 @@ $(BAREBOX_ROCKCHIP_CONFIG):
endif
BAREBOX_ROCKCHIP_EXTRA_ENV_PATH := $(foreach path, \
- $(call remove_quotes,"barebox-rock3a-defaultenv"), \
+ $(call remove_quotes,"barebox-common-defaultenv"), \
$(call ptx/in-platformconfigdir,$(path)))
BAREBOX_ROCKCHIP_EXTRA_ENV_DEPS := \
$(BAREBOX_ROCKCHIP_EXTRA_ENV_PATH) \
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [DistroKit] [PATCH v3 6/8] v8a: barebox: configure upstream barebox rule for both imx8m and rockchip
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
` (4 preceding siblings ...)
2023-05-31 11:47 ` [DistroKit] [PATCH v3 5/8] v8a: rockchip: use common environment Ahmad Fatoum
@ 2023-05-31 11:47 ` Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 7/8] v8a: barebox: switch to upstream rule Ahmad Fatoum
` (2 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
So far, we duplicated the barebox rules, so we can customize them for
each of imx8m and rockchip platforms. With v2023.04.0, we can configure
the same barebox build to generate binaries for both at the cost of
compiling in some unused drivers (but not duplicating DT). Let's do
that.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
configs/platform-v8a/barebox.config | 1087 +++++++++++++++++
configs/platform-v8a/platformconfig | 28 +-
configs/platform-v8a/rules/firmware-imx.in | 4 +
.../platform-v8a/rules/firmware-rockchip.in | 4 +
.../rules/post/barebox-fixup.make | 16 +
5 files changed, 1138 insertions(+), 1 deletion(-)
create mode 100644 configs/platform-v8a/barebox.config
create mode 100644 configs/platform-v8a/rules/post/barebox-fixup.make
diff --git a/configs/platform-v8a/barebox.config b/configs/platform-v8a/barebox.config
new file mode 100644
index 000000000000..a540e307e179
--- /dev/null
+++ b/configs/platform-v8a/barebox.config
@@ -0,0 +1,1087 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Barebox/arm 2023.05.0 Configuration
+#
+CONFIG_ARM=y
+CONFIG_ARM_LINUX=y
+CONFIG_ARM_USE_COMPRESSED_DTB=y
+CONFIG_TEXT_BASE=0x0
+
+#
+# System Type
+#
+CONFIG_ARCH_MULTIARCH=y
+# CONFIG_ARCH_LAYERSCAPE is not set
+# CONFIG_ARCH_ARM64_VIRT is not set
+# CONFIG_ARCH_BCM283X is not set
+CONFIG_ARCH_IMX=y
+CONFIG_ARCH_ROCKCHIP=y
+# CONFIG_ARCH_ZYNQMP is not set
+
+#
+# Processor Type
+#
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_CPU_64=y
+CONFIG_CPU_V8=y
+CONFIG_CPU_64v8=y
+
+#
+# processor features
+#
+# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
+CONFIG_ARCH_TEXT_BASE=0x0
+CONFIG_ARCH_IMX_IMXIMAGE=y
+
+#
+# i.MX boards
+#
+CONFIG_ARCH_IMX8M=y
+CONFIG_ARCH_IMX8MM=y
+CONFIG_ARCH_IMX8MP=y
+CONFIG_ARCH_IMX8MQ=y
+
+#
+# i.MX8M boards
+#
+# CONFIG_MACH_INNOCOMM_WB15 is not set
+# CONFIG_MACH_MNT_REFORM is not set
+CONFIG_MACH_NXP_IMX8MM_EVK=y
+# CONFIG_MACH_NXP_IMX8MN_EVK is not set
+CONFIG_MACH_NXP_IMX8MP_EVK=y
+CONFIG_MACH_NXP_IMX8MQ_EVK=y
+CONFIG_MACH_PHYTEC_SOM_IMX8MQ=y
+# CONFIG_MACH_POLYHEX_DEBIX is not set
+# CONFIG_MACH_PROTONIC_IMX8M is not set
+# CONFIG_MACH_TQ_MBA8MPXL is not set
+# CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP is not set
+# CONFIG_MACH_ZII_IMX8MQ_DEV is not set
+# end of i.MX boards
+
+#
+# i.MX specific settings
+#
+# CONFIG_IMX_IIM is not set
+CONFIG_IMX_SAVE_BOOTROM_LOG=y
+# CONFIG_HABV4 is not set
+# end of i.MX specific settings
+
+#
+# Rockchip Features
+#
+CONFIG_RK_TIMER=1
+CONFIG_ARCH_ROCKCHIP_V8=y
+CONFIG_ARCH_RK3568=y
+
+#
+# select Rockchip boards:
+#
+CONFIG_MACH_RK3568_EVB=y
+# CONFIG_MACH_RK3568_BPI_R2PRO is not set
+# CONFIG_MACH_PINE64_QUARTZ64 is not set
+CONFIG_MACH_RADXA_ROCK3=y
+# CONFIG_MACH_RADXA_CM3 is not set
+
+#
+# select board features:
+#
+CONFIG_ARCH_ROCKCHIP_ATF=y
+# CONFIG_ARCH_RK3568_OPTEE is not set
+# end of Rockchip Features
+
+# CONFIG_BOARD_ARM_GENERIC_DT is not set
+# end of System Type
+
+CONFIG_64BIT=y
+
+#
+# ARM specific settings
+#
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_EXCEPTIONS=y
+CONFIG_ARM_SMCCC=y
+CONFIG_ARM_PSCI_OF=y
+CONFIG_ARM_PSCI_CLIENT=y
+CONFIG_ARM_ATF=y
+# end of ARM specific settings
+
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_CACHE=y
+CONFIG_HAS_DMA=y
+CONFIG_ARCH_HAS_SJLJ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_BLOCK=y
+CONFIG_BLOCK_WRITE=y
+CONFIG_FILETYPE=y
+CONFIG_BINFMT=y
+CONFIG_UIMAGE=y
+CONFIG_LOGBUF=y
+CONFIG_STDDEV=y
+CONFIG_MENUTREE=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_USBGADGET_START=y
+CONFIG_BOOT=y
+CONFIG_FASTBOOT_BASE=y
+
+#
+# General Settings
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_BANNER=y
+CONFIG_MEMINFO=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_GLOBALVAR=y
+CONFIG_NVVAR=y
+
+#
+# memory layout
+#
+CONFIG_HAVE_PBL_IMAGE=y
+CONFIG_HAVE_PBL_MULTI_IMAGES=y
+CONFIG_HAVE_IMAGE_COMPRESSION=y
+CONFIG_PBL_IMAGE=y
+CONFIG_PBL_MULTI_IMAGES=y
+CONFIG_USE_COMPRESSED_DTB=y
+CONFIG_PBL_RELOCATABLE=y
+CONFIG_IMAGE_COMPRESSION=y
+# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
+CONFIG_IMAGE_COMPRESSION_LZO=y
+# CONFIG_IMAGE_COMPRESSION_GZIP is not set
+# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
+# CONFIG_IMAGE_COMPRESSION_NONE is not set
+CONFIG_MMU=y
+CONFIG_MMU_EARLY=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
+CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
+CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
+CONFIG_STACK_SIZE=0x8000
+CONFIG_MALLOC_SIZE=0x0
+# end of memory layout
+
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_MALLOC_DLMALLOC is not set
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_RELOCATABLE=y
+# CONFIG_PANIC_HANG is not set
+CONFIG_PROMPT="barebox:"
+CONFIG_BAUDRATE=115200
+CONFIG_CBSIZE=1024
+CONFIG_FIRMWARE=y
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+# CONFIG_SHELL_NONE is not set
+CONFIG_GLOB=y
+CONFIG_GLOB_SORT=y
+CONFIG_PROMPT_HUSH_PS2="> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+# CONFIG_PASSWORD is not set
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_BOOTM=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
+CONFIG_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_BOOTM_AIMAGE is not set
+# CONFIG_BOOTM_ELF is not set
+# CONFIG_BOOTM_FITIMAGE is not set
+CONFIG_BLSPEC=y
+CONFIG_FLEXIBLE_BOOTARGS=y
+CONFIG_MMCBLKDEV_ROOTARG=y
+CONFIG_BAREBOX_UPDATE=y
+CONFIG_SYSTEM_PARTITIONS=y
+CONFIG_IMD=y
+CONFIG_CONSOLE_FULL=y
+# CONFIG_CONSOLE_SIMPLE is not set
+# CONFIG_CONSOLE_NONE is not set
+# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+# CONFIG_CONSOLE_ACTIVATE_ALL is not set
+CONFIG_CONSOLE_ACTIVATE_NONE=y
+CONFIG_CONSOLE_ALLOW_COLOR=y
+# CONFIG_CONSOLE_DISABLE_INPUT is not set
+CONFIG_PBL_CONSOLE=y
+CONFIG_CONSOLE_RATP=y
+# CONFIG_RATP_CMD_I2C is not set
+# CONFIG_RATP_CMD_GPIO is not set
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_PARTITION_DISK_DOS=y
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
+CONFIG_ENV_HANDLING=y
+CONFIG_DEFAULT_ENVIRONMENT=y
+CONFIG_DEFAULT_COMPRESSION_NONE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_REBOOT_MODE=y
+# CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG is not set
+CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
+CONFIG_HAS_SCHED=y
+CONFIG_POLLER=y
+# CONFIG_BTHREAD is not set
+CONFIG_STATE=y
+# CONFIG_STATE_CRYPTO is not set
+# CONFIG_STATE_BACKWARD_COMPATIBLE is not set
+CONFIG_BOOTCHOOSER=y
+CONFIG_RESET_SOURCE=y
+# CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
+CONFIG_EXTERNAL_DTS_FRAGMENTS=""
+
+#
+# OP-TEE loading
+#
+# CONFIG_BOOTM_OPTEE is not set
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+
+#
+# Android Fastboot
+#
+CONFIG_FASTBOOT_SPARSE=y
+CONFIG_FASTBOOT_CMD_OEM=y
+# end of Android Fastboot
+# end of General Settings
+
+#
+# Debugging
+#
+CONFIG_COMPILE_LOGLEVEL=6
+CONFIG_DEFAULT_LOGLEVEL=7
+# CONFIG_DEBUG_LL is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_IMX_UART_PORT=1
+CONFIG_DEBUG_ROCKCHIP_UART_PORT=2
+# CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_DEBUG_PBL is not set
+# CONFIG_DEBUG_PROBES is not set
+# CONFIG_PBL_BREAK is not set
+# CONFIG_PRINTF_FULL is not set
+# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
+# CONFIG_COMPILE_TEST is not set
+# end of Debugging
+
+#
+# EFI (Extensible Firmware Interface) Support
+#
+# end of EFI (Extensible Firmware Interface) Support
+
+CONFIG_HAS_DEBUG_LL=y
+CONFIG_COMMAND_SUPPORT=y
+CONFIG_COMPILE_HASH=y
+
+#
+# Commands
+#
+
+#
+# Information
+#
+# CONFIG_CMD_TUTORIAL is not set
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_CMD_BOOTROM=y
+CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_DEVLOOKUP is not set
+# CONFIG_CMD_DEVUNBIND is not set
+CONFIG_CMD_DMESG=y
+CONFIG_CMD_DRVINFO=y
+CONFIG_CMD_HELP=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_CMD_PM_DOMAIN is not set
+# CONFIG_CMD_NVMEM is not set
+CONFIG_CMD_VERSION=y
+# CONFIG_CMD_MMC is not set
+CONFIG_CMD_MMC_EXTCSD=y
+# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
+# end of Information
+
+#
+# Boot
+#
+CONFIG_CMD_BOOT=y
+CONFIG_CMD_BOOTM=y
+CONFIG_CMD_GO=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_LOADY is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_BOOTCHOOSER=y
+# end of Boot
+
+#
+# Partition
+#
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_AUTOMOUNT=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+# end of Partition
+
+#
+# Environment
+#
+CONFIG_CMD_NV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_DEFAULTENV=y
+CONFIG_CMD_GLOBAL=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
+# end of Environment
+
+#
+# File
+#
+CONFIG_CMD_BASENAME=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_CP=y
+# CONFIG_CMD_CMP is not set
+CONFIG_CMD_DIGEST=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_RMDIR=y
+CONFIG_CMD_SHA1SUM=y
+# CONFIG_CMD_SHA224SUM is not set
+# CONFIG_CMD_SHA256SUM is not set
+# CONFIG_CMD_SHA384SUM is not set
+# CONFIG_CMD_SHA512SUM is not set
+CONFIG_CMD_UNCOMPRESS=y
+# end of File
+
+#
+# Shell scripting
+#
+CONFIG_CMD_FALSE=y
+CONFIG_CMD_GETOPT=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_TRUE=y
+# end of Shell scripting
+
+#
+# Network
+#
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_HOST=y
+CONFIG_NET_CMD_IFUP=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_IP_ROUTE_GET=y
+# CONFIG_CMD_ETHLOG is not set
+# end of Network
+
+#
+# Console and Framebuffer interaction
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+# CONFIG_CMD_LOGIN is not set
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_MENUTREE=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+# end of Console and Framebuffer interaction
+
+#
+# Memory
+#
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MD=y
+CONFIG_CMD_MEMCMP=y
+CONFIG_CMD_MEMCPY=y
+CONFIG_CMD_MEMSET=y
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
+CONFIG_CMD_MM=y
+CONFIG_CMD_MW=y
+# end of Memory
+
+#
+# Hardware manipulation
+#
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_HWCLOCK=y
+CONFIG_CMD_HWMON=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USBGADGET=y
+CONFIG_CMD_WD=y
+CONFIG_CMD_WD_DEFAULT_TIMOUT=0
+# end of Hardware manipulation
+
+#
+# Miscellaneous
+#
+# CONFIG_CMD_2048 is not set
+CONFIG_CMD_BAREBOX_UPDATE=y
+# CONFIG_CMD_BLOBGEN is not set
+CONFIG_CMD_FIRMWARELOAD=y
+CONFIG_CMD_OF_DIFF=y
+CONFIG_CMD_OF_DUMP=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
+# CONFIG_CMD_OF_FIXUP_STATUS is not set
+CONFIG_CMD_OF_OVERLAY=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
+CONFIG_CMD_STATE=y
+# CONFIG_CMD_DHRYSTONE is not set
+# CONFIG_CMD_SPD_DECODE is not set
+# CONFIG_CMD_SEED is not set
+# end of Miscellaneous
+# end of Commands
+
+CONFIG_NET=y
+CONFIG_NET_NFS=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
+CONFIG_NET_IFUP=y
+CONFIG_NET_DHCP=y
+# CONFIG_NET_SNTP is not set
+CONFIG_NET_FASTBOOT=y
+
+#
+# Drivers
+#
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_FEATURE_CONTROLLER=y
+CONFIG_REGMAP_FORMATTED=y
+CONFIG_REGMAP_I2C=y
+CONFIG_OFTREE=y
+CONFIG_OFTREE_MEM_GENERIC=y
+CONFIG_DTC=y
+CONFIG_OFDEVICE=y
+CONFIG_FEATURE_CONTROLLER_FIXUP=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_OF_BAREBOX_ENV_IN_FS=y
+CONFIG_OF_OVERLAY=y
+# CONFIG_OF_OVERLAY_LIVE is not set
+CONFIG_AIODEV=y
+# CONFIG_QORIQ_THERMAL is not set
+# CONFIG_LM75 is not set
+# CONFIG_ST_GYRO is not set
+CONFIG_ROCKCHIP_SARADC=y
+
+#
+# serial drivers
+#
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_DRIVER_SERIAL_IMX=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+# CONFIG_DRIVER_SERIAL_CADENCE is not set
+# CONFIG_SERIAL_SIFIVE is not set
+# end of serial drivers
+
+CONFIG_ARCH_HAS_FEC_IMX=y
+CONFIG_PHYLIB=y
+
+#
+# Network drivers
+#
+# CONFIG_DRIVER_NET_BCMGENET is not set
+# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
+CONFIG_DRIVER_NET_DESIGNWARE_EQOS=y
+CONFIG_DRIVER_NET_DESIGNWARE_IMX8=y
+CONFIG_DRIVER_NET_DESIGNWARE_ROCKCHIP=y
+# CONFIG_DRIVER_NET_ENC28J60 is not set
+CONFIG_DRIVER_NET_FEC_IMX=y
+# CONFIG_DRIVER_NET_FSL_FMAN is not set
+# CONFIG_DRIVER_NET_KS8851_MLL is not set
+# CONFIG_DRIVER_NET_MICREL is not set
+# CONFIG_DRIVER_NET_SMC911X is not set
+# CONFIG_DRIVER_NET_SMC91111 is not set
+# CONFIG_DRIVER_NET_LITEETH is not set
+
+#
+# phylib
+#
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AR8327N_PHY is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+CONFIG_DP83867_PHY=y
+# CONFIG_DP83TD510_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_NATIONAL_PHY is not set
+CONFIG_REALTEK_PHY=y
+# CONFIG_SMSC_PHY is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+
+#
+# MII bus device drivers
+#
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
+# end of phylib
+
+CONFIG_NET_USB=y
+CONFIG_NET_USB_ASIX=y
+# CONFIG_USB_NET_AX88179_178A is not set
+CONFIG_NET_USB_SMSC95XX=y
+# CONFIG_NET_USB_RTL8152 is not set
+# CONFIG_DSA is not set
+# end of Network drivers
+
+#
+# SPI drivers
+#
+CONFIG_SPI=y
+CONFIG_SPI_MEM=y
+# CONFIG_DRIVER_SPI_FSL_QUADSPI is not set
+# CONFIG_DRIVER_SPI_GPIO is not set
+CONFIG_DRIVER_SPI_IMX=y
+CONFIG_DRIVER_SPI_IMX_2_3=y
+# CONFIG_DRIVER_SPI_LITEX_SPIFLASH is not set
+# CONFIG_SPI_NXP_FLEXSPI is not set
+# end of SPI drivers
+
+CONFIG_I2C=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_MV64XXX is not set
+CONFIG_I2C_RK3X=y
+# end of I2C Hardware Bus support
+
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_IMX_EARLY=y
+CONFIG_MTD=y
+CONFIG_MTD_WRITE=y
+CONFIG_MTD_OOB_DEVICE=y
+# CONFIG_MTD_RAW_DEVICE is not set
+# CONFIG_MTD_CONCAT is not set
+
+#
+# MTD debug options
+#
+# CONFIG_MTD_PEB_DEBUG is not set
+
+#
+# Self contained MTD devices
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_DOCG3 is not set
+# CONFIG_MTD_MTDRAM is not set
+# end of Self contained MTD devices
+
+# CONFIG_DRIVER_CFI is not set
+# CONFIG_NAND is not set
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+# CONFIG_SPI_CADENCE_QUADSPI is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_DISK=y
+CONFIG_DISK_WRITE=y
+
+#
+# drive types
+#
+# CONFIG_DISK_ATA is not set
+# CONFIG_DISK_AHCI is not set
+
+#
+# interface types
+#
+# CONFIG_DISK_INTF_PLATFORM_IDE is not set
+CONFIG_USB=y
+CONFIG_USB_HOST=y
+CONFIG_USB_IMX_CHIPIDEA=y
+CONFIG_USB_IMX_CHIPIDEA_USBMISC=y
+# CONFIG_USB_DWC2_HOST is not set
+# CONFIG_USB_DWC2_GADGET is not set
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_HOST is not set
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_DUAL_ROLE=y
+CONFIG_USB_DWC3_OF_SIMPLE=y
+# CONFIG_USB_EHCI is not set
+CONFIG_USB_XHCI=y
+# CONFIG_USB_ULPI is not set
+CONFIG_USB_OTGDEV=y
+CONFIG_USB_STORAGE=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_HUB_USB251XB is not set
+# CONFIG_USB_ONBOARD_HUB is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DRIVER_ARC_PBL=y
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_GADGET_DRIVER_ARC=y
+CONFIG_USB_GADGET_AUTOSTART=y
+
+#
+# USB Gadget drivers
+#
+# CONFIG_USB_GADGET_DFU is not set
+CONFIG_USB_GADGET_SERIAL=y
+CONFIG_USB_GADGET_FASTBOOT=y
+# CONFIG_USB_GADGET_MASS_STORAGE is not set
+# CONFIG_USB_MUSB is not set
+# CONFIG_VIDEO is not set
+# CONFIG_SOUND is not set
+CONFIG_MCI_SDHCI=y
+CONFIG_MCI=y
+
+#
+# --- Feature list ---
+#
+# CONFIG_MCI_STARTUP is not set
+CONFIG_MCI_INFO=y
+CONFIG_MCI_WRITE=y
+CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
+
+#
+# --- MCI host drivers ---
+#
+CONFIG_MCI_DW=y
+# CONFIG_MCI_DW_PIO is not set
+CONFIG_MCI_ROCKCHIP_DWCMSHC=y
+CONFIG_MCI_IMX_ESDHC=y
+# CONFIG_MCI_IMX_ESDHC_PIO is not set
+CONFIG_MCI_ARASAN=y
+# CONFIG_MCI_SPI is not set
+CONFIG_MCI_IMX_ESDHC_PBL=y
+CONFIG_HAVE_CLK=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMMON_CLK_GPIO=y
+
+#
+# Clocksource
+#
+CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
+CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
+# CONFIG_CLOCKSOURCE_DW_APB_TIMER is not set
+# end of Clocksource
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_ACT8846 is not set
+# CONFIG_MFD_DA9053 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_LP3972 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC34704 is not set
+# CONFIG_MFD_MC9SDZ60 is not set
+# CONFIG_MFD_STMPE is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_TWL4030 is not set
+# CONFIG_MFD_TWL6030 is not set
+CONFIG_RAVE_SP_CORE=y
+# CONFIG_MFD_STPMIC1 is not set
+# CONFIG_MFD_RN568PMIC is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
+CONFIG_MFD_RK808=y
+# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_ROHM_BD718XX is not set
+# end of Multifunction device drivers
+
+#
+# Misc devices
+#
+# CONFIG_JTAG is not set
+# CONFIG_SRAM is not set
+CONFIG_STATE_DRV=y
+CONFIG_DEV_MEM=y
+# CONFIG_UBOOTVAR is not set
+# CONFIG_STORAGE_BY_UUID is not set
+# end of Misc devices
+
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+# CONFIG_LED_GPIO_RGB is not set
+# CONFIG_LED_GPIO_BICOLOR is not set
+CONFIG_LED_TRIGGERS=y
+# CONFIG_LED_PCA955X is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT25=y
+CONFIG_EEPROM_AT24=y
+# end of EEPROM support
+
+#
+# Input device support
+#
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_IMX_KEYPAD is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_USB is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
+# end of Input device support
+
+CONFIG_WATCHDOG_IMX_RESET_SOURCE=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_POLLER is not set
+CONFIG_WATCHDOG_DW=y
+CONFIG_WATCHDOG_IMX=y
+CONFIG_RAVE_SP_WATCHDOG=y
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_PWM is not set
+# CONFIG_HWRNG is not set
+
+#
+# DMA support
+#
+# end of DMA support
+
+CONFIG_GPIOLIB=y
+
+#
+# GPIO
+#
+CONFIG_GPIO_GENERIC=y
+# CONFIG_GPIO_74164 is not set
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+CONFIG_GPIO_IMX=y
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_DESIGNWARE is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
+# end of GPIO
+
+# CONFIG_W1 is not set
+
+#
+# Pin controllers
+#
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX_IOMUX_V3=y
+CONFIG_PINCTRL_ROCKCHIP=y
+# CONFIG_PINCTRL_SINGLE is not set
+# end of Pin controllers
+
+CONFIG_NVMEM=y
+# CONFIG_NVMEM_RMEM is not set
+# CONFIG_NVMEM_SNVS_LPGPR is not set
+CONFIG_IMX_OCOTP=y
+# CONFIG_IMX_OCOTP_WRITE is not set
+CONFIG_RAVE_SP_EEPROM=y
+# CONFIG_EEPROM_93XX46 is not set
+
+#
+# Bus devices
+#
+# CONFIG_IMX_WEIM is not set
+# end of Bus devices
+
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED=y
+# CONFIG_REGULATOR_PFUZE is not set
+# CONFIG_REGULATOR_ANATOP is not set
+CONFIG_REGULATOR_RK808=y
+
+#
+# Remoteproc drivers
+#
+# CONFIG_REMOTEPROC is not set
+# end of Remoteproc drivers
+
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_IMX7=y
+CONFIG_HW_HAS_PCI=y
+
+#
+# PCI bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_IMX6 is not set
+# CONFIG_PCI_ECAM_GENERIC is not set
+# end of PCI bus options
+
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_ABRACON is not set
+# CONFIG_RTC_DRV_PCF85363 is not set
+# CONFIG_RTC_DRV_IMXDI is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# CONFIG_QEMU_FW_CFG is not set
+# end of Firmware Drivers
+
+#
+# FPGA Configuration Support
+#
+# CONFIG_FPGA is not set
+# end of FPGA Configuration Support
+
+CONFIG_GENERIC_PHY=y
+CONFIG_USB_NOP_XCEIV=y
+CONFIG_PHY_FSL_IMX8MQ_USB=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
+
+#
+# Hardware crypto devices
+#
+# CONFIG_FSL_CAAM_RNG_PBL_INIT is not set
+# end of Hardware crypto devices
+
+#
+# Memory controller drivers
+#
+# end of Memory controller drivers
+
+#
+# SoC drivers
+#
+
+#
+# i.MX SoC drivers
+#
+CONFIG_IMX_GPCV2_PM_DOMAINS=y
+CONFIG_IMX8M_FEATCTRL=y
+# end of i.MX SoC drivers
+
+#
+# KVX SoC drivers
+#
+# end of KVX SoC drivers
+
+#
+# Rockchip SoC drivers
+#
+# CONFIG_ROCKCHIP_IODOMAIN is not set
+# end of Rockchip SoC drivers
+# end of SoC drivers
+
+#
+# NVME Support
+#
+# end of NVME Support
+
+#
+# i.MX8M DDR controllers
+#
+CONFIG_IMX8M_DRAM=y
+# end of i.MX8M DDR controllers
+
+CONFIG_REBOOT_MODE=y
+CONFIG_SYSCON_REBOOT_MODE=y
+# CONFIG_NVMEM_REBOOT_MODE is not set
+# CONFIG_POWER_RESET_SYSCON is not set
+# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
+# CONFIG_POWER_RESET_GPIO is not set
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_VIRTIO_MENU is not set
+# end of Drivers
+
+#
+# Filesystem support
+#
+CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
+CONFIG_FS_AUTOMOUNT=y
+# CONFIG_FS_CRAMFS is not set
+CONFIG_FS_EXT4=y
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+# CONFIG_FS_JFFS2 is not set
+# CONFIG_FS_BPKFS is not set
+# CONFIG_FS_UIMAGEFS is not set
+# CONFIG_FS_PSTORE is not set
+# CONFIG_FS_SQUASHFS is not set
+
+#
+# ZLIB support disabled
+#
+
+#
+# LZ4 support disabled
+#
+
+#
+# LZO support disabled
+#
+
+#
+# XZ support disabled
+#
+
+#
+# ZSTD support disabled
+#
+CONFIG_FS_RATP=y
+# end of Filesystem support
+
+#
+# Library routines
+#
+CONFIG_PARAMETER=y
+CONFIG_UNCOMPRESS=y
+CONFIG_ZLIB=y
+# CONFIG_BZLIB is not set
+# CONFIG_LZ4_DECOMPRESS is not set
+# CONFIG_ZSTD_DECOMPRESS is not set
+# CONFIG_XZ_DECOMPRESS is not set
+# CONFIG_BASE64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_FNMATCH=y
+CONFIG_QSORT=y
+CONFIG_IMAGE_SPARSE=y
+CONFIG_RATP=y
+# CONFIG_ALLOW_PRNG_FALLBACK is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC8 is not set
+
+#
+# Library gui routines
+#
+# end of Library gui routines
+
+CONFIG_PRINTF_UUID=y
+CONFIG_NLS=y
+# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+CONFIG_ARCH_HAS_ZERO_PAGE=y
+# end of Library routines
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_CRC_ITU_T=y
+CONFIG_DIGEST=y
+CONFIG_HAVE_DIGEST_MD5=y
+CONFIG_HAVE_DIGEST_SHA1=y
+CONFIG_DIGEST_CRC32_GENERIC=y
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# end of Crypto support
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_FIRMWARE_IMX_LPDDR4_PMU_TRAIN=y
+CONFIG_FIRMWARE_IMX8MM_ATF=y
+CONFIG_FIRMWARE_IMX8MP_ATF=y
+CONFIG_FIRMWARE_IMX8MQ_ATF=y
+# end of Firmware files
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
+CONFIG_ARCH_IMX_USBLOADER=y
+CONFIG_RK_IMAGE=y
+CONFIG_RK_USB_LOADER=y
+# end of Host Tools
+
+#
+# Target Tools
+#
+# CONFIG_IMD_TARGET is not set
+CONFIG_KERNEL_INSTALL_TARGET=y
+# CONFIG_BAREBOXENV_TARGET is not set
+CONFIG_BAREBOXCRC32_TARGET=y
+# CONFIG_MVEBU_KWBOOT_TARGET is not set
+# end of Target Tools
+
+# CONFIG_TEST is not set
diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
index 98e5840760a8..7630dfdfb889 100644
--- a/configs/platform-v8a/platformconfig
+++ b/configs/platform-v8a/platformconfig
@@ -19,6 +19,7 @@ PTXCONF_PLATFORM="v8a"
PTXCONF_PLATFORM_VERSION="-${PTXDIST_BSP_AUTOVERSION}"
PTXCONF_RUNTIME=y
PTXCONF_BUILDTIME=y
+PTXCONF_VIRTUAL=y
PTXCONF_PLATFORMCONFIG_VERSION="2023.05.0"
#
@@ -178,7 +179,31 @@ PTXCONF_CONSOLE_SPEED="115200"
PTXCONF_BAREBOX_IMX8M=y
PTXCONF_BAREBOX_ROCKCHIP=y
PTXCONF_BAREBOX_ARCH_STRING="arm"
-# PTXCONF_BAREBOX is not set
+PTXCONF_BAREBOX_DEPENDENCIES=y
+PTXCONF_BAREBOX=y
+PTXCONF_BAREBOX_VERSION="2023.05.0"
+PTXCONF_BAREBOX_CONFIG_BUILDSYSTEM_VERSION=y
+PTXCONF_BAREBOX_BUILDSYSTEM_VERSION="${PTXDIST_VCS_VERSION}"
+PTXCONF_BAREBOX_MD5="35a6a96f00df2a3f596efdc5d2459cb5"
+PTXCONF_BAREBOX_CONFIG="barebox.config"
+PTXCONF_BAREBOX_FIRMWARE=y
+PTXCONF_BAREBOX_EXTRA_ENV=y
+PTXCONF_BAREBOX_EXTRA_ENV_PATH="barebox-common-defaultenv"
+# PTXCONF_BAREBOX_BAREBOXENV is not set
+# PTXCONF_BAREBOX_INSTALL_DTBS is not set
+# PTXCONF_BAREBOX_BAREBOXCRC32 is not set
+# PTXCONF_BAREBOX_KERNEL_INSTALL is not set
+# PTXCONF_BAREBOX_BAREBOXIMD is not set
+
+#
+# build dependencies
+#
+PTXCONF_BAREBOX_NEEDS_HOST_LIBUSB=y
+PTXCONF_BAREBOX_NEEDS_HOST_OPENSSL=y
+# PTXCONF_BAREBOX_NEEDS_HOST_IMX_CST is not set
+# PTXCONF_BAREBOX_NEEDS_KEYS is not set
+PTXCONF_BAREBOX_NEEDS_HOST_LZOP=y
+PTXCONF_BAREBOX_NEEDS_HOST_LZ4=y
# PTXCONF_BAREBOX_MLO is not set
PTXCONF_BOOTLOADER=y
# PTXCONF_GRUB is not set
@@ -272,6 +297,7 @@ PTXCONF_HOST_LIBCONFUSE=y
PTXCONF_HOST_LIBKMOD=y
PTXCONF_HOST_LIBLZO=y
PTXCONF_HOST_LIBUSB=y
+PTXCONF_HOST_LZ4=y
PTXCONF_HOST_LZOP=y
PTXCONF_HOST_M4=y
PTXCONF_HOST_OPENSSL=y
diff --git a/configs/platform-v8a/rules/firmware-imx.in b/configs/platform-v8a/rules/firmware-imx.in
index 831f6720e386..5f06a44416fa 100644
--- a/configs/platform-v8a/rules/firmware-imx.in
+++ b/configs/platform-v8a/rules/firmware-imx.in
@@ -7,6 +7,10 @@ menuconfig FIRMWARE_IMX
help
Install CODA VPU firmware files from the firmware-imx package.
+config BAREBOX_DEPENDENCIES
+ tristate
+ select FIRMWARE_IMX
+
if FIRMWARE_IMX
config FIRMWARE_IMX_VPU_IMX27
diff --git a/configs/platform-v8a/rules/firmware-rockchip.in b/configs/platform-v8a/rules/firmware-rockchip.in
index aa702416df00..08b89f1af944 100644
--- a/configs/platform-v8a/rules/firmware-rockchip.in
+++ b/configs/platform-v8a/rules/firmware-rockchip.in
@@ -6,6 +6,10 @@ menuconfig FIRMWARE_ROCKCHIP
help
Rockchip prebuilt SDRAM initialization and TF-A binaries.
+config BAREBOX_DEPENDENCIES
+ tristate
+ select FIRMWARE_ROCKCHIP
+
if FIRMWARE_ROCKCHIP
config FIRMWARE_ROCKCHIP_RK3566_SDRAM
diff --git a/configs/platform-v8a/rules/post/barebox-fixup.make b/configs/platform-v8a/rules/post/barebox-fixup.make
new file mode 100644
index 000000000000..7c4ce40420ad
--- /dev/null
+++ b/configs/platform-v8a/rules/post/barebox-fixup.make
@@ -0,0 +1,16 @@
+# Firmware blobs for Rockchip platforms
+BAREBOX_INJECT_FILES += rk3568_bl31_v1.24.elf:firmware/rk3568-bl31.bin
+BAREBOX_INJECT_FILES += rk3568_bl32_v1.05.bin:firmware/rk3568-op-tee.bin
+BAREBOX_INJECT_FILES += rk3568_ddr_1560MHz_v1.08.bin:arch/arm/boards/rockchip-rk3568-evb/sdram-init.bin
+BAREBOX_INJECT_FILES += rk3568_ddr_1560MHz_v1.08.bin:arch/arm/boards/radxa-rock3/sdram-init.bin
+BAREBOX_PROGS_HOST += rk-usb-loader
+
+# Firmware blobs for NXP i.MX8M platforms
+BAREBOX_INJECT_FILES += imx8mm-bl31.bin:firmware/imx8mm-bl31.bin
+BAREBOX_INJECT_FILES += imx8mp-bl31.bin:firmware/imx8mp-bl31.bin
+BAREBOX_INJECT_FILES += imx8mq-bl31.bin:firmware/imx8mq-bl31.bin
+BAREBOX_INJECT_FILES += ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin:firmware/lpddr4_pmu_train_1d_dmem.bin
+BAREBOX_INJECT_FILES += ddr/synopsys/lpddr4_pmu_train_1d_imem.bin:firmware/lpddr4_pmu_train_1d_imem.bin
+BAREBOX_INJECT_FILES += ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin:firmware/lpddr4_pmu_train_2d_dmem.bin
+BAREBOX_INJECT_FILES += ddr/synopsys/lpddr4_pmu_train_2d_imem.bin:firmware/lpddr4_pmu_train_2d_imem.bin
+BAREBOX_PROGS_HOST += imx/imx-usb-loader
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [DistroKit] [PATCH v3 7/8] v8a: barebox: switch to upstream rule
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
` (5 preceding siblings ...)
2023-05-31 11:47 ` [DistroKit] [PATCH v3 6/8] v8a: barebox: configure upstream barebox rule for both imx8m and rockchip Ahmad Fatoum
@ 2023-05-31 11:47 ` Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 8/8] v8a: barebox: remove left-over SoC-specific rules Ahmad Fatoum
2023-05-31 12:02 ` [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Robert Schwebel
8 siblings, 0 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
Now that we have configured the upstream rule to support both i.MX8M and
Rockchip, let's wire it into the image rules.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
configs/platform-v8a/config/images/imx8mm-evk.config | 2 +-
configs/platform-v8a/config/images/imx8mp-evk.config | 2 +-
configs/platform-v8a/config/images/imx8mq-evk.config | 2 +-
configs/platform-v8a/config/images/rock3a.config | 6 +++---
configs/platform-v8a/platforms/image-imx8mm-evk.in | 2 +-
configs/platform-v8a/platforms/image-imx8mp-evk.in | 2 +-
configs/platform-v8a/platforms/image-imx8mq-evk.in | 2 +-
configs/platform-v8a/platforms/image-rock3a.in | 2 +-
doc/hardware_v8a_rock3a.rst | 2 +-
9 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/configs/platform-v8a/config/images/imx8mm-evk.config b/configs/platform-v8a/config/images/imx8mm-evk.config
index 5c04b6c36405..80f569139704 100644
--- a/configs/platform-v8a/config/images/imx8mm-evk.config
+++ b/configs/platform-v8a/config/images/imx8mm-evk.config
@@ -4,7 +4,7 @@ image @IMAGE@ {
disk-signature = 0x9e1b14a8
}
partition barebox {
- image = "barebox-nxp-imx8mm-evk.img-imx8m"
+ image = "barebox-nxp-imx8mm-evk.img"
size = 896K
in-partition-table = false
holes = {"(440; 1K)"}
diff --git a/configs/platform-v8a/config/images/imx8mp-evk.config b/configs/platform-v8a/config/images/imx8mp-evk.config
index 99b921023470..2f019381cace 100644
--- a/configs/platform-v8a/config/images/imx8mp-evk.config
+++ b/configs/platform-v8a/config/images/imx8mp-evk.config
@@ -4,7 +4,7 @@ image @IMAGE@ {
disk-signature = 0x9e1b14a8
}
partition barebox {
- image = "barebox-nxp-imx8mp-evk.img-imx8m"
+ image = "barebox-nxp-imx8mp-evk.img"
size = 896K
in-partition-table = false
holes = {"(440; 1K)"}
diff --git a/configs/platform-v8a/config/images/imx8mq-evk.config b/configs/platform-v8a/config/images/imx8mq-evk.config
index 5932688360d9..385672543b90 100644
--- a/configs/platform-v8a/config/images/imx8mq-evk.config
+++ b/configs/platform-v8a/config/images/imx8mq-evk.config
@@ -4,7 +4,7 @@ image @IMAGE@ {
disk-signature = 0x9e1b14a8
}
partition barebox {
- image = "barebox-nxp-imx8mq-evk.img-imx8m"
+ image = "barebox-nxp-imx8mq-evk.img"
size = 896K
in-partition-table = false
holes = {"(440; 1K)"}
diff --git a/configs/platform-v8a/config/images/rock3a.config b/configs/platform-v8a/config/images/rock3a.config
index 8b78ce7df4e7..522d82cdc9c9 100644
--- a/configs/platform-v8a/config/images/rock3a.config
+++ b/configs/platform-v8a/config/images/rock3a.config
@@ -7,13 +7,13 @@ image @IMAGE@ {
offset = 32k
size = 2M
in-partition-table = false
- image = "barebox-rock3a.img-rockchip"
+ image = "barebox-rock3a.img"
}
partition boot2 {
offset = 2080k
size = 2M
in-partition-table = false
- image = "barebox-rock3a.img-rockchip"
+ image = "barebox-rock3a.img"
}
partition barebox_environment {
offset = 4128k
@@ -41,6 +41,6 @@ image barebox-rock3a.norimg {
offset = 32k
size = 2M
in-partition-table = false
- image = "barebox-rock3a.img-rockchip"
+ image = "barebox-rock3a.img"
}
}
diff --git a/configs/platform-v8a/platforms/image-imx8mm-evk.in b/configs/platform-v8a/platforms/image-imx8mm-evk.in
index 50907881b913..f58a27b0bb64 100644
--- a/configs/platform-v8a/platforms/image-imx8mm-evk.in
+++ b/configs/platform-v8a/platforms/image-imx8mm-evk.in
@@ -4,7 +4,7 @@ config IMAGE_IMX8MM_EVK
tristate
select HOST_GENIMAGE
select IMAGE_ROOT_EXT
- select BAREBOX_IMX8M
+ select BAREBOX
prompt "Generate images/imx8mm-evk.img"
help
Generate a bootable SD card image to deploy a NXP i.MX8MM-EVK board.
diff --git a/configs/platform-v8a/platforms/image-imx8mp-evk.in b/configs/platform-v8a/platforms/image-imx8mp-evk.in
index d49ce8d3da4c..87ad83368a19 100644
--- a/configs/platform-v8a/platforms/image-imx8mp-evk.in
+++ b/configs/platform-v8a/platforms/image-imx8mp-evk.in
@@ -4,7 +4,7 @@ config IMAGE_IMX8MP_EVK
tristate
select HOST_GENIMAGE
select IMAGE_ROOT_EXT
- select BAREBOX_IMX8M
+ select BAREBOX
prompt "Generate images/imx8mp-evk.img"
help
Generate a bootable SD card image to deploy a NXP i.MX8MP-EVK board.
diff --git a/configs/platform-v8a/platforms/image-imx8mq-evk.in b/configs/platform-v8a/platforms/image-imx8mq-evk.in
index a286e6bf575f..254879ae5cb7 100644
--- a/configs/platform-v8a/platforms/image-imx8mq-evk.in
+++ b/configs/platform-v8a/platforms/image-imx8mq-evk.in
@@ -4,7 +4,7 @@ config IMAGE_IMX8MQ_EVK
tristate
select HOST_GENIMAGE
select IMAGE_ROOT_EXT
- select BAREBOX_IMX8M
+ select BAREBOX
prompt "Generate images/imx8mq-evk.img"
help
Generate a bootable SD card image to deploy a NXP i.MX8MQ-EVK board.
diff --git a/configs/platform-v8a/platforms/image-rock3a.in b/configs/platform-v8a/platforms/image-rock3a.in
index cd09d1ec9087..96393cfc3257 100644
--- a/configs/platform-v8a/platforms/image-rock3a.in
+++ b/configs/platform-v8a/platforms/image-rock3a.in
@@ -4,7 +4,7 @@ config IMAGE_ROCK3A
tristate
select HOST_GENIMAGE
select IMAGE_ROOT_EXT
- select BAREBOX_ROCKCHIP
+ select BAREBOX
prompt "Generate images/rock3a.img"
help
Generate an image for the Radxa ROCK3 Model A.
diff --git a/doc/hardware_v8a_rock3a.rst b/doc/hardware_v8a_rock3a.rst
index 3aa5a62ea8bd..72eb9d8b6c70 100644
--- a/doc/hardware_v8a_rock3a.rst
+++ b/doc/hardware_v8a_rock3a.rst
@@ -17,7 +17,7 @@ Barebox via USB:
.. code-block:: shell
- platform-v8a/sysroot-host/bin/rk-usb-loader platform-v8a/images/barebox-rock3a.img-rockchip
+ platform-v8a/sysroot-host/bin/rk-usb-loader platform-v8a/images/barebox-rock3a.img
Once Barebox is booted, copy the image ``platform-v8a/images/rock3a.img`` via
tftp or NFS to the eMMC to persist it. Disable MASKROM mode and reboot the
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [DistroKit] [PATCH v3 8/8] v8a: barebox: remove left-over SoC-specific rules
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
` (6 preceding siblings ...)
2023-05-31 11:47 ` [DistroKit] [PATCH v3 7/8] v8a: barebox: switch to upstream rule Ahmad Fatoum
@ 2023-05-31 11:47 ` Ahmad Fatoum
2023-05-31 12:02 ` [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Robert Schwebel
8 siblings, 0 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-05-31 11:47 UTC (permalink / raw)
To: distrokit; +Cc: Ahmad Fatoum
With the switch to the upstream rules, we have no need any longer for
the SoC-specific ones, so let's drop them.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
configs/platform-v8a/barebox-imx8m.config | 1024 -----------------
configs/platform-v8a/barebox-rockchip.config | 925 ---------------
configs/platform-v8a/platformconfig | 2 -
.../platform-v8a/platforms/barebox-imx8m.in | 10 -
.../platforms/barebox-rockchip.in | 14 -
configs/platform-v8a/rules/barebox-imx8m.make | 125 --
.../platform-v8a/rules/barebox-rockchip.make | 163 ---
7 files changed, 2263 deletions(-)
delete mode 100644 configs/platform-v8a/barebox-imx8m.config
delete mode 100644 configs/platform-v8a/barebox-rockchip.config
delete mode 100644 configs/platform-v8a/platforms/barebox-imx8m.in
delete mode 100644 configs/platform-v8a/platforms/barebox-rockchip.in
delete mode 100644 configs/platform-v8a/rules/barebox-imx8m.make
delete mode 100644 configs/platform-v8a/rules/barebox-rockchip.make
diff --git a/configs/platform-v8a/barebox-imx8m.config b/configs/platform-v8a/barebox-imx8m.config
deleted file mode 100644
index 1fe5703d9865..000000000000
--- a/configs/platform-v8a/barebox-imx8m.config
+++ /dev/null
@@ -1,1024 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.05.0 Configuration
-#
-CONFIG_ARM=y
-CONFIG_ARM_LINUX=y
-CONFIG_ARM_USE_COMPRESSED_DTB=y
-CONFIG_TEXT_BASE=0x0
-
-#
-# System Type
-#
-CONFIG_ARCH_MULTIARCH=y
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_ARM64_VIRT is not set
-# CONFIG_ARCH_BCM283X is not set
-CONFIG_ARCH_IMX=y
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_ZYNQMP is not set
-
-#
-# Processor Type
-#
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_64=y
-CONFIG_CPU_V8=y
-CONFIG_CPU_64v8=y
-
-#
-# processor features
-#
-# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
-CONFIG_ARCH_IMX_IMXIMAGE=y
-
-#
-# i.MX boards
-#
-CONFIG_ARCH_IMX8M=y
-CONFIG_ARCH_IMX8MM=y
-CONFIG_ARCH_IMX8MP=y
-CONFIG_ARCH_IMX8MQ=y
-
-#
-# i.MX8M boards
-#
-# CONFIG_MACH_INNOCOMM_WB15 is not set
-# CONFIG_MACH_MNT_REFORM is not set
-CONFIG_MACH_NXP_IMX8MM_EVK=y
-# CONFIG_MACH_NXP_IMX8MN_EVK is not set
-CONFIG_MACH_NXP_IMX8MP_EVK=y
-CONFIG_MACH_NXP_IMX8MQ_EVK=y
-CONFIG_MACH_PHYTEC_SOM_IMX8MQ=y
-# CONFIG_MACH_POLYHEX_DEBIX is not set
-# CONFIG_MACH_PROTONIC_IMX8M is not set
-# CONFIG_MACH_TQ_MBA8MPXL is not set
-# CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP is not set
-# CONFIG_MACH_ZII_IMX8MQ_DEV is not set
-# end of i.MX boards
-
-#
-# i.MX specific settings
-#
-# CONFIG_IMX_IIM is not set
-CONFIG_IMX_SAVE_BOOTROM_LOG=y
-# CONFIG_HABV4 is not set
-# end of i.MX specific settings
-
-# CONFIG_BOARD_ARM_GENERIC_DT is not set
-# end of System Type
-
-CONFIG_64BIT=y
-
-#
-# ARM specific settings
-#
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_EXCEPTIONS=y
-CONFIG_ARM_SMCCC=y
-# CONFIG_ARM_PSCI_CLIENT is not set
-# end of ARM specific settings
-
-CONFIG_GREGORIAN_CALENDER=y
-CONFIG_HAS_KALLSYMS=y
-CONFIG_HAS_CACHE=y
-CONFIG_HAS_DMA=y
-CONFIG_ARCH_HAS_SJLJ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_BLOCK=y
-CONFIG_BLOCK_WRITE=y
-CONFIG_FILETYPE=y
-CONFIG_BINFMT=y
-CONFIG_UIMAGE=y
-CONFIG_LOGBUF=y
-CONFIG_STDDEV=y
-CONFIG_MENUTREE=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_USBGADGET_START=y
-CONFIG_BOOT=y
-CONFIG_FASTBOOT_BASE=y
-
-#
-# General Settings
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_BANNER=y
-CONFIG_MEMINFO=y
-CONFIG_ENVIRONMENT_VARIABLES=y
-CONFIG_GLOBALVAR=y
-CONFIG_NVVAR=y
-
-#
-# memory layout
-#
-CONFIG_HAVE_PBL_IMAGE=y
-CONFIG_HAVE_PBL_MULTI_IMAGES=y
-CONFIG_HAVE_IMAGE_COMPRESSION=y
-CONFIG_PBL_IMAGE=y
-CONFIG_PBL_MULTI_IMAGES=y
-CONFIG_USE_COMPRESSED_DTB=y
-CONFIG_PBL_RELOCATABLE=y
-CONFIG_IMAGE_COMPRESSION=y
-# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
-CONFIG_IMAGE_COMPRESSION_LZO=y
-# CONFIG_IMAGE_COMPRESSION_GZIP is not set
-# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
-# CONFIG_IMAGE_COMPRESSION_NONE is not set
-CONFIG_MMU=y
-CONFIG_MMU_EARLY=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
-CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
-CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
-CONFIG_STACK_SIZE=0x8000
-CONFIG_MALLOC_SIZE=0x0
-# end of memory layout
-
-# CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_RELOCATABLE=y
-# CONFIG_PANIC_HANG is not set
-CONFIG_PROMPT="barebox:"
-CONFIG_BAUDRATE=115200
-CONFIG_CBSIZE=1024
-CONFIG_SHELL_HUSH=y
-# CONFIG_SHELL_SIMPLE is not set
-# CONFIG_SHELL_NONE is not set
-CONFIG_GLOB=y
-CONFIG_GLOB_SORT=y
-CONFIG_PROMPT_HUSH_PS2="> "
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
-CONFIG_DYNAMIC_CRC_TABLE=y
-CONFIG_ERRNO_MESSAGES=y
-CONFIG_TIMESTAMP=y
-CONFIG_BOOTM=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-# CONFIG_BOOTM_AIMAGE is not set
-# CONFIG_BOOTM_ELF is not set
-# CONFIG_BOOTM_FITIMAGE is not set
-CONFIG_BLSPEC=y
-CONFIG_FLEXIBLE_BOOTARGS=y
-CONFIG_MMCBLKDEV_ROOTARG=y
-CONFIG_BAREBOX_UPDATE=y
-CONFIG_SYSTEM_PARTITIONS=y
-CONFIG_IMD=y
-CONFIG_CONSOLE_FULL=y
-# CONFIG_CONSOLE_SIMPLE is not set
-# CONFIG_CONSOLE_NONE is not set
-# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
-# CONFIG_CONSOLE_ACTIVATE_ALL is not set
-CONFIG_CONSOLE_ACTIVATE_NONE=y
-# CONFIG_CONSOLE_ALLOW_COLOR is not set
-# CONFIG_CONSOLE_DISABLE_INPUT is not set
-CONFIG_PBL_CONSOLE=y
-CONFIG_CONSOLE_RATP=y
-# CONFIG_RATP_CMD_I2C is not set
-# CONFIG_RATP_CMD_GPIO is not set
-CONFIG_PARTITION=y
-CONFIG_PARTITION_DISK=y
-CONFIG_PARTITION_DISK_DOS=y
-CONFIG_PARTITION_DISK_EFI=y
-CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
-CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
-CONFIG_ENV_HANDLING=y
-CONFIG_DEFAULT_ENVIRONMENT=y
-CONFIG_DEFAULT_COMPRESSION_NONE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_REBOOT_MODE=y
-# CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG is not set
-CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
-CONFIG_HAS_SCHED=y
-CONFIG_POLLER=y
-CONFIG_BTHREAD=y
-# CONFIG_STATE is not set
-# CONFIG_BOOTCHOOSER is not set
-CONFIG_RESET_SOURCE=y
-# CONFIG_SYSTEMD_OF_WATCHDOG is not set
-CONFIG_EXTERNAL_DTS_FRAGMENTS=""
-
-#
-# OP-TEE loading
-#
-# CONFIG_BOOTM_OPTEE is not set
-# CONFIG_PBL_OPTEE is not set
-# end of OP-TEE loading
-
-#
-# Android Fastboot
-#
-CONFIG_FASTBOOT_SPARSE=y
-CONFIG_FASTBOOT_CMD_OEM=y
-# end of Android Fastboot
-# end of General Settings
-
-#
-# Debugging
-#
-CONFIG_COMPILE_LOGLEVEL=6
-CONFIG_DEFAULT_LOGLEVEL=7
-# CONFIG_DEBUG_LL is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_IMX_UART_PORT=1
-# CONFIG_DEBUG_INITCALLS is not set
-# CONFIG_DEBUG_PBL is not set
-# CONFIG_DEBUG_PROBES is not set
-# CONFIG_PBL_BREAK is not set
-# CONFIG_PRINTF_FULL is not set
-# CONFIG_UBSAN is not set
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-# CONFIG_KASAN is not set
-# CONFIG_COMPILE_TEST is not set
-# end of Debugging
-
-#
-# EFI (Extensible Firmware Interface) Support
-#
-# end of EFI (Extensible Firmware Interface) Support
-
-CONFIG_HAS_DEBUG_LL=y
-CONFIG_COMMAND_SUPPORT=y
-CONFIG_COMPILE_HASH=y
-
-#
-# Commands
-#
-
-#
-# Information
-#
-# CONFIG_CMD_TUTORIAL is not set
-CONFIG_CMD_ARM_CPUINFO=y
-CONFIG_CMD_BOOTROM=y
-CONFIG_CMD_DEVINFO=y
-# CONFIG_CMD_DEVLOOKUP is not set
-# CONFIG_CMD_DEVUNBIND is not set
-CONFIG_CMD_DMESG=y
-CONFIG_CMD_DRVINFO=y
-CONFIG_CMD_HELP=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_IMD=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_REGULATOR=y
-# CONFIG_CMD_PM_DOMAIN is not set
-# CONFIG_CMD_NVMEM is not set
-CONFIG_CMD_VERSION=y
-# CONFIG_CMD_MMC is not set
-CONFIG_CMD_MMC_EXTCSD=y
-# CONFIG_CMD_POLLER is not set
-# CONFIG_CMD_BTHREAD is not set
-# CONFIG_CMD_SLICE is not set
-# end of Information
-
-#
-# Boot
-#
-CONFIG_CMD_BOOT=y
-CONFIG_CMD_BOOTM=y
-CONFIG_CMD_GO=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_LOADY is not set
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-# end of Boot
-
-#
-# Partition
-#
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_AUTOMOUNT=y
-CONFIG_CMD_MOUNT=y
-CONFIG_CMD_UMOUNT=y
-# end of Partition
-
-#
-# Environment
-#
-CONFIG_CMD_NV=y
-CONFIG_CMD_EXPORT=y
-# CONFIG_CMD_DEFAULTENV is not set
-CONFIG_CMD_GLOBAL=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_SETENV=y
-# end of Environment
-
-#
-# File
-#
-CONFIG_CMD_BASENAME=y
-CONFIG_CMD_CAT=y
-CONFIG_CMD_CD=y
-CONFIG_CMD_CP=y
-# CONFIG_CMD_CMP is not set
-CONFIG_CMD_DIGEST=y
-CONFIG_CMD_DIRNAME=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_LS=y
-# CONFIG_CMD_STAT is not set
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_MKDIR=y
-CONFIG_CMD_PWD=y
-CONFIG_CMD_READLINK=y
-CONFIG_CMD_RM=y
-CONFIG_CMD_RMDIR=y
-# CONFIG_CMD_SHA1SUM is not set
-# CONFIG_CMD_SHA224SUM is not set
-# CONFIG_CMD_SHA256SUM is not set
-# CONFIG_CMD_SHA384SUM is not set
-# CONFIG_CMD_SHA512SUM is not set
-CONFIG_CMD_UNCOMPRESS=y
-# end of File
-
-#
-# Shell scripting
-#
-CONFIG_CMD_FALSE=y
-CONFIG_CMD_GETOPT=y
-CONFIG_CMD_LET=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_READF=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_TEST=y
-CONFIG_CMD_TRUE=y
-# end of Shell scripting
-
-#
-# Network
-#
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_HOST=y
-CONFIG_NET_CMD_IFUP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-# CONFIG_CMD_TFTP is not set
-CONFIG_CMD_IP_ROUTE_GET=y
-# CONFIG_CMD_ETHLOG is not set
-# end of Network
-
-#
-# Console and Framebuffer interaction
-#
-CONFIG_CMD_CLEAR=y
-CONFIG_CMD_ECHO=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
-CONFIG_CMD_MENU=y
-CONFIG_CMD_MENU_MANAGEMENT=y
-CONFIG_CMD_MENUTREE=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-# end of Console and Framebuffer interaction
-
-#
-# Memory
-#
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_MD=y
-CONFIG_CMD_MEMCMP=y
-CONFIG_CMD_MEMCPY=y
-CONFIG_CMD_MEMSET=y
-CONFIG_CMD_MEMTEST=y
-# CONFIG_CMD_MEMTESTER is not set
-CONFIG_CMD_MM=y
-CONFIG_CMD_MW=y
-# end of Memory
-
-#
-# Hardware manipulation
-#
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_HWCLOCK=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_LED=y
-# CONFIG_CMD_POWEROFF is not set
-# CONFIG_CMD_SMC is not set
-CONFIG_CMD_SPI=y
-CONFIG_CMD_LED_TRIGGER=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USBGADGET=y
-CONFIG_CMD_WD=y
-CONFIG_CMD_WD_DEFAULT_TIMOUT=0
-# end of Hardware manipulation
-
-#
-# Miscellaneous
-#
-# CONFIG_CMD_2048 is not set
-CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
-# CONFIG_CMD_FIRMWARELOAD is not set
-# CONFIG_CMD_OF_DIFF is not set
-CONFIG_CMD_OF_DUMP=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_OF_PROPERTY=y
-# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
-# CONFIG_CMD_OF_FIXUP_STATUS is not set
-# CONFIG_CMD_OF_OVERLAY is not set
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_UPTIME is not set
-# CONFIG_CMD_DHRYSTONE is not set
-# CONFIG_CMD_SPD_DECODE is not set
-# CONFIG_CMD_SEED is not set
-# end of Miscellaneous
-# end of Commands
-
-CONFIG_NET=y
-# CONFIG_NET_NFS is not set
-CONFIG_NET_NETCONSOLE=y
-CONFIG_NET_RESOLV=y
-CONFIG_NET_IFUP=y
-CONFIG_NET_DHCP=y
-# CONFIG_NET_SNTP is not set
-CONFIG_NET_FASTBOOT=y
-
-#
-# Drivers
-#
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_FEATURE_CONTROLLER=y
-CONFIG_OFTREE=y
-CONFIG_OFTREE_MEM_GENERIC=y
-CONFIG_DTC=y
-CONFIG_OFDEVICE=y
-CONFIG_FEATURE_CONTROLLER_FIXUP=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_BAREBOX_DRIVERS=y
-# CONFIG_OF_BAREBOX_ENV_IN_FS is not set
-# CONFIG_OF_OVERLAY is not set
-# CONFIG_AIODEV is not set
-
-#
-# serial drivers
-#
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_DRIVER_SERIAL_IMX=y
-# CONFIG_DRIVER_SERIAL_NS16550 is not set
-# CONFIG_DRIVER_SERIAL_CADENCE is not set
-# CONFIG_SERIAL_SIFIVE is not set
-# end of serial drivers
-
-CONFIG_ARCH_HAS_FEC_IMX=y
-CONFIG_PHYLIB=y
-
-#
-# Network drivers
-#
-# CONFIG_DRIVER_NET_BCMGENET is not set
-# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
-CONFIG_DRIVER_NET_DESIGNWARE_EQOS=y
-CONFIG_DRIVER_NET_DESIGNWARE_IMX8=y
-# CONFIG_DRIVER_NET_ENC28J60 is not set
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_DRIVER_NET_FSL_FMAN is not set
-# CONFIG_DRIVER_NET_KS8851_MLL is not set
-# CONFIG_DRIVER_NET_MICREL is not set
-# CONFIG_DRIVER_NET_SMC911X is not set
-# CONFIG_DRIVER_NET_SMC91111 is not set
-# CONFIG_DRIVER_NET_LITEETH is not set
-
-#
-# phylib
-#
-
-#
-# MII PHY device drivers
-#
-# CONFIG_AR8327N_PHY is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-CONFIG_DP83867_PHY=y
-# CONFIG_DP83TD510_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-CONFIG_MICREL_PHY=y
-# CONFIG_NATIONAL_PHY is not set
-CONFIG_REALTEK_PHY=y
-# CONFIG_SMSC_PHY is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-
-#
-# MII bus device drivers
-#
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_GPIO=y
-# end of phylib
-
-CONFIG_NET_USB=y
-CONFIG_NET_USB_ASIX=y
-# CONFIG_USB_NET_AX88179_178A is not set
-CONFIG_NET_USB_SMSC95XX=y
-# CONFIG_NET_USB_RTL8152 is not set
-# CONFIG_DSA is not set
-# end of Network drivers
-
-#
-# SPI drivers
-#
-CONFIG_SPI=y
-CONFIG_SPI_MEM=y
-# CONFIG_DRIVER_SPI_FSL_QUADSPI is not set
-# CONFIG_DRIVER_SPI_GPIO is not set
-CONFIG_DRIVER_SPI_IMX=y
-CONFIG_DRIVER_SPI_IMX_2_3=y
-# CONFIG_DRIVER_SPI_LITEX_SPIFLASH is not set
-# CONFIG_SPI_NXP_FLEXSPI is not set
-# end of SPI drivers
-
-CONFIG_I2C=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_IMX=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_MV64XXX is not set
-# end of I2C Hardware Bus support
-
-# CONFIG_I2C_MUX is not set
-CONFIG_I2C_IMX_EARLY=y
-CONFIG_MTD=y
-CONFIG_MTD_WRITE=y
-CONFIG_MTD_OOB_DEVICE=y
-# CONFIG_MTD_RAW_DEVICE is not set
-# CONFIG_MTD_CONCAT is not set
-
-#
-# MTD debug options
-#
-# CONFIG_MTD_PEB_DEBUG is not set
-
-#
-# Self contained MTD devices
-#
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_DOCG3 is not set
-# CONFIG_MTD_MTDRAM is not set
-# end of Self contained MTD devices
-
-# CONFIG_DRIVER_CFI is not set
-# CONFIG_NAND is not set
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_MTD_UBI is not set
-CONFIG_DISK=y
-CONFIG_DISK_WRITE=y
-
-#
-# drive types
-#
-# CONFIG_DISK_ATA is not set
-# CONFIG_DISK_AHCI is not set
-
-#
-# interface types
-#
-# CONFIG_DISK_INTF_PLATFORM_IDE is not set
-CONFIG_USB=y
-CONFIG_USB_HOST=y
-CONFIG_USB_IMX_CHIPIDEA=y
-CONFIG_USB_IMX_CHIPIDEA_USBMISC=y
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_GADGET is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_EHCI is not set
-# CONFIG_USB_XHCI is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_USB_OTGDEV=y
-CONFIG_USB_STORAGE=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_ONBOARD_HUB is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DRIVER_ARC_PBL=y
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_GADGET_DRIVER_ARC=y
-CONFIG_USB_GADGET_AUTOSTART=y
-
-#
-# USB Gadget drivers
-#
-# CONFIG_USB_GADGET_DFU is not set
-CONFIG_USB_GADGET_SERIAL=y
-CONFIG_USB_GADGET_FASTBOOT=y
-# CONFIG_USB_GADGET_MASS_STORAGE is not set
-# CONFIG_USB_MUSB is not set
-# CONFIG_VIDEO is not set
-# CONFIG_SOUND is not set
-CONFIG_MCI_SDHCI=y
-CONFIG_MCI=y
-
-#
-# --- Feature list ---
-#
-# CONFIG_MCI_STARTUP is not set
-CONFIG_MCI_INFO=y
-CONFIG_MCI_WRITE=y
-CONFIG_MCI_MMC_BOOT_PARTITIONS=y
-# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
-
-#
-# --- MCI host drivers ---
-#
-# CONFIG_MCI_DW is not set
-# CONFIG_MCI_ROCKCHIP_DWCMSHC is not set
-CONFIG_MCI_IMX_ESDHC=y
-# CONFIG_MCI_IMX_ESDHC_PIO is not set
-# CONFIG_MCI_ARASAN is not set
-# CONFIG_MCI_SPI is not set
-CONFIG_MCI_IMX_ESDHC_PBL=y
-CONFIG_HAVE_CLK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_OF_PROVIDER=y
-CONFIG_COMMON_CLK_GPIO=y
-
-#
-# Clocksource
-#
-CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
-CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
-# CONFIG_CLOCKSOURCE_DW_APB_TIMER is not set
-# end of Clocksource
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_ACT8846 is not set
-# CONFIG_MFD_DA9053 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_LP3972 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC34704 is not set
-# CONFIG_MFD_MC9SDZ60 is not set
-# CONFIG_MFD_STMPE is not set
-CONFIG_MFD_SYSCON=y
-# CONFIG_MFD_TWL4030 is not set
-# CONFIG_MFD_TWL6030 is not set
-CONFIG_RAVE_SP_CORE=y
-# CONFIG_MFD_STPMIC1 is not set
-# CONFIG_MFD_RN568PMIC is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_ROHM_BD718XX is not set
-# end of Multifunction device drivers
-
-#
-# Misc devices
-#
-# CONFIG_JTAG is not set
-# CONFIG_SRAM is not set
-CONFIG_DEV_MEM=y
-# CONFIG_UBOOTVAR is not set
-# CONFIG_STORAGE_BY_UUID is not set
-# end of Misc devices
-
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_LED_GPIO_OF=y
-# CONFIG_LED_GPIO_RGB is not set
-# CONFIG_LED_GPIO_BICOLOR is not set
-CONFIG_LED_TRIGGERS=y
-# CONFIG_LED_PCA955X is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT25=y
-CONFIG_EEPROM_AT24=y
-# end of EEPROM support
-
-#
-# Input device support
-#
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_IMX_KEYPAD is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_USB is not set
-# CONFIG_INPUT_SPECIALKEYS is not set
-# end of Input device support
-
-CONFIG_WATCHDOG_IMX_RESET_SOURCE=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_POLLER is not set
-# CONFIG_WATCHDOG_DW is not set
-CONFIG_WATCHDOG_IMX=y
-CONFIG_RAVE_SP_WATCHDOG=y
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_PWM is not set
-# CONFIG_HWRNG is not set
-
-#
-# DMA support
-#
-# end of DMA support
-
-CONFIG_GPIOLIB=y
-
-#
-# GPIO
-#
-# CONFIG_GPIO_74164 is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-CONFIG_GPIO_IMX=y
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_DESIGNWARE is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SIFIVE is not set
-# CONFIG_GPIO_LATCH is not set
-# end of GPIO
-
-# CONFIG_W1 is not set
-
-#
-# Pin controllers
-#
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX_IOMUX_V3=y
-# CONFIG_PINCTRL_SINGLE is not set
-# end of Pin controllers
-
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_RMEM is not set
-# CONFIG_NVMEM_SNVS_LPGPR is not set
-CONFIG_IMX_OCOTP=y
-# CONFIG_IMX_OCOTP_WRITE is not set
-CONFIG_RAVE_SP_EEPROM=y
-# CONFIG_EEPROM_93XX46 is not set
-
-#
-# Bus devices
-#
-# CONFIG_IMX_WEIM is not set
-# end of Bus devices
-
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED=y
-# CONFIG_REGULATOR_PFUZE is not set
-# CONFIG_REGULATOR_ANATOP is not set
-
-#
-# Remoteproc drivers
-#
-# CONFIG_REMOTEPROC is not set
-# end of Remoteproc drivers
-
-# CONFIG_RESET_CONTROLLER is not set
-CONFIG_HW_HAS_PCI=y
-
-#
-# PCI bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_IMX6 is not set
-# CONFIG_PCI_ECAM_GENERIC is not set
-# end of PCI bus options
-
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_ABRACON is not set
-# CONFIG_RTC_DRV_PCF85363 is not set
-# CONFIG_RTC_DRV_IMXDI is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-# CONFIG_QEMU_FW_CFG is not set
-# end of Firmware Drivers
-
-#
-# FPGA Configuration Support
-#
-# CONFIG_FPGA is not set
-# end of FPGA Configuration Support
-
-CONFIG_GENERIC_PHY=y
-CONFIG_USB_NOP_XCEIV=y
-CONFIG_PHY_FSL_IMX8MQ_USB=y
-
-#
-# Hardware crypto devices
-#
-# CONFIG_FSL_CAAM_RNG_PBL_INIT is not set
-# end of Hardware crypto devices
-
-#
-# Memory controller drivers
-#
-# end of Memory controller drivers
-
-#
-# SoC drivers
-#
-
-#
-# i.MX SoC drivers
-#
-CONFIG_IMX_GPCV2_PM_DOMAINS=y
-CONFIG_IMX8M_FEATCTRL=y
-# end of i.MX SoC drivers
-
-#
-# KVX SoC drivers
-#
-# end of KVX SoC drivers
-# end of SoC drivers
-
-#
-# NVME Support
-#
-# end of NVME Support
-
-#
-# i.MX8M DDR controllers
-#
-CONFIG_IMX8M_DRAM=y
-# end of i.MX8M DDR controllers
-
-CONFIG_REBOOT_MODE=y
-CONFIG_SYSCON_REBOOT_MODE=y
-# CONFIG_NVMEM_REBOOT_MODE is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_VIRTIO_MENU is not set
-# end of Drivers
-
-#
-# Filesystem support
-#
-CONFIG_FS=y
-CONFIG_FS_LEGACY=y
-
-#
-# Some selected filesystems still use the legacy FS API.
-#
-
-#
-# Consider updating them.
-#
-CONFIG_FS_AUTOMOUNT=y
-# CONFIG_FS_CRAMFS is not set
-CONFIG_FS_EXT4=y
-CONFIG_FS_RAMFS=y
-CONFIG_FS_DEVFS=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
-CONFIG_FS_NFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-# CONFIG_FS_JFFS2 is not set
-# CONFIG_FS_BPKFS is not set
-# CONFIG_FS_UIMAGEFS is not set
-# CONFIG_FS_PSTORE is not set
-# CONFIG_FS_SQUASHFS is not set
-
-#
-# ZLIB support disabled
-#
-
-#
-# LZ4 support disabled
-#
-
-#
-# LZO support disabled
-#
-
-#
-# XZ support disabled
-#
-
-#
-# ZSTD support disabled
-#
-CONFIG_FS_RATP=y
-# end of Filesystem support
-
-#
-# Library routines
-#
-CONFIG_PARAMETER=y
-CONFIG_UNCOMPRESS=y
-CONFIG_ZLIB=y
-# CONFIG_BZLIB is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-# CONFIG_ZSTD_DECOMPRESS is not set
-# CONFIG_XZ_DECOMPRESS is not set
-# CONFIG_BASE64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_PROCESS_ESCAPE_SEQUENCE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_FNMATCH=y
-CONFIG_QSORT=y
-CONFIG_IMAGE_SPARSE=y
-CONFIG_RATP=y
-# CONFIG_ALLOW_PRNG_FALLBACK is not set
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC8 is not set
-
-#
-# Library gui routines
-#
-# end of Library gui routines
-
-CONFIG_PRINTF_UUID=y
-CONFIG_NLS=y
-# CONFIG_BLOBGEN is not set
-CONFIG_ARCH_HAS_STACK_DUMP=y
-CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
-CONFIG_ARCH_HAS_ZERO_PAGE=y
-# end of Library routines
-
-#
-# Crypto support
-#
-CONFIG_CRC32=y
-CONFIG_CRC_ITU_T=y
-CONFIG_DIGEST=y
-CONFIG_HAVE_DIGEST_MD5=y
-# CONFIG_DIGEST_CRC32_GENERIC is not set
-CONFIG_DIGEST_MD5_GENERIC=y
-# CONFIG_DIGEST_SHA1_GENERIC is not set
-# CONFIG_DIGEST_SHA224_GENERIC is not set
-# CONFIG_DIGEST_SHA256_GENERIC is not set
-# CONFIG_DIGEST_SHA384_GENERIC is not set
-# CONFIG_DIGEST_SHA512_GENERIC is not set
-# CONFIG_DIGEST_HMAC_GENERIC is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
-# end of Crypto support
-
-#
-# Firmware files
-#
-CONFIG_EXTRA_FIRMWARE_DIR="firmware"
-CONFIG_FIRMWARE_IMX_LPDDR4_PMU_TRAIN=y
-CONFIG_FIRMWARE_IMX8MM_ATF=y
-CONFIG_FIRMWARE_IMX8MP_ATF=y
-CONFIG_FIRMWARE_IMX8MQ_ATF=y
-# end of Firmware files
-
-#
-# Host Tools
-#
-# CONFIG_COMPILE_HOST_TOOLS is not set
-# CONFIG_ARCH_IMX_USBLOADER is not set
-# end of Host Tools
-
-#
-# Target Tools
-#
-# CONFIG_IMD_TARGET is not set
-# CONFIG_KERNEL_INSTALL_TARGET is not set
-# CONFIG_BAREBOXENV_TARGET is not set
-# CONFIG_BAREBOXCRC32_TARGET is not set
-# CONFIG_MVEBU_KWBOOT_TARGET is not set
-# end of Target Tools
-
-# CONFIG_TEST is not set
diff --git a/configs/platform-v8a/barebox-rockchip.config b/configs/platform-v8a/barebox-rockchip.config
deleted file mode 100644
index e95cc37cdb22..000000000000
--- a/configs/platform-v8a/barebox-rockchip.config
+++ /dev/null
@@ -1,925 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.05.0 Configuration
-#
-CONFIG_ARM=y
-CONFIG_ARM_LINUX=y
-CONFIG_TEXT_BASE=0x0
-
-#
-# System Type
-#
-CONFIG_ARCH_MULTIARCH=y
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_ARM64_VIRT is not set
-# CONFIG_ARCH_BCM283X is not set
-# CONFIG_ARCH_IMX is not set
-CONFIG_ARCH_ROCKCHIP=y
-# CONFIG_ARCH_ZYNQMP is not set
-
-#
-# Processor Type
-#
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_64=y
-CONFIG_CPU_V8=y
-CONFIG_CPU_64v8=y
-
-#
-# processor features
-#
-# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
-CONFIG_ARCH_TEXT_BASE=0x0
-
-#
-# Rockchip Features
-#
-CONFIG_RK_TIMER=1
-CONFIG_ARCH_ROCKCHIP_V8=y
-CONFIG_ARCH_RK3568=y
-
-#
-# select Rockchip boards:
-#
-CONFIG_MACH_RK3568_EVB=y
-# CONFIG_MACH_RK3568_BPI_R2PRO is not set
-# CONFIG_MACH_PINE64_QUARTZ64 is not set
-CONFIG_MACH_RADXA_ROCK3=y
-# CONFIG_MACH_RADXA_CM3 is not set
-
-#
-# select board features:
-#
-CONFIG_ARCH_ROCKCHIP_ATF=y
-# CONFIG_ARCH_RK3568_OPTEE is not set
-# end of Rockchip Features
-
-# CONFIG_BOARD_ARM_GENERIC_DT is not set
-# end of System Type
-
-CONFIG_64BIT=y
-
-#
-# ARM specific settings
-#
-# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
-CONFIG_ARM_EXCEPTIONS=y
-CONFIG_ARM_SMCCC=y
-CONFIG_ARM_PSCI_OF=y
-CONFIG_ARM_PSCI_CLIENT=y
-CONFIG_ARM_ATF=y
-# end of ARM specific settings
-
-CONFIG_GREGORIAN_CALENDER=y
-CONFIG_HAS_KALLSYMS=y
-CONFIG_HAS_CACHE=y
-CONFIG_HAS_DMA=y
-CONFIG_ARCH_HAS_SJLJ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_BLOCK=y
-CONFIG_BLOCK_WRITE=y
-CONFIG_FILETYPE=y
-CONFIG_BINFMT=y
-CONFIG_UIMAGE=y
-CONFIG_LOGBUF=y
-CONFIG_STDDEV=y
-CONFIG_MENUTREE=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_USBGADGET_START=y
-CONFIG_BOOT=y
-CONFIG_FASTBOOT_BASE=y
-
-#
-# General Settings
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_BANNER=y
-CONFIG_MEMINFO=y
-CONFIG_ENVIRONMENT_VARIABLES=y
-CONFIG_GLOBALVAR=y
-CONFIG_NVVAR=y
-
-#
-# memory layout
-#
-CONFIG_HAVE_PBL_IMAGE=y
-CONFIG_HAVE_PBL_MULTI_IMAGES=y
-CONFIG_HAVE_IMAGE_COMPRESSION=y
-CONFIG_PBL_IMAGE=y
-CONFIG_PBL_MULTI_IMAGES=y
-CONFIG_PBL_RELOCATABLE=y
-CONFIG_IMAGE_COMPRESSION=y
-# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
-CONFIG_IMAGE_COMPRESSION_LZO=y
-# CONFIG_IMAGE_COMPRESSION_GZIP is not set
-# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
-# CONFIG_IMAGE_COMPRESSION_NONE is not set
-CONFIG_MMU=y
-CONFIG_MMU_EARLY=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
-CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
-CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
-CONFIG_STACK_SIZE=0x8000
-CONFIG_MALLOC_SIZE=0x0
-# end of memory layout
-
-# CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_RELOCATABLE=y
-# CONFIG_PANIC_HANG is not set
-CONFIG_PROMPT="barebox:"
-CONFIG_BAUDRATE=115200
-CONFIG_CBSIZE=1024
-CONFIG_FIRMWARE=y
-CONFIG_SHELL_HUSH=y
-# CONFIG_SHELL_SIMPLE is not set
-# CONFIG_SHELL_NONE is not set
-CONFIG_GLOB=y
-CONFIG_GLOB_SORT=y
-CONFIG_PROMPT_HUSH_PS2="> "
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
-CONFIG_DYNAMIC_CRC_TABLE=y
-CONFIG_ERRNO_MESSAGES=y
-CONFIG_TIMESTAMP=y
-CONFIG_BOOTM=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-# CONFIG_BOOTM_OFTREE_UIMAGE is not set
-# CONFIG_BOOTM_AIMAGE is not set
-# CONFIG_BOOTM_ELF is not set
-# CONFIG_BOOTM_FITIMAGE is not set
-CONFIG_BLSPEC=y
-CONFIG_FLEXIBLE_BOOTARGS=y
-CONFIG_MMCBLKDEV_ROOTARG=y
-CONFIG_BAREBOX_UPDATE=y
-CONFIG_SYSTEM_PARTITIONS=y
-CONFIG_IMD=y
-CONFIG_CONSOLE_FULL=y
-# CONFIG_CONSOLE_SIMPLE is not set
-# CONFIG_CONSOLE_NONE is not set
-CONFIG_CONSOLE_ACTIVATE_FIRST=y
-# CONFIG_CONSOLE_ACTIVATE_ALL is not set
-# CONFIG_CONSOLE_ACTIVATE_NONE is not set
-CONFIG_CONSOLE_ALLOW_COLOR=y
-# CONFIG_CONSOLE_DISABLE_INPUT is not set
-CONFIG_PBL_CONSOLE=y
-# CONFIG_CONSOLE_RATP is not set
-CONFIG_PARTITION=y
-CONFIG_PARTITION_DISK=y
-CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
-CONFIG_ENV_HANDLING=y
-CONFIG_DEFAULT_ENVIRONMENT=y
-CONFIG_DEFAULT_COMPRESSION_NONE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
-# CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG is not set
-CONFIG_DEFAULT_ENVIRONMENT_PATH=""
-CONFIG_HAS_SCHED=y
-CONFIG_POLLER=y
-# CONFIG_BTHREAD is not set
-CONFIG_STATE=y
-# CONFIG_STATE_CRYPTO is not set
-# CONFIG_STATE_BACKWARD_COMPATIBLE is not set
-CONFIG_BOOTCHOOSER=y
-CONFIG_RESET_SOURCE=y
-# CONFIG_MACHINE_ID is not set
-# CONFIG_SYSTEMD_OF_WATCHDOG is not set
-CONFIG_EXTERNAL_DTS_FRAGMENTS=""
-
-#
-# OP-TEE loading
-#
-# CONFIG_BOOTM_OPTEE is not set
-# CONFIG_PBL_OPTEE is not set
-# end of OP-TEE loading
-
-#
-# Android Fastboot
-#
-CONFIG_FASTBOOT_SPARSE=y
-CONFIG_FASTBOOT_CMD_OEM=y
-# end of Android Fastboot
-# end of General Settings
-
-#
-# Debugging
-#
-CONFIG_COMPILE_LOGLEVEL=6
-CONFIG_DEFAULT_LOGLEVEL=7
-# CONFIG_DEBUG_LL is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_ROCKCHIP_UART_PORT=2
-# CONFIG_DEBUG_INITCALLS is not set
-# CONFIG_DEBUG_PBL is not set
-# CONFIG_DEBUG_PROBES is not set
-# CONFIG_PBL_BREAK is not set
-# CONFIG_PRINTF_FULL is not set
-# CONFIG_UBSAN is not set
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-# CONFIG_KASAN is not set
-# CONFIG_COMPILE_TEST is not set
-# end of Debugging
-
-#
-# EFI (Extensible Firmware Interface) Support
-#
-# end of EFI (Extensible Firmware Interface) Support
-
-CONFIG_HAS_DEBUG_LL=y
-CONFIG_COMMAND_SUPPORT=y
-CONFIG_COMPILE_HASH=y
-
-#
-# Commands
-#
-
-#
-# Information
-#
-# CONFIG_CMD_TUTORIAL is not set
-CONFIG_CMD_ARM_CPUINFO=y
-CONFIG_CMD_DEVINFO=y
-# CONFIG_CMD_DEVLOOKUP is not set
-# CONFIG_CMD_DEVUNBIND is not set
-CONFIG_CMD_DMESG=y
-CONFIG_CMD_DRVINFO=y
-CONFIG_CMD_HELP=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_IMD=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_REGULATOR=y
-# CONFIG_CMD_NVMEM is not set
-CONFIG_CMD_VERSION=y
-# CONFIG_CMD_MMC is not set
-CONFIG_CMD_MMC_EXTCSD=y
-# CONFIG_CMD_POLLER is not set
-# CONFIG_CMD_SLICE is not set
-# end of Information
-
-#
-# Boot
-#
-CONFIG_CMD_BOOT=y
-CONFIG_CMD_BOOTM=y
-CONFIG_CMD_GO=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_LOADY is not set
-CONFIG_CMD_RESET=y
-# CONFIG_CMD_UIMAGE is not set
-CONFIG_CMD_BOOTCHOOSER=y
-# end of Boot
-
-#
-# Partition
-#
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_AUTOMOUNT=y
-CONFIG_CMD_MOUNT=y
-CONFIG_CMD_UMOUNT=y
-# end of Partition
-
-#
-# Environment
-#
-CONFIG_CMD_NV=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_DEFAULTENV=y
-CONFIG_CMD_GLOBAL=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_SETENV=y
-# end of Environment
-
-#
-# File
-#
-CONFIG_CMD_BASENAME=y
-CONFIG_CMD_CAT=y
-CONFIG_CMD_CD=y
-CONFIG_CMD_CP=y
-# CONFIG_CMD_CMP is not set
-CONFIG_CMD_DIGEST=y
-CONFIG_CMD_DIRNAME=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_LS=y
-# CONFIG_CMD_STAT is not set
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_MKDIR=y
-CONFIG_CMD_PWD=y
-CONFIG_CMD_READLINK=y
-CONFIG_CMD_RM=y
-CONFIG_CMD_RMDIR=y
-CONFIG_CMD_SHA1SUM=y
-# CONFIG_CMD_SHA224SUM is not set
-# CONFIG_CMD_SHA256SUM is not set
-# CONFIG_CMD_SHA384SUM is not set
-# CONFIG_CMD_SHA512SUM is not set
-CONFIG_CMD_UNCOMPRESS=y
-# end of File
-
-#
-# Shell scripting
-#
-CONFIG_CMD_FALSE=y
-CONFIG_CMD_GETOPT=y
-CONFIG_CMD_LET=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_READF=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_TEST=y
-CONFIG_CMD_TRUE=y
-# end of Shell scripting
-
-#
-# Network
-#
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_HOST=y
-CONFIG_NET_CMD_IFUP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_IP_ROUTE_GET=y
-# CONFIG_CMD_ETHLOG is not set
-# end of Network
-
-#
-# Console and Framebuffer interaction
-#
-CONFIG_CMD_CLEAR=y
-CONFIG_CMD_ECHO=y
-# CONFIG_CMD_ECHO_E is not set
-CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
-CONFIG_CMD_MENU=y
-CONFIG_CMD_MENU_MANAGEMENT=y
-CONFIG_CMD_MENUTREE=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-# end of Console and Framebuffer interaction
-
-#
-# Memory
-#
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_MD=y
-CONFIG_CMD_MEMCMP=y
-CONFIG_CMD_MEMCPY=y
-CONFIG_CMD_MEMSET=y
-# CONFIG_CMD_MEMTEST is not set
-# CONFIG_CMD_MEMTESTER is not set
-CONFIG_CMD_MM=y
-CONFIG_CMD_MW=y
-# end of Memory
-
-#
-# Hardware manipulation
-#
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_HWMON=y
-# CONFIG_CMD_I2C is not set
-CONFIG_CMD_LED=y
-CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_SMC=y
-CONFIG_CMD_LED_TRIGGER=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USBGADGET=y
-CONFIG_CMD_WD=y
-CONFIG_CMD_WD_DEFAULT_TIMOUT=0
-# end of Hardware manipulation
-
-#
-# Miscellaneous
-#
-# CONFIG_CMD_2048 is not set
-CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
-CONFIG_CMD_FIRMWARELOAD=y
-CONFIG_CMD_OF_DIFF=y
-CONFIG_CMD_OF_DUMP=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_OF_PROPERTY=y
-# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
-# CONFIG_CMD_OF_FIXUP_STATUS is not set
-CONFIG_CMD_OF_OVERLAY=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_UPTIME is not set
-CONFIG_CMD_STATE=y
-# CONFIG_CMD_DHRYSTONE is not set
-# CONFIG_CMD_SPD_DECODE is not set
-# CONFIG_CMD_SEED is not set
-# end of Miscellaneous
-# end of Commands
-
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-# CONFIG_NET_NETCONSOLE is not set
-CONFIG_NET_RESOLV=y
-CONFIG_NET_IFUP=y
-CONFIG_NET_DHCP=y
-# CONFIG_NET_SNTP is not set
-CONFIG_NET_FASTBOOT=y
-
-#
-# Drivers
-#
-CONFIG_REGMAP_FORMATTED=y
-CONFIG_REGMAP_I2C=y
-CONFIG_OFTREE=y
-CONFIG_OFTREE_MEM_GENERIC=y
-CONFIG_DTC=y
-CONFIG_OFDEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_BAREBOX_DRIVERS=y
-CONFIG_OF_BAREBOX_ENV_IN_FS=y
-CONFIG_OF_OVERLAY=y
-# CONFIG_OF_OVERLAY_LIVE is not set
-CONFIG_AIODEV=y
-# CONFIG_LM75 is not set
-CONFIG_ROCKCHIP_SARADC=y
-
-#
-# serial drivers
-#
-# CONFIG_SERIAL_DEV_BUS is not set
-CONFIG_DRIVER_SERIAL_NS16550=y
-# CONFIG_DRIVER_SERIAL_CADENCE is not set
-# CONFIG_SERIAL_SIFIVE is not set
-# end of serial drivers
-
-CONFIG_PHYLIB=y
-
-#
-# Network drivers
-#
-# CONFIG_DRIVER_NET_BCMGENET is not set
-# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
-CONFIG_DRIVER_NET_DESIGNWARE_EQOS=y
-CONFIG_DRIVER_NET_DESIGNWARE_ROCKCHIP=y
-# CONFIG_DRIVER_NET_FSL_FMAN is not set
-# CONFIG_DRIVER_NET_KS8851_MLL is not set
-# CONFIG_DRIVER_NET_SMC911X is not set
-# CONFIG_DRIVER_NET_SMC91111 is not set
-# CONFIG_DRIVER_NET_LITEETH is not set
-
-#
-# phylib
-#
-
-#
-# MII PHY device drivers
-#
-# CONFIG_AR8327N_PHY is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-CONFIG_DP83867_PHY=y
-# CONFIG_DP83TD510_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-CONFIG_REALTEK_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-
-#
-# MII bus device drivers
-#
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# end of phylib
-
-# CONFIG_NET_USB is not set
-# CONFIG_DSA is not set
-# end of Network drivers
-
-#
-# SPI drivers
-#
-# CONFIG_SPI is not set
-# end of SPI drivers
-
-CONFIG_I2C=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_MV64XXX is not set
-CONFIG_I2C_RK3X=y
-# end of I2C Hardware Bus support
-
-# CONFIG_I2C_MUX is not set
-# CONFIG_MTD is not set
-CONFIG_DISK=y
-CONFIG_DISK_WRITE=y
-
-#
-# drive types
-#
-# CONFIG_DISK_ATA is not set
-# CONFIG_DISK_AHCI is not set
-
-#
-# interface types
-#
-# CONFIG_DISK_INTF_PLATFORM_IDE is not set
-CONFIG_USB=y
-CONFIG_USB_HOST=y
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_GADGET is not set
-CONFIG_USB_DWC3=y
-# CONFIG_USB_DWC3_HOST is not set
-# CONFIG_USB_DWC3_GADGET is not set
-CONFIG_USB_DWC3_DUAL_ROLE=y
-CONFIG_USB_DWC3_OF_SIMPLE=y
-# CONFIG_USB_EHCI is not set
-CONFIG_USB_XHCI=y
-# CONFIG_USB_ULPI is not set
-CONFIG_USB_OTGDEV=y
-CONFIG_USB_STORAGE=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_ONBOARD_HUB is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_AUTOSTART=y
-
-#
-# USB Gadget drivers
-#
-# CONFIG_USB_GADGET_DFU is not set
-CONFIG_USB_GADGET_SERIAL=y
-CONFIG_USB_GADGET_FASTBOOT=y
-# CONFIG_USB_GADGET_MASS_STORAGE is not set
-# CONFIG_USB_MUSB is not set
-# CONFIG_VIDEO is not set
-# CONFIG_SOUND is not set
-CONFIG_MCI_SDHCI=y
-CONFIG_MCI=y
-
-#
-# --- Feature list ---
-#
-# CONFIG_MCI_STARTUP is not set
-CONFIG_MCI_INFO=y
-CONFIG_MCI_WRITE=y
-CONFIG_MCI_MMC_BOOT_PARTITIONS=y
-# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
-
-#
-# --- MCI host drivers ---
-#
-CONFIG_MCI_DW=y
-# CONFIG_MCI_DW_PIO is not set
-CONFIG_MCI_ROCKCHIP_DWCMSHC=y
-CONFIG_MCI_ARASAN=y
-CONFIG_HAVE_CLK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_OF_PROVIDER=y
-CONFIG_COMMON_CLK_GPIO=y
-
-#
-# Clocksource
-#
-CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
-CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
-# CONFIG_CLOCKSOURCE_DW_APB_TIMER is not set
-# end of Clocksource
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_ACT8846 is not set
-# CONFIG_MFD_DA9053 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_LP3972 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC34704 is not set
-# CONFIG_MFD_MC9SDZ60 is not set
-# CONFIG_MFD_STMPE is not set
-CONFIG_MFD_SYSCON=y
-# CONFIG_MFD_TWL4030 is not set
-# CONFIG_MFD_TWL6030 is not set
-# CONFIG_MFD_STPMIC1 is not set
-# CONFIG_MFD_RN568PMIC is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-CONFIG_MFD_RK808=y
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_ROHM_BD718XX is not set
-# end of Multifunction device drivers
-
-#
-# Misc devices
-#
-# CONFIG_JTAG is not set
-# CONFIG_SRAM is not set
-CONFIG_STATE_DRV=y
-CONFIG_DEV_MEM=y
-# CONFIG_UBOOTVAR is not set
-# CONFIG_STORAGE_BY_UUID is not set
-# end of Misc devices
-
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_LED_GPIO_OF=y
-# CONFIG_LED_GPIO_RGB is not set
-# CONFIG_LED_GPIO_BICOLOR is not set
-CONFIG_LED_TRIGGERS=y
-# CONFIG_LED_PCA955X is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# end of EEPROM support
-
-#
-# Input device support
-#
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_USB is not set
-# CONFIG_INPUT_SPECIALKEYS is not set
-# end of Input device support
-
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_POLLER is not set
-CONFIG_WATCHDOG_DW=y
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_PWM is not set
-# CONFIG_HWRNG is not set
-
-#
-# DMA support
-#
-# end of DMA support
-
-CONFIG_GPIOLIB=y
-
-#
-# GPIO
-#
-CONFIG_GPIO_GENERIC=y
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_DESIGNWARE is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SIFIVE is not set
-# CONFIG_GPIO_LATCH is not set
-# end of GPIO
-
-# CONFIG_W1 is not set
-
-#
-# Pin controllers
-#
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ROCKCHIP=y
-# CONFIG_PINCTRL_SINGLE is not set
-# end of Pin controllers
-
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_RMEM is not set
-# CONFIG_NVMEM_SNVS_LPGPR is not set
-
-#
-# Bus devices
-#
-# end of Bus devices
-
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED=y
-# CONFIG_REGULATOR_ANATOP is not set
-CONFIG_REGULATOR_RK808=y
-
-#
-# Remoteproc drivers
-#
-# CONFIG_REMOTEPROC is not set
-# end of Remoteproc drivers
-
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_RESET_IMX7 is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-# CONFIG_QEMU_FW_CFG is not set
-# end of Firmware Drivers
-
-#
-# FPGA Configuration Support
-#
-# CONFIG_FPGA is not set
-# end of FPGA Configuration Support
-
-CONFIG_GENERIC_PHY=y
-# CONFIG_USB_NOP_XCEIV is not set
-# CONFIG_PHY_FSL_IMX8MQ_USB is not set
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
-
-#
-# Hardware crypto devices
-#
-# end of Hardware crypto devices
-
-#
-# Memory controller drivers
-#
-# end of Memory controller drivers
-
-#
-# SoC drivers
-#
-
-#
-# i.MX SoC drivers
-#
-# end of i.MX SoC drivers
-
-#
-# KVX SoC drivers
-#
-# end of KVX SoC drivers
-
-#
-# Rockchip SoC drivers
-#
-# CONFIG_ROCKCHIP_IODOMAIN is not set
-# end of Rockchip SoC drivers
-# end of SoC drivers
-
-#
-# NVME Support
-#
-# end of NVME Support
-
-# CONFIG_SYSCON_REBOOT_MODE is not set
-# CONFIG_NVMEM_REBOOT_MODE is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_VIRTIO_MENU is not set
-# end of Drivers
-
-#
-# Filesystem support
-#
-CONFIG_FS=y
-CONFIG_FS_LEGACY=y
-
-#
-# Some selected filesystems still use the legacy FS API.
-#
-
-#
-# Consider updating them.
-#
-CONFIG_FS_AUTOMOUNT=y
-# CONFIG_FS_CRAMFS is not set
-CONFIG_FS_EXT4=y
-CONFIG_FS_RAMFS=y
-CONFIG_FS_DEVFS=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
-CONFIG_FS_NFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-# CONFIG_FS_BPKFS is not set
-# CONFIG_FS_UIMAGEFS is not set
-# CONFIG_FS_PSTORE is not set
-# CONFIG_FS_SQUASHFS is not set
-
-#
-# ZLIB support disabled
-#
-
-#
-# LZ4 support disabled
-#
-
-#
-# LZO support disabled
-#
-
-#
-# XZ support disabled
-#
-
-#
-# ZSTD support disabled
-#
-# end of Filesystem support
-
-#
-# Library routines
-#
-CONFIG_PARAMETER=y
-CONFIG_UNCOMPRESS=y
-CONFIG_ZLIB=y
-# CONFIG_BZLIB is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-# CONFIG_ZSTD_DECOMPRESS is not set
-# CONFIG_XZ_DECOMPRESS is not set
-# CONFIG_BASE64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_PROCESS_ESCAPE_SEQUENCE=y
-# CONFIG_LZO_DECOMPRESS is not set
-CONFIG_FNMATCH=y
-CONFIG_QSORT=y
-CONFIG_IMAGE_SPARSE=y
-# CONFIG_RATP is not set
-# CONFIG_ALLOW_PRNG_FALLBACK is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC8 is not set
-
-#
-# Library gui routines
-#
-# end of Library gui routines
-
-CONFIG_NLS=y
-# CONFIG_BLOBGEN is not set
-CONFIG_ARCH_HAS_STACK_DUMP=y
-CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
-CONFIG_ARCH_HAS_ZERO_PAGE=y
-# end of Library routines
-
-#
-# Crypto support
-#
-CONFIG_CRC32=y
-CONFIG_DIGEST=y
-CONFIG_HAVE_DIGEST_MD5=y
-CONFIG_HAVE_DIGEST_SHA1=y
-CONFIG_DIGEST_CRC32_GENERIC=y
-CONFIG_DIGEST_MD5_GENERIC=y
-CONFIG_DIGEST_SHA1_GENERIC=y
-# CONFIG_DIGEST_SHA224_GENERIC is not set
-# CONFIG_DIGEST_SHA256_GENERIC is not set
-# CONFIG_DIGEST_SHA384_GENERIC is not set
-# CONFIG_DIGEST_SHA512_GENERIC is not set
-# CONFIG_DIGEST_HMAC_GENERIC is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
-# end of Crypto support
-
-#
-# Firmware files
-#
-CONFIG_EXTRA_FIRMWARE_DIR="firmware"
-# end of Firmware files
-
-#
-# Host Tools
-#
-# CONFIG_COMPILE_HOST_TOOLS is not set
-CONFIG_RK_IMAGE=y
-CONFIG_RK_USB_LOADER=y
-# end of Host Tools
-
-#
-# Target Tools
-#
-# CONFIG_IMD_TARGET is not set
-CONFIG_KERNEL_INSTALL_TARGET=y
-# CONFIG_BAREBOXENV_TARGET is not set
-CONFIG_BAREBOXCRC32_TARGET=y
-# CONFIG_MVEBU_KWBOOT_TARGET is not set
-# end of Target Tools
-
-# CONFIG_TEST is not set
diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
index 7630dfdfb889..4e479660f6b7 100644
--- a/configs/platform-v8a/platformconfig
+++ b/configs/platform-v8a/platformconfig
@@ -176,8 +176,6 @@ PTXCONF_CONSOLE_SPEED="115200"
# bootloaders
#
# PTXCONF_AT91BOOTSTRAP2 is not set
-PTXCONF_BAREBOX_IMX8M=y
-PTXCONF_BAREBOX_ROCKCHIP=y
PTXCONF_BAREBOX_ARCH_STRING="arm"
PTXCONF_BAREBOX_DEPENDENCIES=y
PTXCONF_BAREBOX=y
diff --git a/configs/platform-v8a/platforms/barebox-imx8m.in b/configs/platform-v8a/platforms/barebox-imx8m.in
deleted file mode 100644
index 6f474ea972bf..000000000000
--- a/configs/platform-v8a/platforms/barebox-imx8m.in
+++ /dev/null
@@ -1,10 +0,0 @@
-## SECTION=bootloader
-
-config BAREBOX_IMX8M
- select FIRMWARE_IMX
- select FIRMWARE_IMX_BOOTIMAGE_IMX8
- select TF_A
- tristate
- prompt "Barebox (imx8m)"
- help
- FIXME
diff --git a/configs/platform-v8a/platforms/barebox-rockchip.in b/configs/platform-v8a/platforms/barebox-rockchip.in
deleted file mode 100644
index 03a3816bb9cc..000000000000
--- a/configs/platform-v8a/platforms/barebox-rockchip.in
+++ /dev/null
@@ -1,14 +0,0 @@
-## SECTION=bootloader
-
-config BAREBOX_ROCKCHIP
- tristate
- prompt "barebox (rockchip)"
- select HOST_LIBUSB
- select HOST_OPENSSL
- select HOST_LZOP
- select FIRMWARE_ROCKCHIP
- select FIRMWARE_ROCKCHIP_RK356x_BL31
- select FIRMWARE_ROCKCHIP_RK356x_BL32
- select FIRMWARE_ROCKCHIP_RK3568_SDRAM
- help
- Build the barebox bootloader for Rockchip boards.
diff --git a/configs/platform-v8a/rules/barebox-imx8m.make b/configs/platform-v8a/rules/barebox-imx8m.make
deleted file mode 100644
index f4b169784be3..000000000000
--- a/configs/platform-v8a/rules/barebox-imx8m.make
+++ /dev/null
@@ -1,125 +0,0 @@
-# -*-makefile-*-
-#
-# Copyright (C) 2020 by Sascha Hauer <s.hauer@pengutronix.de>
-#
-# For further information about the PTXdist project and license conditions
-# see the README file.
-#
-
-#
-# We provide this package
-#
-PACKAGES-$(PTXCONF_BAREBOX_IMX8M) += barebox-imx8m
-
-#
-# Paths and names
-#
-BAREBOX_IMX8M_VERSION := 2023.05.0
-BAREBOX_IMX8M_MD5 := 35a6a96f00df2a3f596efdc5d2459cb5
-BAREBOX_IMX8M := barebox-imx8m-$(BAREBOX_IMX8M_VERSION)
-BAREBOX_IMX8M_SUFFIX := tar.bz2
-BAREBOX_IMX8M_URL := $(call barebox-url, BAREBOX_IMX8M)
-BAREBOX_IMX8M_PATCHES := barebox-$(BAREBOX_IMX8M_VERSION)
-BAREBOX_IMX8M_SOURCE := $(SRCDIR)/$(BAREBOX_IMX8M_PATCHES).$(BAREBOX_IMX8M_SUFFIX)
-BAREBOX_IMX8M_DIR := $(BUILDDIR)/$(BAREBOX_IMX8M)
-BAREBOX_IMX8M_BUILD_DIR := $(BAREBOX_IMX8M_DIR)-build
-BAREBOX_IMX8M_CONFIG := $(call ptx/in-platformconfigdir, barebox-imx8m.config)
-BAREBOX_IMX8M_LICENSE := GPL-2.0-only
-BAREBOX_IMX8M_BUILD_OOT := KEEP
-
-# ----------------------------------------------------------------------------
-# Prepare
-# ----------------------------------------------------------------------------
-
-BAREBOX_IMX8M_INJECT_PATH := ${PTXDIST_SYSROOT_TARGET}/usr/lib
-
-# TF-A firmware blobs
-BAREBOX_IMX8M_INJECT_FILES += firmware/imx8mm-bl31.bin
-BAREBOX_IMX8M_INJECT_FILES += firmware/imx8mp-bl31.bin
-BAREBOX_IMX8M_INJECT_FILES += firmware/imx8mq-bl31.bin
-
-# DRAM firmware blobs
-BAREBOX_IMX8M_INJECT_FILES += firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin:firmware/lpddr4_pmu_train_1d_dmem.bin
-BAREBOX_IMX8M_INJECT_FILES += firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem.bin:firmware/lpddr4_pmu_train_1d_imem.bin
-BAREBOX_IMX8M_INJECT_FILES += firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin:firmware/lpddr4_pmu_train_2d_dmem.bin
-BAREBOX_IMX8M_INJECT_FILES += firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem.bin:firmware/lpddr4_pmu_train_2d_imem.bin
-
-# use host pkg-config for host tools
-BAREBOX_IMX8M_PATH := PATH=$(HOST_PATH)
-
-BAREBOX_IMX8M_WRAPPER_BLACKLIST := \
- $(PTXDIST_LOWLEVEL_WRAPPER_BLACKLIST)
-
-BAREBOX_IMX8M_CONF_OPT := \
- -C $(BAREBOX_IMX8M_DIR) \
- O=$(BAREBOX_IMX8M_BUILD_DIR) \
- BUILDSYSTEM_VERSION=$(PTXDIST_VCS_VERSION) \
- $(call barebox-opts, BAREBOX_IMX8M)
-
-BAREBOX_IMX8M_MAKE_OPT := $(BAREBOX_IMX8M_CONF_OPT)
-
-BAREBOX_IMX8M_IMAGES := barebox-nxp-imx8mp-evk.img \
- barebox-nxp-imx8mq-evk.img \
- barebox-nxp-imx8mm-evk.img
-BAREBOX_IMX8M_IMAGES := $(addprefix $(BAREBOX_IMX8M_BUILD_DIR)/images/,$(BAREBOX_IMX8M_IMAGES))
-
-ifdef PTXCONF_BAREBOX_IMX8M
-$(BAREBOX_IMX8M_CONFIG):
- @echo
- @echo "****************************************************************************"
- @echo " Please generate a bareboxconfig with 'ptxdist menuconfig barebox-imx8m'"
- @echo "****************************************************************************"
- @echo
- @echo
- @exit 1
-endif
-
-$(STATEDIR)/barebox-imx8m.prepare: $(BAREBOX_IMX8M_CONFIG)
- @$(call targetinfo)
- @$(call world/prepare, BAREBOX_IMX8M)
- @$(call world/inject, BAREBOX_IMX8M)
-
- @rm -f "$(BAREBOX_IMX8M_BUILD_DIR)/.ptxdist-defaultenv"
- @ln -s "$(call ptx/in-platformconfigdir, barebox-common-defaultenv)" \
- "$(BAREBOX_IMX8M_BUILD_DIR)/.ptxdist-defaultenv"
-
- @$(call touch)
-
-
-# ----------------------------------------------------------------------------
-# Install
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/barebox-imx8m.install:
- @$(call targetinfo)
- @$(call touch)
-
-# ----------------------------------------------------------------------------
-# Target-Install
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/barebox-imx8m.targetinstall:
- @$(call targetinfo)
- @$(foreach image, $(BAREBOX_IMX8M_IMAGES), \
- install -m 644 \
- $(image) $(IMAGEDIR)/$(notdir $(image))-imx8m$(ptx/nl))
- @$(call touch)
-
-# ----------------------------------------------------------------------------
-# Clean
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/barebox-imx8m.clean:
- @$(call targetinfo)
- @$(call clean_pkg, BAREBOX_IMX8M)
- @$(foreach image, $(BAREBOX_IMX8M_IMAGES), \
- rm -fv $(IMAGEDIR)/$(notdir $(image))-imx8m$(ptx/nl))
-
-# ----------------------------------------------------------------------------
-# oldconfig / menuconfig
-# ----------------------------------------------------------------------------
-
-barebox-imx8m_oldconfig barebox-imx8m_menuconfig barebox-imx8m_nconfig: $(STATEDIR)/barebox-imx8m.extract
- @$(call world/kconfig, BAREBOX_IMX8M, $(subst barebox-imx8m_,,$@))
-
-# vim: syntax=make
diff --git a/configs/platform-v8a/rules/barebox-rockchip.make b/configs/platform-v8a/rules/barebox-rockchip.make
deleted file mode 100644
index 1ca7e8c109ee..000000000000
--- a/configs/platform-v8a/rules/barebox-rockchip.make
+++ /dev/null
@@ -1,163 +0,0 @@
-# -*-makefile-*-
-#
-# Copyright (C) 2022 by Michael Riesch <michael.riesch@wolfvision.net>
-#
-# For further information about the PTXdist project and license conditions
-# see the README file.
-#
-
-#
-# We provide this package
-#
-PACKAGES-$(PTXCONF_BAREBOX_ROCKCHIP) += barebox-rockchip
-
-#
-# Paths and names
-#
-BAREBOX_ROCKCHIP_VERSION := 2023.05.0
-BAREBOX_ROCKCHIP_MD5 := 35a6a96f00df2a3f596efdc5d2459cb5
-BAREBOX_ROCKCHIP := barebox-rockchip-$(BAREBOX_ROCKCHIP_VERSION)
-BAREBOX_ROCKCHIP_SUFFIX := tar.bz2
-BAREBOX_ROCKCHIP_URL := $(call barebox-url, BAREBOX_ROCKCHIP)
-BAREBOX_ROCKCHIP_PATCHES := barebox-rockchip-$(BAREBOX_ROCKCHIP_VERSION)
-BAREBOX_ROCKCHIP_SOURCE := $(SRCDIR)/$(BAREBOX_ROCKCHIP_PATCHES).$(BAREBOX_ROCKCHIP_SUFFIX)
-BAREBOX_ROCKCHIP_DIR := $(BUILDDIR)/$(BAREBOX_ROCKCHIP)
-BAREBOX_ROCKCHIP_BUILD_DIR := $(BAREBOX_ROCKCHIP_DIR)-build
-BAREBOX_ROCKCHIP_LICENSE := GPL-2.0-only
-BAREBOX_ROCKCHIP_DEVPKG := NO
-BAREBOX_ROCKCHIP_BUILD_OOT := KEEP
-
-BAREBOX_ROCKCHIP_CONFIG := $(call ptx/in-platformconfigdir, \
- barebox-rockchip.config)
-
-# ----------------------------------------------------------------------------
-# Prepare
-# ----------------------------------------------------------------------------
-
-BAREBOX_ROCKCHIP_INJECT_PATH := ${PTXDIST_SYSROOT_TARGET}/usr/lib/firmware
-BAREBOX_ROCKCHIP_INJECT_FILES += rk3568_bl31_v1.24.elf:firmware/rk3568-bl31.bin
-BAREBOX_ROCKCHIP_INJECT_FILES += rk3568_bl32_v1.05.bin:firmware/rk3568-op-tee.bin
-BAREBOX_ROCKCHIP_INJECT_FILES += rk3568_ddr_1560MHz_v1.08.bin:arch/arm/boards/rockchip-rk3568-evb/sdram-init.bin
-BAREBOX_ROCKCHIP_INJECT_FILES += rk3568_ddr_1560MHz_v1.08.bin:arch/arm/boards/radxa-rock3/sdram-init.bin
-
-# use host pkg-config for host tools
-BAREBOX_ROCKCHIP_PATH := PATH=$(HOST_PATH)
-
-BAREBOX_ROCKCHIP_WRAPPER_BLACKLIST := \
- $(PTXDIST_LOWLEVEL_WRAPPER_BLACKLIST)
-
-BAREBOX_ROCKCHIP_CONF_TOOL := kconfig
-BAREBOX_ROCKCHIP_CONF_OPT := \
- -C $(BAREBOX_ROCKCHIP_DIR) \
- O=$(BAREBOX_ROCKCHIP_BUILD_DIR) \
- $(call barebox-opts, BAREBOX_ROCKCHIP)
-
-BAREBOX_ROCKCHIP_MAKE_OPT := $(BAREBOX_ROCKCHIP_CONF_OPT)
-
-BAREBOX_ROCKCHIP_IMAGES := images/barebox-rk3568-evb.img images/barebox-rock3a.img
-BAREBOX_ROCKCHIP_IMAGES := $(addprefix $(BAREBOX_ROCKCHIP_BUILD_DIR)/,$(BAREBOX_ROCKCHIP_IMAGES))
-
-ifdef PTXCONF_BAREBOX_ROCKCHIP
-$(BAREBOX_ROCKCHIP_CONFIG):
- @echo
- @echo "****************************************************************************"
- @echo " Please generate a bareboxconfig with 'ptxdist menuconfig barebox-rockchip'"
- @echo "****************************************************************************"
- @echo
- @echo
- @exit 1
-endif
-
-BAREBOX_ROCKCHIP_EXTRA_ENV_PATH := $(foreach path, \
- $(call remove_quotes,"barebox-common-defaultenv"), \
- $(call ptx/in-platformconfigdir,$(path)))
-BAREBOX_ROCKCHIP_EXTRA_ENV_DEPS := \
- $(BAREBOX_ROCKCHIP_EXTRA_ENV_PATH) \
- $(call ptx/force-sh, find $(BAREBOX_ROCKCHIP_EXTRA_ENV_PATH) -print 2>/dev/null)
-
-$(STATEDIR)/barebox-rockchip.prepare: $(BAREBOX_ROCKCHIP_EXTRA_ENV_DEPS)
- @$(call targetinfo)
- @$(call world/prepare, BAREBOX_ROCKCHIP)
- @$(call world/inject, BAREBOX_ROCKCHIP)
-
- @rm -rf $(BAREBOX_ROCKCHIP_BUILD_DIR)/.ptxdist-defaultenv
- @ptxd_source_kconfig "${PTXDIST_PTXCONFIG}" && \
- ptxd_source_kconfig "${PTXDIST_PLATFORMCONFIG}" && \
- $(foreach path, $(BAREBOX_ROCKCHIP_EXTRA_ENV_PATH), \
- if [ -d "$(path)" ]; then \
- ptxd_filter_dir "$(path)" \
- $(BAREBOX_ROCKCHIP_BUILD_DIR)/.ptxdist-defaultenv; \
- else \
- cp "$(path)" $(BAREBOX_ROCKCHIP_BUILD_DIR)/.ptxdist-defaultenv/; \
- fi;)
- @rm -rf $(BAREBOX_ROCKCHIP_BUILD_DIR)/defaultenv/barebox_default_env
-
- @$(call touch)
-
-# ----------------------------------------------------------------------------
-# Compile
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/barebox-rockchip.compile:
- @$(call targetinfo)
-
- @if test $$(grep -c -e "^CONFIG_DEFAULT_ENVIRONMENT_PATH=.*\$(BAREBOX_ROCKCHIP_BUILD_DIR)/.ptxdist-defaultenv" $(BAREBOX_ROCKCHIP_BUILD_DIR)/.config) -eq 0; then \
- sed -i -e "s,^\(CONFIG_DEFAULT_ENVIRONMENT_PATH=.*\)\"$$,\1 $(BAREBOX_ROCKCHIP_BUILD_DIR)/.ptxdist-defaultenv\"," \
- $(BAREBOX_ROCKCHIP_BUILD_DIR)/.config; \
- fi
-
- @$(call world/compile, BAREBOX_ROCKCHIP)
- @$(call touch)
-
-# ----------------------------------------------------------------------------
-# Install
-# ----------------------------------------------------------------------------
-
-BAREBOX_ROCKCHIP_PROGS_HOST := \
- rk-usb-loader
-
-$(STATEDIR)/barebox-rockchip.install:
- @$(call targetinfo)
-
- @$(foreach prog, $(BAREBOX_ROCKCHIP_PROGS_HOST), \
- if [ -e $(BAREBOX_ROCKCHIP_BUILD_DIR)/scripts/$(prog) ]; then \
- install -v -D -m755 \
- $(BAREBOX_ROCKCHIP_BUILD_DIR)/scripts/$(prog) \
- $(PTXDIST_SYSROOT_HOST)/bin/$(notdir $(prog)) \
- || exit; \
- fi;)
-
- @$(call touch)
-
-# ----------------------------------------------------------------------------
-# Target-Install
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/barebox-rockchip.targetinstall:
- @$(call targetinfo)
- @$(foreach image, $(BAREBOX_ROCKCHIP_IMAGES), \
- install -m 644 \
- $(image) $(IMAGEDIR)/$(notdir $(image))-rockchip$(ptx/nl))
- @$(call touch)
-
-# ----------------------------------------------------------------------------
-# Clean
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/barebox-rockchip.clean:
- @$(call targetinfo)
- @$(call clean_pkg, BAREBOX_ROCKCHIP)
- @$(foreach image, $(BAREBOX_ROCKCHIP_IMAGES), \
- rm -fv $(IMAGEDIR)/$(notdir $(image))-rockchip$(ptx/nl))
- @$(foreach prog, $(BAREBOX_ROCKCHIP_PROGS_HOST), \
- rm -vf $(PTXDIST_SYSROOT_HOST)/bin/$(notdir $(prog))$(ptx/nl))
-
-
-# ----------------------------------------------------------------------------
-# oldconfig / menuconfig
-# ----------------------------------------------------------------------------
-
-$(call ptx/kconfig-targets, barebox-rockchip): $(STATEDIR)/barebox-rockchip.extract
- @$(call world/kconfig, BAREBOX_ROCKCHIP, $(subst barebox-rockchip_,,$@))
-
-# vim: syntax=make
--
2.39.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
` (7 preceding siblings ...)
2023-05-31 11:47 ` [DistroKit] [PATCH v3 8/8] v8a: barebox: remove left-over SoC-specific rules Ahmad Fatoum
@ 2023-05-31 12:02 ` Robert Schwebel
8 siblings, 0 replies; 12+ messages in thread
From: Robert Schwebel @ 2023-05-31 12:02 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: distrokit
On Wed, May 31, 2023 at 01:47:36PM +0200, Ahmad Fatoum wrote:
> We already make use of the barebox multi-image support, which prefixes
> the (compressed) barebox proper binary with a different prebootloader
> (+ device tree) each time to support multiple boards in the same build.
>
> So far, this was only possible within the same subarch, so while we had
> one barebox rule for all of i.MX8MM/N/Q, we needed a separate barebox
> rule for the Rockchip platforms.
>
> barebox v2023.04.0 adds ARM "multiarch" support, which extends
> multi-image support to work across subarches. This series enables it
> for v8a and allows us to drop our barebox-imx8m and barebox-rockchip
> rules in favor of the upstream PTXdist barebox rule.
>
> The same could be done for v7a in the future too, but it would fatten
> the bootloader images a bit more, because it would adds drivers for 6
> unused platforms into each image (but not duplicate the DT). This is
> left as future exercise.
>
> v2 -> v3:
> - rebase on next
> - update to barebox v2023.05.0
> - remove some more no longer needed left-over files
>
> v1 -> v2:
> - dropped v6.2->v6.3.1 kernel update in favor of upstream/next's
> v6.2->v6.3 update
> - dropped SD-Card speed quirk altogether. This has been fixed
> upstream and the new maximum of 50MHz works for us, even with
> usbsdmux in-between.
Applied series to next.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [DistroKit] [PATCH v3 5/8] v8a: rockchip: use common environment
2023-05-31 11:47 ` [DistroKit] [PATCH v3 5/8] v8a: rockchip: use common environment Ahmad Fatoum
@ 2023-06-23 13:04 ` Roland Hieber
2023-06-23 13:14 ` Ahmad Fatoum
0 siblings, 1 reply; 12+ messages in thread
From: Roland Hieber @ 2023-06-23 13:04 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: distrokit
On Wed, May 31, 2023 at 01:47:41PM +0200, Ahmad Fatoum wrote:
> This effectively reverts commit 95014f4d8a50 ("v8a: rockchip: copy default
> barebox env"). The common environment and the rockchip one are now
> identical.
>
> The spi-nor part is just for the Rockchip board though, so let's make
> its execution conditional and drop barebox-rock3a-defaultenv.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> .../barebox-common-defaultenv/init/bootsource | 10 +++++++---
> .../barebox-rock3a-defaultenv/init/bootsource | 13 -------------
> .../nv/linux.bootargs.loglevel | 1 -
> configs/platform-v8a/rules/barebox-rockchip.make | 2 +-
> 4 files changed, 8 insertions(+), 18 deletions(-)
> delete mode 100644 configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
> delete mode 100644 configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
>
> diff --git a/configs/platform-v8a/barebox-common-defaultenv/init/bootsource b/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
> index 8f00bced5df2..db1915321531 100644
> --- a/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
> +++ b/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
> @@ -8,7 +8,11 @@ fi
> if [ "$bootsource" = mmc ]; then
> detect mmc$bootsource_instance
> global.boot.default="mmc$bootsource_instance net"
> -elif [ "$bootsource" = "spi-nor" ]; then
> - usbgadget -A '/dev/mmc0(sd)'
> - global.autoboot=abort
> +fi
> +
> +if [ "${global.model}" = "Radxa ROCK3 Model A" ]; then
At first I thought it would be better to match the board compatible (it
looks more machine-parsable and less subject to change), but then I
found out that there isn't a variable for that in barebox yet… Do you
think it makes sense to add one too? It seems like the code would be a
bit different than for the model though…
- Roland
> + if [ "$bootsource" = "spi-nor" ]; then
> + usbgadget -A '/dev/mmc1(sd)'
> + global.autoboot=abort
> + fi
> fi
> diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource b/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
> deleted file mode 100644
> index bc81609a49c0..000000000000
> --- a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
> +++ /dev/null
> @@ -1,13 +0,0 @@
> -#!/bin/sh
> -
> -if [ -n "${nv.boot.default}" ]; then
> - exit
> -fi
> -
> -if [ "$bootsource" = mmc ]; then
> - detect mmc$bootsource_instance
> - global.boot.default="mmc$bootsource_instance net"
> -elif [ "$bootsource" = "spi-nor" ]; then
> - usbgadget -A '/dev/mmc1(sd)'
> - global.autoboot=abort
> -fi
> diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
> deleted file mode 100644
> index 705752ca416d..000000000000
> --- a/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
> +++ /dev/null
> @@ -1 +0,0 @@
> -loglevel=5 systemd.log_level=warning systemd.show_status=auto
> diff --git a/configs/platform-v8a/rules/barebox-rockchip.make b/configs/platform-v8a/rules/barebox-rockchip.make
> index 805c8749d710..1ca7e8c109ee 100644
> --- a/configs/platform-v8a/rules/barebox-rockchip.make
> +++ b/configs/platform-v8a/rules/barebox-rockchip.make
> @@ -69,7 +69,7 @@ $(BAREBOX_ROCKCHIP_CONFIG):
> endif
>
> BAREBOX_ROCKCHIP_EXTRA_ENV_PATH := $(foreach path, \
> - $(call remove_quotes,"barebox-rock3a-defaultenv"), \
> + $(call remove_quotes,"barebox-common-defaultenv"), \
> $(call ptx/in-platformconfigdir,$(path)))
> BAREBOX_ROCKCHIP_EXTRA_ENV_DEPS := \
> $(BAREBOX_ROCKCHIP_EXTRA_ENV_PATH) \
> --
> 2.39.2
>
>
>
--
Roland Hieber, Pengutronix e.K. | r.hieber@pengutronix.de |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [DistroKit] [PATCH v3 5/8] v8a: rockchip: use common environment
2023-06-23 13:04 ` Roland Hieber
@ 2023-06-23 13:14 ` Ahmad Fatoum
0 siblings, 0 replies; 12+ messages in thread
From: Ahmad Fatoum @ 2023-06-23 13:14 UTC (permalink / raw)
To: Roland Hieber; +Cc: distrokit
On 23.06.23 15:04, Roland Hieber wrote:
> On Wed, May 31, 2023 at 01:47:41PM +0200, Ahmad Fatoum wrote:
>> This effectively reverts commit 95014f4d8a50 ("v8a: rockchip: copy default
>> barebox env"). The common environment and the rockchip one are now
>> identical.
>>
>> The spi-nor part is just for the Rockchip board though, so let's make
>> its execution conditional and drop barebox-rock3a-defaultenv.
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>> ---
>> .../barebox-common-defaultenv/init/bootsource | 10 +++++++---
>> .../barebox-rock3a-defaultenv/init/bootsource | 13 -------------
>> .../nv/linux.bootargs.loglevel | 1 -
>> configs/platform-v8a/rules/barebox-rockchip.make | 2 +-
>> 4 files changed, 8 insertions(+), 18 deletions(-)
>> delete mode 100644 configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
>> delete mode 100644 configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
>>
>> diff --git a/configs/platform-v8a/barebox-common-defaultenv/init/bootsource b/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
>> index 8f00bced5df2..db1915321531 100644
>> --- a/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
>> +++ b/configs/platform-v8a/barebox-common-defaultenv/init/bootsource
>> @@ -8,7 +8,11 @@ fi
>> if [ "$bootsource" = mmc ]; then
>> detect mmc$bootsource_instance
>> global.boot.default="mmc$bootsource_instance net"
>> -elif [ "$bootsource" = "spi-nor" ]; then
>> - usbgadget -A '/dev/mmc0(sd)'
>> - global.autoboot=abort
>> +fi
>> +
>> +if [ "${global.model}" = "Radxa ROCK3 Model A" ]; then
>
> At first I thought it would be better to match the board compatible (it
> looks more machine-parsable and less subject to change), but then I
> found out that there isn't a variable for that in barebox yet… Do you
> think it makes sense to add one too? It seems like the code would be a
> bit different than for the model though…
barebox v2023.07.0 should contain an of_compatible command exactly for
this use case[1]. This can be used instead of the model once we update.
I'd only advise this for scripts though. If you have a set of nv variables
that's board specific, you could install the defaultenv into the board dir
in the barebox source tree and add bbenv-y to the board Makefile.
[1]: https://github.com/barebox/barebox/commit/bf7405c00016beb7860729d18d4fe53772b81db7
>
> - Roland
>
>> + if [ "$bootsource" = "spi-nor" ]; then
>> + usbgadget -A '/dev/mmc1(sd)'
>> + global.autoboot=abort
>> + fi
>> fi
>> diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource b/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
>> deleted file mode 100644
>> index bc81609a49c0..000000000000
>> --- a/configs/platform-v8a/barebox-rock3a-defaultenv/init/bootsource
>> +++ /dev/null
>> @@ -1,13 +0,0 @@
>> -#!/bin/sh
>> -
>> -if [ -n "${nv.boot.default}" ]; then
>> - exit
>> -fi
>> -
>> -if [ "$bootsource" = mmc ]; then
>> - detect mmc$bootsource_instance
>> - global.boot.default="mmc$bootsource_instance net"
>> -elif [ "$bootsource" = "spi-nor" ]; then
>> - usbgadget -A '/dev/mmc1(sd)'
>> - global.autoboot=abort
>> -fi
>> diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
>> deleted file mode 100644
>> index 705752ca416d..000000000000
>> --- a/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
>> +++ /dev/null
>> @@ -1 +0,0 @@
>> -loglevel=5 systemd.log_level=warning systemd.show_status=auto
>> diff --git a/configs/platform-v8a/rules/barebox-rockchip.make b/configs/platform-v8a/rules/barebox-rockchip.make
>> index 805c8749d710..1ca7e8c109ee 100644
>> --- a/configs/platform-v8a/rules/barebox-rockchip.make
>> +++ b/configs/platform-v8a/rules/barebox-rockchip.make
>> @@ -69,7 +69,7 @@ $(BAREBOX_ROCKCHIP_CONFIG):
>> endif
>>
>> BAREBOX_ROCKCHIP_EXTRA_ENV_PATH := $(foreach path, \
>> - $(call remove_quotes,"barebox-rock3a-defaultenv"), \
>> + $(call remove_quotes,"barebox-common-defaultenv"), \
>> $(call ptx/in-platformconfigdir,$(path)))
>> BAREBOX_ROCKCHIP_EXTRA_ENV_DEPS := \
>> $(BAREBOX_ROCKCHIP_EXTRA_ENV_PATH) \
>> --
>> 2.39.2
>>
>>
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2023-06-23 13:14 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-31 11:47 [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 1/8] platforms: drop no longer needed blspec-rpi4 Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 2/8] v8a: barebox: rock3a: drop no longer needed SD-Card speed quirk Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 3/8] v8a: barebox: version bump v2023.01.0 → v2023.05.0 Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 4/8] Revert "v8a: barebox: rockchip: disable CONFIG_MMCBLKDEV_ROOTARG" Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 5/8] v8a: rockchip: use common environment Ahmad Fatoum
2023-06-23 13:04 ` Roland Hieber
2023-06-23 13:14 ` Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 6/8] v8a: barebox: configure upstream barebox rule for both imx8m and rockchip Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 7/8] v8a: barebox: switch to upstream rule Ahmad Fatoum
2023-05-31 11:47 ` [DistroKit] [PATCH v3 8/8] v8a: barebox: remove left-over SoC-specific rules Ahmad Fatoum
2023-05-31 12:02 ` [DistroKit] [PATCH v3 0/8] v8a: barebox: update to use upstream PTXdist rule Robert Schwebel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox