[DistroKit] [PATCH v2 2/7] v7a: barebox: add new rule for sama5d2 support

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

Later commits will have the v7a platform generate an image for Cortex-A5
based sama5d2 as well. Import here a new barebox-at91 rule that extends
the barebox-common rule to provide support for the two sama5d27 boards
supported by barebox:
	barebox-sama5d27-som1-ek.img
	barebox-sama5d27-som1-ek-xload-mmc.img
	barebox-groboards-sama5d27-giantboard.img
	barebox-groboards-sama5d27-giantboard-xload-mmc.img

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2: no changes
---
 .../barebox-at91-defaultenv/init/bootsource   |   9 +
 configs/platform-v7a/barebox-at91.config      | 847 ++++++++++++++++++
 configs/platform-v7a/barebox-at91.config.diff | 129 +++
 configs/platform-v7a/platformconfig           |   1 +
 .../platform-v7a/platforms/barebox-at91.in    |   8 +
 configs/platform-v7a/rules/barebox-at91.make  | 108 +++
 6 files changed, 1102 insertions(+)
 create mode 100755 configs/platform-v7a/barebox-at91-defaultenv/init/bootsource
 create mode 100644 configs/platform-v7a/barebox-at91.config
 create mode 100644 configs/platform-v7a/barebox-at91.config.diff
 create mode 100644 configs/platform-v7a/platforms/barebox-at91.in
 create mode 100644 configs/platform-v7a/rules/barebox-at91.make

diff --git a/configs/platform-v7a/barebox-at91-defaultenv/init/bootsource b/configs/platform-v7a/barebox-at91-defaultenv/init/bootsource
new file mode 100755
index 000000000000..35ee4d9a5664
--- /dev/null
+++ b/configs/platform-v7a/barebox-at91-defaultenv/init/bootsource
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if [ -n "$nv.boot.default" ]; then
+	exit
+fi
+
+if [ $bootsource = mmc ]; then
+	global.boot.default="mmc${bootsource_instance}.1 net"
+fi
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
new file mode 100644
index 000000000000..48d48fe086f4
--- /dev/null
+++ b/configs/platform-v7a/barebox-at91.config
@@ -0,0 +1,847 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Barebox/arm 2020.09.0 Configuration
+#
+CONFIG_ARM=y
+CONFIG_ARM_LINUX=y
+CONFIG_HAVE_MACH_ARM_HEAD=y
+CONFIG_ARM_USE_COMPRESSED_DTB=y
+CONFIG_TEXT_BASE=0x0
+
+#
+# System Type
+#
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCM283X is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DIGIC is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_SOCFPGA is not set
+# CONFIG_ARCH_S3C24xx is not set
+# CONFIG_ARCH_S5PCxx is not set
+# CONFIG_ARCH_S3C64xx is not set
+# CONFIG_ARCH_STM32MP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_UEMD is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
+# CONFIG_ARCH_QEMU is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+
+#
+# processor features
+#
+# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
+CONFIG_HAVE_AT91_UTMI=y
+CONFIG_HAVE_AT91_USB_CLK=y
+CONFIG_COMMON_CLK_AT91=y
+CONFIG_HAVE_AT91_H32MX=y
+CONFIG_HAVE_AT91_GENERATED_CLK=y
+CONFIG_HAVE_AT91_AUDIO_PLL=y
+CONFIG_HAVE_AT91_I2S_MUX_CLK=y
+CONFIG_HAVE_AT91_DDRAMC=y
+CONFIG_AT91_MCI_PBL=y
+CONFIG_AT91SAM9_SMC=y
+CONFIG_HAVE_AT91SAM9_RST=y
+CONFIG_SOC_SAMA5=y
+CONFIG_SOC_SAMA5D2=y
+CONFIG_ARCH_TEXT_BASE=0x23f00000
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_AT91_MULTI_BOARDS=y
+# CONFIG_MACH_AT91SAM9263EK is not set
+# CONFIG_MACH_AT91SAM9X5EK is not set
+# CONFIG_MACH_MICROCHIP_KSZ9477_EVB is not set
+CONFIG_MACH_SAMA5D27_SOM1=y
+CONFIG_MACH_SAMA5D27_GIANTBOARD=y
+
+#
+# AT91 Board Options
+#
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
+# CONFIG_BOARD_ARM_GENERIC_DT is not set
+CONFIG_AEABI=y
+# CONFIG_ARM_BOARD_APPEND_ATAG is not set
+# end of System Type
+
+#
+# ARM specific settings
+#
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_EXCEPTIONS=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_ARM_SEMIHOSTING is not set
+# CONFIG_ARM_PSCI is not set
+# CONFIG_ARM_PSCI_CLIENT is not set
+# end of ARM specific settings
+
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_MODULES=y
+CONFIG_HAS_CACHE=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_BLOCK=y
+CONFIG_BLOCK_WRITE=y
+CONFIG_FILETYPE=y
+CONFIG_BINFMT=y
+CONFIG_UIMAGE=y
+CONFIG_LOGBUF=y
+CONFIG_STDDEV=y
+CONFIG_MENUTREE=y
+CONFIG_BOOT=y
+
+#
+# General Settings
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_BANNER=y
+CONFIG_MEMINFO=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_GLOBALVAR=y
+CONFIG_NVVAR=y
+
+#
+# memory layout
+#
+CONFIG_HAVE_PBL_IMAGE=y
+CONFIG_HAVE_PBL_MULTI_IMAGES=y
+CONFIG_HAVE_IMAGE_COMPRESSION=y
+CONFIG_PBL_IMAGE=y
+CONFIG_PBL_MULTI_IMAGES=y
+CONFIG_PBL_RELOCATABLE=y
+CONFIG_IMAGE_COMPRESSION=y
+# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
+# CONFIG_IMAGE_COMPRESSION_LZO is not set
+# CONFIG_IMAGE_COMPRESSION_GZIP is not set
+# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
+CONFIG_IMAGE_COMPRESSION_NONE=y
+CONFIG_MMU=y
+CONFIG_MMU_EARLY=y
+CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
+CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
+CONFIG_STACK_SIZE=0x8000
+CONFIG_MALLOC_SIZE=0x0
+# end of memory layout
+
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_MALLOC_DLMALLOC is not set
+CONFIG_MALLOC_TLSF=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_KALLSYMS=y
+CONFIG_RELOCATABLE=y
+# CONFIG_PANIC_HANG is not set
+CONFIG_PROMPT="barebox:"
+CONFIG_BAUDRATE=115200
+CONFIG_CBSIZE=1024
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+# CONFIG_SHELL_NONE is not set
+CONFIG_GLOB=y
+CONFIG_GLOB_SORT=y
+CONFIG_PROMPT_HUSH_PS2="> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+# CONFIG_PASSWORD is not set
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_BOOTM=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+# CONFIG_BOOTM_INITRD is not set
+CONFIG_BOOTM_OFTREE=y
+CONFIG_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_BOOTM_AIMAGE is not set
+# CONFIG_BOOTM_ELF is not set
+# CONFIG_BOOTM_FITIMAGE is not set
+CONFIG_BLSPEC=y
+CONFIG_FLEXIBLE_BOOTARGS=y
+CONFIG_BAREBOX_UPDATE=y
+CONFIG_IMD=y
+CONFIG_IMD_TARGET=y
+# CONFIG_KERNEL_INSTALL_TARGET is not set
+CONFIG_CONSOLE_FULL=y
+# CONFIG_CONSOLE_SIMPLE is not set
+# CONFIG_CONSOLE_NONE is not set
+CONFIG_CONSOLE_ACTIVATE_FIRST=y
+# CONFIG_CONSOLE_ACTIVATE_ALL is not set
+# CONFIG_CONSOLE_ACTIVATE_NONE is not set
+CONFIG_CONSOLE_ALLOW_COLOR=y
+CONFIG_PBL_CONSOLE=y
+# CONFIG_CONSOLE_RATP is not set
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_PARTITION_DISK_DOS=y
+# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_ENV_HANDLING=y
+CONFIG_DEFAULT_ENVIRONMENT=y
+CONFIG_DEFAULT_COMPRESSION_BZIP2=y
+# CONFIG_DEFAULT_COMPRESSION_LZO is not set
+# CONFIG_DEFAULT_COMPRESSION_NONE is not set
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
+# CONFIG_BAREBOXENV_TARGET is not set
+# CONFIG_BAREBOXCRC32_TARGET is not set
+CONFIG_POLLER=y
+CONFIG_STATE=y
+# CONFIG_STATE_CRYPTO is not set
+# CONFIG_STATE_BACKWARD_COMPATIBLE is not set
+# CONFIG_BOOTCHOOSER is not set
+CONFIG_RESET_SOURCE=y
+# CONFIG_MACHINE_ID is not set
+
+#
+# OP-TEE loading
+#
+# CONFIG_BOOTM_OPTEE is not set
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+# end of General Settings
+
+#
+# Debugging
+#
+CONFIG_COMPILE_LOGLEVEL=6
+CONFIG_DEFAULT_LOGLEVEL=7
+# CONFIG_DEBUG_LL is not set
+CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
+# CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_PBL_BREAK is not set
+# CONFIG_UBSAN is not set
+# CONFIG_COMPILE_TEST is not set
+# end of Debugging
+
+CONFIG_HAS_DEBUG_LL=y
+CONFIG_COMMAND_SUPPORT=y
+CONFIG_COMPILE_HASH=y
+
+#
+# Commands
+#
+
+#
+# Information
+#
+CONFIG_CMD_AT91CLK=y
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_CMD_DEVINFO=y
+CONFIG_CMD_DMESG=y
+CONFIG_CMD_DRVINFO=y
+CONFIG_CMD_HELP=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_ARM_MMUINFO=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_VERSION=y
+# CONFIG_CMD_MMC is not set
+# CONFIG_CMD_MMC_EXTCSD is not set
+# CONFIG_CMD_POLLER is not set
+# end of Information
+
+#
+# Boot
+#
+CONFIG_CMD_AT91_BOOT_TEST=y
+CONFIG_CMD_BOOT=y
+CONFIG_CMD_BOOTM=y
+# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GO=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_LOADY is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+# end of Boot
+
+#
+# Partition
+#
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_AUTOMOUNT=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+# end of Partition
+
+#
+# Environment
+#
+CONFIG_CMD_NV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_DEFAULTENV=y
+CONFIG_CMD_GLOBAL=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+# end of Environment
+
+#
+# File
+#
+CONFIG_CMD_BASENAME=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_CP=y
+# CONFIG_CMD_CMP is not set
+CONFIG_CMD_DIGEST=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_LS=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_RMDIR=y
+CONFIG_CMD_SHA1SUM=y
+# CONFIG_CMD_SHA224SUM is not set
+# CONFIG_CMD_SHA256SUM is not set
+# CONFIG_CMD_SHA384SUM is not set
+# CONFIG_CMD_SHA512SUM is not set
+CONFIG_CMD_UNCOMPRESS=y
+# end of File
+
+#
+# Shell scripting
+#
+CONFIG_CMD_FALSE=y
+CONFIG_CMD_GETOPT=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_TRUE=y
+# end of Shell scripting
+
+#
+# Network
+#
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_HOST=y
+CONFIG_NET_CMD_IFUP=y
+# CONFIG_CMD_MIITOOL is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_IP_ROUTE_GET=y
+# end of Network
+
+#
+# Console and Framebuffer interaction
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+# CONFIG_CMD_LOGIN is not set
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_MENUTREE=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+# end of Console and Framebuffer interaction
+
+#
+# Memory
+#
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MD=y
+CONFIG_CMD_MEMCMP=y
+CONFIG_CMD_MEMCPY=y
+CONFIG_CMD_MEMSET=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_MW=y
+# end of Memory
+
+#
+# Hardware manipulation
+#
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_LED=y
+# CONFIG_CMD_POWEROFF is not set
+CONFIG_CMD_SPI=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_WD=y
+CONFIG_CMD_WD_DEFAULT_TIMOUT=0
+# end of Hardware manipulation
+
+#
+# Miscellaneous
+#
+# CONFIG_CMD_2048 is not set
+CONFIG_CMD_BAREBOX_UPDATE=y
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_FIRMWARELOAD is not set
+# CONFIG_CMD_OF_DIFF is not set
+CONFIG_CMD_OF_DUMP=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
+# CONFIG_CMD_OF_FIXUP_STATUS is not set
+# CONFIG_CMD_OF_OVERLAY is not set
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_STATE=y
+# CONFIG_CMD_DHRYSTONE is not set
+# CONFIG_CMD_SPD_DECODE is not set
+# CONFIG_CMD_SEED is not set
+# end of Miscellaneous
+# end of Commands
+
+CONFIG_NET=y
+CONFIG_NET_NFS=y
+# CONFIG_NET_NETCONSOLE is not set
+CONFIG_NET_RESOLV=y
+CONFIG_NET_IFUP=y
+CONFIG_NET_DHCP=y
+# CONFIG_NET_SNTP is not set
+
+#
+# Drivers
+#
+CONFIG_OFTREE=y
+CONFIG_OFTREE_MEM_GENERIC=y
+CONFIG_DTC=y
+CONFIG_OFDEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_OF_BAREBOX_ENV_IN_FS=y
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_AIODEV is not set
+
+#
+# serial drivers
+#
+# CONFIG_SERIAL_DEV_BUS is not set
+# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+# CONFIG_DRIVER_SERIAL_NS16550 is not set
+CONFIG_DRIVER_SERIAL_ATMEL=y
+# CONFIG_DRIVER_SERIAL_CADENCE is not set
+# end of serial drivers
+
+CONFIG_HAS_MACB=y
+CONFIG_PHYLIB=y
+
+#
+# Network drivers
+#
+# CONFIG_DRIVER_NET_ARC_EMAC is not set
+# CONFIG_DRIVER_NET_CALXEDA_XGMAC is not set
+# CONFIG_DRIVER_NET_DESIGNWARE is not set
+# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set
+# CONFIG_DRIVER_NET_ENC28J60 is not set
+# CONFIG_DRIVER_NET_FSL_FMAN is not set
+# CONFIG_DRIVER_NET_KS8851_MLL is not set
+CONFIG_DRIVER_NET_MACB=y
+CONFIG_DRIVER_NET_MICREL=y
+# CONFIG_DRIVER_NET_SMC911X is not set
+# CONFIG_DRIVER_NET_SMC91111 is not set
+
+#
+# phylib
+#
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AR8327N_PHY is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83867_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_NET_DSA_MV88E6XXX is not set
+
+#
+# MII bus device drivers
+#
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# end of phylib
+# end of Network drivers
+
+#
+# SPI drivers
+#
+CONFIG_SPI=y
+CONFIG_SPI_MEM=y
+# CONFIG_DRIVER_SPI_ATMEL is not set
+CONFIG_SPI_ATMEL_QUADSPI=y
+# CONFIG_DRIVER_SPI_FSL_QUADSPI is not set
+# CONFIG_DRIVER_SPI_GPIO is not set
+# end of SPI drivers
+
+CONFIG_I2C=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_MV64XXX is not set
+# end of I2C Hardware Bus support
+
+# CONFIG_I2C_MUX is not set
+CONFIG_MTD=y
+CONFIG_MTD_WRITE=y
+CONFIG_MTD_OOB_DEVICE=y
+# CONFIG_MTD_RAW_DEVICE is not set
+# CONFIG_MTD_CONCAT is not set
+
+#
+# MTD debug options
+#
+# CONFIG_MTD_PEB_DEBUG is not set
+
+#
+# Self contained MTD devices
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_DOCG3 is not set
+# CONFIG_MTD_MTDRAM is not set
+# end of Self contained MTD devices
+
+# CONFIG_DRIVER_CFI is not set
+# CONFIG_NAND is not set
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+# CONFIG_SPI_CADENCE_QUADSPI is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_DISK=y
+CONFIG_DISK_WRITE=y
+
+#
+# drive types
+#
+# CONFIG_DISK_ATA is not set
+# CONFIG_DISK_AHCI is not set
+
+#
+# interface types
+#
+# CONFIG_DISK_INTF_PLATFORM_IDE is not set
+# CONFIG_USB_HOST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_MUSB is not set
+# CONFIG_VIDEO is not set
+CONFIG_MCI_SDHCI=y
+CONFIG_MCI=y
+
+#
+# --- Feature list ---
+#
+# CONFIG_MCI_STARTUP is not set
+CONFIG_MCI_INFO=y
+CONFIG_MCI_WRITE=y
+CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+
+#
+# --- MCI host drivers ---
+#
+# CONFIG_MCI_DW is not set
+CONFIG_MCI_ATMEL=y
+CONFIG_MCI_ATMEL_SDHCI=y
+# CONFIG_MCI_ARASAN is not set
+# CONFIG_MCI_SPI is not set
+CONFIG_MCI_ATMEL_SDHCI_PBL=y
+CONFIG_HAVE_CLK=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_OF_PROVIDER=y
+
+#
+# Clocksource
+#
+CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
+CONFIG_CLOCKSOURCE_ATMEL_PIT=y
+CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
+# CONFIG_CLOCKSOURCE_DW_APB_TIMER is not set
+# end of Clocksource
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_ACT8846 is not set
+# CONFIG_MFD_DA9053 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_LP3972 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC34704 is not set
+# CONFIG_MFD_MC9SDZ60 is not set
+# CONFIG_MFD_STMPE is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_TWL4030 is not set
+# CONFIG_MFD_TWL6030 is not set
+# CONFIG_MFD_STPMIC1 is not set
+CONFIG_MFD_ATMEL_FLEXCOM=y
+# end of Multifunction device drivers
+
+#
+# Misc devices
+#
+# CONFIG_JTAG is not set
+# CONFIG_SRAM is not set
+CONFIG_STATE_DRV=y
+CONFIG_DEV_MEM=y
+# CONFIG_UBOOTVAR is not set
+# end of Misc devices
+
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+# CONFIG_LED_GPIO_RGB is not set
+# CONFIG_LED_GPIO_BICOLOR is not set
+CONFIG_LED_TRIGGERS=y
+# CONFIG_LED_PCA955X is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_AT24 is not set
+# end of EEPROM support
+
+#
+# Input device support
+#
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
+# end of Input device support
+
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_POLLER is not set
+CONFIG_WATCHDOG_AT91SAM9=y
+# CONFIG_WATCHDOG_DW is not set
+# CONFIG_PWM is not set
+# CONFIG_HWRNG is not set
+
+#
+# DMA support
+#
+# end of DMA support
+
+CONFIG_GPIOLIB=y
+
+#
+# GPIO
+#
+# CONFIG_GPIO_74164 is not set
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_DESIGNWARE is not set
+# CONFIG_GPIO_SX150X is not set
+# end of GPIO
+
+# CONFIG_W1 is not set
+
+#
+# Pin controllers
+#
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91PIO4=y
+# CONFIG_PINCTRL_SINGLE is not set
+# end of Pin controllers
+
+# CONFIG_NVMEM is not set
+
+#
+# Bus devices
+#
+# end of Bus devices
+
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED=y
+# CONFIG_REGULATOR_ANATOP is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_REMOTEPROC is not set
+# end of Remoteproc drivers
+
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
+# end of Firmware Drivers
+
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Memory controller drivers
+#
+# end of Memory controller drivers
+
+#
+# i.MX SoC drivers
+#
+# end of i.MX SoC drivers
+
+#
+# NVME Support
+#
+# end of NVME Support
+# end of Drivers
+
+#
+# Filesystem support
+#
+CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
+CONFIG_FS_AUTOMOUNT=y
+# CONFIG_FS_CRAMFS is not set
+CONFIG_FS_EXT4=y
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+# CONFIG_FS_JFFS2 is not set
+# CONFIG_FS_BPKFS is not set
+# CONFIG_FS_UIMAGEFS is not set
+# CONFIG_FS_PSTORE is not set
+# CONFIG_FS_SQUASHFS is not set
+
+#
+# ZLIB support disabled
+#
+
+#
+# LZ4 support disabled
+#
+
+#
+# LZO support disabled
+#
+
+#
+# XZ support disabled
+#
+
+#
+# ZSTD support disabled
+#
+# end of Filesystem support
+
+#
+# Library routines
+#
+CONFIG_PARAMETER=y
+CONFIG_UNCOMPRESS=y
+# CONFIG_ZLIB is not set
+CONFIG_BZLIB=y
+# CONFIG_LZ4_DECOMPRESS is not set
+# CONFIG_ZSTD_DECOMPRESS is not set
+# CONFIG_XZ_DECOMPRESS is not set
+# CONFIG_BASE64 is not set
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_FNMATCH=y
+CONFIG_QSORT=y
+# CONFIG_RATP is not set
+# CONFIG_ALLOW_PRNG_FALLBACK is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC8 is not set
+
+#
+# Library gui routines
+#
+# end of Library gui routines
+
+# CONFIG_BAREBOX_LOGO is not set
+# CONFIG_NLS is not set
+# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+# end of Library routines
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_MD5=y
+CONFIG_SHA1=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+# CONFIG_DIGEST_SHA1_ARM is not set
+# CONFIG_DIGEST_SHA256_ARM is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# end of Crypto support
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+# end of Firmware files
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
+# end of Host Tools
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
new file mode 100644
index 000000000000..3f636d86a633
--- /dev/null
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -0,0 +1,129 @@
+e6072dae533833bfa758a60d8e3b92b6
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCM283X is not set
+CONFIG_ARCH_TEXT_BASE=0x23f00000
+# CONFIG_ARM_AMBA is undefined
+# CONFIG_ARM_SECURE_MONITOR is undefined
+# CONFIG_ARM_SMCCC is undefined
+CONFIG_ARM_USE_COMPRESSED_DTB=y
+CONFIG_AT91SAM9_SMC=y
+CONFIG_AT91_MCI_PBL=y
+CONFIG_AT91_MULTI_BOARDS=y
+# CONFIG_BOARD_ARM_GENERIC_DT is not set
+CONFIG_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CLOCKSOURCE_ATMEL_PIT=y
+# CONFIG_CLOCKSOURCE_BCM283X is undefined
+CONFIG_CMD_AT91CLK=y
+CONFIG_CMD_AT91_BOOT_TEST=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+# CONFIG_CMD_MMC is not set
+# CONFIG_CMD_SMC is undefined
+# CONFIG_CMD_USB is undefined
+# CONFIG_CMD_USBGADGET is undefined
+CONFIG_COMMON_CLK_AT91=y
+CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMPILE_LOGLEVEL=6
+CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
+CONFIG_DEFAULT_COMPRESSION_BZIP2=y
+# CONFIG_DEFAULT_COMPRESSION_GZIP is undefined
+# CONFIG_DEFAULT_COMPRESSION_NONE is not set
+# CONFIG_DEFAULT_COMPRESSION_XZ is undefined
+CONFIG_DEFAULT_LOGLEVEL=7
+CONFIG_DRIVER_NET_MACB=y
+CONFIG_DRIVER_NET_MICREL=y
+CONFIG_DRIVER_SERIAL_ATMEL=y
+# CONFIG_DRIVER_SPI_ATMEL is not set
+# CONFIG_DRIVER_SPI_FSL_QUADSPI is not set
+# CONFIG_DRIVER_SPI_GPIO is not set
+# CONFIG_FILE_LIST is undefined
+# CONFIG_GPIO_PL061 is undefined
+# CONFIG_GPIO_RASPBERRYPI_EXP is undefined
+CONFIG_HAS_MACB=y
+CONFIG_HAVE_AT91SAM9_RST=y
+CONFIG_HAVE_AT91_AUDIO_PLL=y
+CONFIG_HAVE_AT91_DDRAMC=y
+CONFIG_HAVE_AT91_GENERATED_CLK=y
+CONFIG_HAVE_AT91_H32MX=y
+CONFIG_HAVE_AT91_I2S_MUX_CLK=y
+CONFIG_HAVE_AT91_USB_CLK=y
+CONFIG_HAVE_AT91_UTMI=y
+CONFIG_HAVE_MACH_ARM_HEAD=y
+# CONFIG_HWRNG is not set
+# CONFIG_I2C_ALGOBIT is undefined
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_IMAGE_COMPRESSION_LZO is not set
+CONFIG_IMAGE_COMPRESSION_NONE=y
+CONFIG_IMD_TARGET=y
+# CONFIG_KEYBOARD_USB is undefined
+# CONFIG_LIBFDT is undefined
+# CONFIG_MACH_AT91SAM9263EK is not set
+# CONFIG_MACH_AT91SAM9X5EK is not set
+# CONFIG_MACH_MICROCHIP_KSZ9477_EVB is not set
+# CONFIG_MACH_RPI2 is undefined
+# CONFIG_MACH_RPI3 is undefined
+# CONFIG_MACH_RPI is undefined
+# CONFIG_MACH_RPI_CM3 is undefined
+# CONFIG_MACH_RPI_COMMON is undefined
+CONFIG_MACH_SAMA5D27_GIANTBOARD=y
+CONFIG_MACH_SAMA5D27_SOM1=y
+CONFIG_MCI_ATMEL=y
+CONFIG_MCI_ATMEL_SDHCI=y
+CONFIG_MCI_ATMEL_SDHCI_PBL=y
+# CONFIG_MCI_BCM283X is undefined
+# CONFIG_MCI_BCM283X_SDHOST is undefined
+# CONFIG_MCI_MMCI is undefined
+CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+CONFIG_MCI_SDHCI=y
+# CONFIG_MCI_STARTUP is not set
+CONFIG_MFD_ATMEL_FLEXCOM=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_NET_USB is undefined
+# CONFIG_NET_USB_ASIX is undefined
+# CONFIG_NET_USB_SMSC95XX is undefined
+CONFIG_OF_BAREBOX_ENV_IN_FS=y
+CONFIG_PBL_CONSOLE=y
+CONFIG_PINCTRL_AT91PIO4=y
+# CONFIG_PINCTRL_BCM283X is undefined
+CONFIG_PROMPT="barebox:"
+# CONFIG_REGULATOR_ANATOP is not set
+# CONFIG_REGULATOR_BCM283X is undefined
+CONFIG_REGULATOR_FIXED=y
+# CONFIG_SERIAL_AMBA_PL011 is undefined
+CONFIG_SOC_SAMA5=y
+CONFIG_SOC_SAMA5D2=y
+CONFIG_SPI_ATMEL_QUADSPI=y
+# CONFIG_SPI_CADENCE_QUADSPI is not set
+CONFIG_SPI_MEM=y
+# CONFIG_THUMB2_BAREBOX is undefined
+# CONFIG_USB is undefined
+# CONFIG_USBGADGET_START is undefined
+# CONFIG_USB_DWC2_GADGET is undefined
+# CONFIG_USB_DWC2_HOST is undefined
+# CONFIG_USB_DWC3 is undefined
+# CONFIG_USB_EHCI is undefined
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_AUTOSTART is undefined
+# CONFIG_USB_GADGET_DFU is undefined
+# CONFIG_USB_GADGET_FASTBOOT is undefined
+# CONFIG_USB_GADGET_SERIAL is undefined
+# CONFIG_USB_HOST is not set
+# CONFIG_USB_HUB_USB251XB is undefined
+# CONFIG_USB_NET_AX88179_178A is undefined
+# CONFIG_USB_STORAGE is undefined
+# CONFIG_USB_ULPI is undefined
+# CONFIG_USB_XHCI is undefined
+CONFIG_WATCHDOG_AT91SAM9=y
+# CONFIG_WATCHDOG_BCM2835 is undefined
+# CONFIG_XZ_DECOMPRESS is not set
+# CONFIG_XZ_DEC_ARM is undefined
+# CONFIG_XZ_DEC_ARMTHUMB is undefined
+# CONFIG_XZ_DEC_IA64 is undefined
+# CONFIG_XZ_DEC_POWERPC is undefined
+# CONFIG_XZ_DEC_SPARC is undefined
+# CONFIG_XZ_DEC_X86 is undefined
+# CONFIG_ZLIB is not set
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 1120985ee8c9..139d0fd10965 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -172,6 +172,7 @@ PTXCONF_BAREBOX_COMMON_MD5="907dc813298fcded06fa9c788d3fb6c8"
 PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
 PTXCONF_BAREBOX_AM335X_MLO=y
 PTXCONF_BAREBOX_AM335X=y
+PTXCONF_BAREBOX_AT91=y
 PTXCONF_BAREBOX_MX6=y
 PTXCONF_BAREBOX_RPI2=y
 PTXCONF_BAREBOX_STM32MP=y
diff --git a/configs/platform-v7a/platforms/barebox-at91.in b/configs/platform-v7a/platforms/barebox-at91.in
new file mode 100644
index 000000000000..2d5bb9b4e6e9
--- /dev/null
+++ b/configs/platform-v7a/platforms/barebox-at91.in
@@ -0,0 +1,8 @@
+## SECTION=bootloader
+
+config BAREBOX_AT91
+	tristate
+	prompt "Barebox (at91)"
+	select BAREBOX_COMMON
+	help
+	  Barebox image for AT91 SoCs
diff --git a/configs/platform-v7a/rules/barebox-at91.make b/configs/platform-v7a/rules/barebox-at91.make
new file mode 100644
index 000000000000..25d6c3f4cba6
--- /dev/null
+++ b/configs/platform-v7a/rules/barebox-at91.make
@@ -0,0 +1,108 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Sascha Hauer <s.hauer@pengutronix.de>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_BAREBOX_AT91) += barebox-at91
+
+#
+# Paths and names
+#
+BAREBOX_AT91_VERSION		:= $(call remove_quotes,$(PTXCONF_BAREBOX_COMMON_VERSION))
+BAREBOX_AT91_MD5		:= $(call remove_quotes,$(PTXCONF_BAREBOX_COMMON_MD5))
+BAREBOX_AT91			:= barebox-$(BAREBOX_AT91_VERSION)
+BAREBOX_AT91_SUFFIX		:= tar.bz2
+BAREBOX_AT91_DIR		:= $(BUILDDIR)/barebox-at91-$(BAREBOX_AT91_VERSION)
+BAREBOX_AT91_CONFIG		:= $(call ptx/in-platformconfigdir, barebox-at91.config)
+BAREBOX_AT91_REF_CONFIG	:= $(call ptx/in-platformconfigdir, barebox.config)
+BAREBOX_AT91_LICENSE		:= GPL-2.0
+BAREBOX_AT91_URL		:= $(call barebox-url, BAREBOX_AT91)
+BAREBOX_AT91_SOURCE		:= $(SRCDIR)/$(BAREBOX_AT91).$(BAREBOX_AT91_SUFFIX)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+BAREBOX_AT91_WRAPPER_BLACKLIST := \
+	TARGET_HARDEN_RELRO \
+	TARGET_HARDEN_BINDNOW \
+	TARGET_HARDEN_PIE \
+	TARGET_DEBUG \
+	TARGET_BUILD_ID
+
+BAREBOX_AT91_CONF_ENV := KCONFIG_NOTIMESTAMP=1
+BAREBOX_AT91_CONF_OPT := $(call barebox-opts, BAREBOX_AT91)
+
+BAREBOX_AT91_MAKE_ENV := $(BAREBOX_AT91_CONF_ENV)
+BAREBOX_AT91_MAKE_OPT := $(BAREBOX_AT91_CONF_OPT)
+
+BAREBOX_AT91_IMAGES := \
+        images/barebox-sama5d27-som1-ek.img \
+        images/barebox-sama5d27-som1-ek-xload-mmc.img \
+        images/barebox-groboards-sama5d27-giantboard.img \
+        images/barebox-groboards-sama5d27-giantboard-xload-mmc.img
+
+BAREBOX_AT91_IMAGES := $(addprefix $(BAREBOX_AT91_DIR)/,$(BAREBOX_AT91_IMAGES))
+
+ifdef PTXCONF_BAREBOX_AT91
+$(BAREBOX_AT91_CONFIG):
+	@echo
+	@echo "****************************************************************************"
+	@echo " Please generate a bareboxconfig with 'ptxdist menuconfig barebox-at91'"
+	@echo "****************************************************************************"
+	@echo
+	@echo
+	@exit 1
+endif
+
+$(STATEDIR)/barebox-at91.prepare: $(BAREBOX_AT91_CONFIG)
+	@$(call targetinfo)
+	@rm -f "$(BAREBOX_AT91_DIR)/.ptxdist-defaultenv"
+	@ln -s "$(call ptx/in-platformconfigdir, barebox-at91-defaultenv)" \
+		"$(BAREBOX_AT91_DIR)/.ptxdist-defaultenv"
+	@$(call world/prepare, BAREBOX_AT91)
+	@$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-at91.install:
+	@$(call targetinfo)
+	@$(call touch)
+
+# ----------------------------------------------------------------------------
+# Targetinstall
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-at91.targetinstall:
+	@$(call targetinfo)
+	@$(foreach image, $(BAREBOX_AT91_IMAGES), \
+		install -m 644 \
+			$(image) $(IMAGEDIR)/$(notdir $(image));)
+	@$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-at91.clean:
+	@$(call targetinfo)
+	@$(call clean_pkg, BAREBOX_AT91)
+	@$(foreach image, $(BAREBOX_AT91_IMAGES), \
+		rm -fv $(IMAGEDIR)/$(notdir $(image))-at91;)
+
+# ----------------------------------------------------------------------------
+# oldconfig / menuconfig
+# ----------------------------------------------------------------------------
+
+barebox-at91_oldconfig barebox-at91_menuconfig barebox-at91_nconfig: $(STATEDIR)/barebox-at91.extract
+	@$(call world/kconfig, BAREBOX_AT91, $(subst barebox-at91_,,$@))
+
+# vim: syntax=make
-- 
2.28.0


_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de