From: Robert Schwebel <r.schwebel@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH 6/6] v7a: add stm32mp157c-dk2 SD-Card image
Date: Thu, 5 Mar 2020 17:46:16 +0100 [thread overview]
Message-ID: <20200305164616.hssteqblg753cgau@pengutronix.de> (raw)
In-Reply-To: <20200302110356.19112-7-a.fatoum@pengutronix.de>
On Mon, Mar 02, 2020 at 12:03:56PM +0100, Ahmad Fatoum wrote:
> Both STM32MP BootROM and TF-A expect the subsequent bootloader stage to
> come from a GPT partition when booting from SD-Card.
> Add a genimage config that describes this.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> .../platform-v7a/config/images/stm32mp.config | 31 +++++++++++++++
> configs/platform-v7a/platformconfig | 4 +-
> .../platforms/blspec-stm32mp157c-dk2.in | 5 +++
> .../platforms/image-stm32mp157c-dk2.in | 11 ++++++
> .../loader/entries/stm32mp157c-dk2.conf | 6 +++
> .../rules/blspec-stm32mp157c-dk2.make | 36 ++++++++++++++++++
> .../rules/image-stm32mp157c-dk2.make | 38 +++++++++++++++++++
> 7 files changed, 130 insertions(+), 1 deletion(-)
> create mode 100644 configs/platform-v7a/config/images/stm32mp.config
> create mode 100644 configs/platform-v7a/platforms/blspec-stm32mp157c-dk2.in
> create mode 100644 configs/platform-v7a/platforms/image-stm32mp157c-dk2.in
> create mode 100644 configs/platform-v7a/projectroot/loader/entries/stm32mp157c-dk2.conf
> create mode 100644 configs/platform-v7a/rules/blspec-stm32mp157c-dk2.make
> create mode 100644 configs/platform-v7a/rules/image-stm32mp157c-dk2.make
Applied to next.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
prev parent reply other threads:[~2020-03-05 16:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-02 11:03 [DistroKit] [PATCH 0/6] v7a: add basic STM32MP157C-DK2 support Ahmad Fatoum
2020-03-02 11:03 ` [DistroKit] [PATCH 1/6] v7a: kernel: configure for STM32MP157 support Ahmad Fatoum
2020-03-05 16:43 ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 2/6] v7a: barebox: add new stm32mp rule Ahmad Fatoum
2020-03-03 9:43 ` Roland Hieber
2020-03-03 9:54 ` Ahmad Fatoum
2020-03-05 16:44 ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 3/6] rules: add ARM Trusted Firmware-A Ahmad Fatoum
2020-03-05 16:44 ` Robert Schwebel
2020-03-05 17:28 ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 4/6] v7a: stm32mp: enable TF-A for first stage Ahmad Fatoum
2020-03-05 16:45 ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 5/6] datapartition: disable autoformat of non-MBR Linux partitions Ahmad Fatoum
2020-03-05 16:45 ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 6/6] v7a: add stm32mp157c-dk2 SD-Card image Ahmad Fatoum
2020-03-03 12:08 ` Roland Hieber
2020-03-05 16:46 ` Robert Schwebel
2020-03-05 16:46 ` Robert Schwebel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200305164616.hssteqblg753cgau@pengutronix.de \
--to=r.schwebel@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox