DistroKit Mailinglist
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [DistroKit] [PATCH 2/6] v7a: barebox: add new stm32mp rule
Date: Mon,  2 Mar 2020 12:03:52 +0100	[thread overview]
Message-ID: <20200302110356.19112-3-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20200302110356.19112-1-a.fatoum@pengutronix.de>

Since v2019.12.0, barebox now has SD/MMC and Ethernet support for the
STM32MP1.  Thus there is nothing holding us back from extending
DistroKit's v7a platform to support the SoC. Add a barebox-stm32mp
rule as first step.

The barebox rule add here is only meant as second-stage bootloader
(SSBL). First-stage (FSBL) will be TF-A introduced in a later patch.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 .../init/bootsource                           |   9 +
 configs/platform-v7a/barebox-stm32mp.config   | 781 ++++++++++++++++++
 .../platform-v7a/barebox-stm32mp.config.diff  | 147 ++++
 configs/platform-v7a/platformconfig           |   1 +
 .../platform-v7a/platforms/barebox-stm32mp.in |   8 +
 .../platform-v7a/rules/barebox-stm32mp.make   | 107 +++
 6 files changed, 1053 insertions(+)
 create mode 100755 configs/platform-v7a/barebox-stm32mp-defaultenv/init/bootsource
 create mode 100644 configs/platform-v7a/barebox-stm32mp.config
 create mode 100644 configs/platform-v7a/barebox-stm32mp.config.diff
 create mode 100644 configs/platform-v7a/platforms/barebox-stm32mp.in
 create mode 100644 configs/platform-v7a/rules/barebox-stm32mp.make

diff --git a/configs/platform-v7a/barebox-stm32mp-defaultenv/init/bootsource b/configs/platform-v7a/barebox-stm32mp-defaultenv/init/bootsource
new file mode 100755
index 000000000000..b529384e939b
--- /dev/null
+++ b/configs/platform-v7a/barebox-stm32mp-defaultenv/init/bootsource
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if [ -n "$nv.boot.default" ]; then
+	exit
+fi
+
+if [ $bootsource = mmc ]; then
+	global.boot.default="mmc${bootsource_instance}.root net"
+fi
diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config
new file mode 100644
index 000000000000..5b532804ffb7
--- /dev/null
+++ b/configs/platform-v7a/barebox-stm32mp.config
@@ -0,0 +1,781 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Barebox/arm 2020.02.0-20200302-1 Configuration
+#
+CONFIG_ARM=y
+CONFIG_ARM_LINUX=y
+CONFIG_ARM_USE_COMPRESSED_DTB=y
+CONFIG_TEXT_BASE=0x0
+
+#
+# System Type
+#
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCM283X is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DIGIC is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_SOCFPGA is not set
+# CONFIG_ARCH_S3C24xx is not set
+# CONFIG_ARCH_S5PCxx is not set
+# CONFIG_ARCH_S3C64xx is not set
+CONFIG_ARCH_STM32MP=y
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_UEMD is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
+# CONFIG_ARCH_QEMU is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+
+#
+# processor features
+#
+# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
+CONFIG_ARCH_NR_GPIO=416
+CONFIG_ARCH_STM32MP157=y
+CONFIG_MACH_STM32MP157C_DK2=y
+# CONFIG_BOARD_ARM_GENERIC_DT is not set
+CONFIG_ARM_ASM_UNIFIED=y
+CONFIG_AEABI=y
+CONFIG_THUMB2_BAREBOX=y
+CONFIG_ARM_BOARD_APPEND_ATAG=y
+# CONFIG_ARM_BOARD_PREPEND_ATAG is not set
+# end of System Type
+
+#
+# ARM specific settings
+#
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_EXCEPTIONS=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_ARM_SEMIHOSTING is not set
+CONFIG_ARM_SMCCC=y
+CONFIG_ARM_PSCI_OF=y
+# CONFIG_ARM_PSCI is not set
+CONFIG_ARM_PSCI_CLIENT=y
+# end of ARM specific settings
+
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_MODULES=y
+CONFIG_HAS_CACHE=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_BLOCK=y
+CONFIG_BLOCK_WRITE=y
+CONFIG_FILETYPE=y
+CONFIG_BINFMT=y
+CONFIG_UIMAGE=y
+CONFIG_LOGBUF=y
+CONFIG_STDDEV=y
+CONFIG_BAREBOX_UPDATE=y
+CONFIG_MENUTREE=y
+CONFIG_BOOT=y
+
+#
+# General Settings
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_BANNER=y
+CONFIG_MEMINFO=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_GLOBALVAR=y
+CONFIG_NVVAR=y
+
+#
+# memory layout
+#
+CONFIG_HAVE_PBL_IMAGE=y
+CONFIG_HAVE_PBL_MULTI_IMAGES=y
+CONFIG_HAVE_IMAGE_COMPRESSION=y
+CONFIG_PBL_IMAGE=y
+CONFIG_PBL_MULTI_IMAGES=y
+CONFIG_PBL_RELOCATABLE=y
+CONFIG_IMAGE_COMPRESSION=y
+# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
+CONFIG_IMAGE_COMPRESSION_LZO=y
+# CONFIG_IMAGE_COMPRESSION_GZIP is not set
+# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
+# CONFIG_IMAGE_COMPRESSION_NONE is not set
+CONFIG_MMU=y
+CONFIG_MMU_EARLY=y
+CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
+CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
+CONFIG_STACK_SIZE=0x8000
+CONFIG_MALLOC_SIZE=0x0
+# end of memory layout
+
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_MALLOC_DLMALLOC is not set
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_RELOCATABLE=y
+# CONFIG_PANIC_HANG is not set
+CONFIG_PROMPT="barebox:"
+CONFIG_BAUDRATE=115200
+CONFIG_CBSIZE=1024
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+# CONFIG_SHELL_NONE is not set
+CONFIG_GLOB=y
+CONFIG_GLOB_SORT=y
+CONFIG_PROMPT_HUSH_PS2="> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+# CONFIG_PASSWORD is not set
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_BOOTM=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
+CONFIG_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_BOOTM_AIMAGE is not set
+# CONFIG_BOOTM_FITIMAGE is not set
+# CONFIG_BOOTM_OPTEE is not set
+CONFIG_BLSPEC=y
+CONFIG_FLEXIBLE_BOOTARGS=y
+CONFIG_IMD=y
+# CONFIG_IMD_TARGET is not set
+# CONFIG_KERNEL_INSTALL_TARGET is not set
+CONFIG_CONSOLE_FULL=y
+# CONFIG_CONSOLE_SIMPLE is not set
+# CONFIG_CONSOLE_NONE is not set
+# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+# CONFIG_CONSOLE_ACTIVATE_ALL is not set
+CONFIG_CONSOLE_ACTIVATE_NONE=y
+CONFIG_CONSOLE_ALLOW_COLOR=y
+CONFIG_PBL_CONSOLE=y
+# CONFIG_CONSOLE_RATP is not set
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_PARTITION_DISK_DOS=y
+CONFIG_PARTITION_DISK_EFI=y
+# CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE is not set
+# CONFIG_PARTITION_DISK_EFI_GPT_COMPARE is not set
+CONFIG_ENV_HANDLING=y
+CONFIG_DEFAULT_ENVIRONMENT=y
+# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
+# CONFIG_DEFAULT_COMPRESSION_LZO is not set
+CONFIG_DEFAULT_COMPRESSION_NONE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
+# CONFIG_BAREBOXENV_TARGET is not set
+# CONFIG_BAREBOXCRC32_TARGET is not set
+CONFIG_POLLER=y
+# CONFIG_STATE is not set
+# CONFIG_BOOTCHOOSER is not set
+CONFIG_RESET_SOURCE=y
+# end of General Settings
+
+#
+# Debugging
+#
+CONFIG_COMPILE_LOGLEVEL=6
+CONFIG_DEFAULT_LOGLEVEL=7
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_PBL_BREAK is not set
+# CONFIG_UBSAN is not set
+CONFIG_UBSAN_ALIGNMENT=y
+# end of Debugging
+
+CONFIG_HAS_DEBUG_LL=y
+CONFIG_COMMAND_SUPPORT=y
+CONFIG_COMPILE_HASH=y
+
+#
+# Commands
+#
+
+#
+# Information
+#
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_CMD_DEVINFO=y
+CONFIG_CMD_DMESG=y
+CONFIG_CMD_DRVINFO=y
+CONFIG_CMD_HELP=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_ARM_MMUINFO=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_VERSION=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_MMC_EXTCSD is not set
+# end of Information
+
+#
+# Boot
+#
+CONFIG_CMD_BOOT=y
+CONFIG_CMD_BOOTM=y
+# CONFIG_CMD_BOOTU is not set
+# CONFIG_CMD_BOOTZ is not set
+CONFIG_CMD_GO=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_LOADY is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+# end of Boot
+
+#
+# Partition
+#
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_AUTOMOUNT=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+# end of Partition
+
+#
+# Environment
+#
+CONFIG_CMD_NV=y
+CONFIG_CMD_EXPORT=y
+# CONFIG_CMD_DEFAULTENV is not set
+CONFIG_CMD_GLOBAL=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+# end of Environment
+
+#
+# File
+#
+CONFIG_CMD_BASENAME=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_CP=y
+# CONFIG_CMD_CMP is not set
+CONFIG_CMD_DIGEST=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_LS=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_RMDIR=y
+# CONFIG_CMD_SHA1SUM is not set
+# CONFIG_CMD_SHA224SUM is not set
+# CONFIG_CMD_SHA256SUM is not set
+# CONFIG_CMD_SHA384SUM is not set
+# CONFIG_CMD_SHA512SUM is not set
+CONFIG_CMD_UNCOMPRESS=y
+# end of File
+
+#
+# Shell scripting
+#
+CONFIG_CMD_FALSE=y
+CONFIG_CMD_GETOPT=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_TRUE=y
+# end of Shell scripting
+
+#
+# Network
+#
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_HOST=y
+CONFIG_NET_CMD_IFUP=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_IP_ROUTE_GET=y
+# end of Network
+
+#
+# Console and Framebuffer interaction
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+# CONFIG_CMD_LOGIN is not set
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_MENUTREE=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+# end of Console and Framebuffer interaction
+
+#
+# Memory
+#
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MD=y
+CONFIG_CMD_MEMCMP=y
+CONFIG_CMD_MEMCPY=y
+CONFIG_CMD_MEMSET=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_MW=y
+# end of Memory
+
+#
+# Hardware manipulation
+#
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_I2C is not set
+CONFIG_CMD_LED=y
+CONFIG_CMD_POWEROFF=y
+# CONFIG_CMD_SMC is not set
+CONFIG_CMD_WD=y
+CONFIG_CMD_WD_DEFAULT_TIMOUT=0
+# end of Hardware manipulation
+
+#
+# Miscellaneous
+#
+# CONFIG_CMD_2048 is not set
+CONFIG_CMD_BAREBOX_UPDATE=y
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_FIRMWARELOAD is not set
+# CONFIG_CMD_OF_DIFF is not set
+CONFIG_CMD_OF_DUMP=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
+# CONFIG_CMD_OF_FIXUP_STATUS is not set
+# CONFIG_CMD_OF_OVERLAY is not set
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_DHRYSTONE is not set
+# CONFIG_CMD_SPD_DECODE is not set
+# CONFIG_CMD_SEED is not set
+# end of Miscellaneous
+# end of Commands
+
+CONFIG_NET=y
+# CONFIG_NET_NFS is not set
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
+CONFIG_NET_IFUP=y
+CONFIG_NET_DHCP=y
+# CONFIG_NET_SNTP is not set
+
+#
+# Drivers
+#
+CONFIG_OFTREE=y
+CONFIG_OFTREE_MEM_GENERIC=y
+CONFIG_DTC=y
+CONFIG_OFDEVICE=y
+CONFIG_OF_NET=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+# CONFIG_OF_BAREBOX_ENV_IN_FS is not set
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_AIODEV is not set
+CONFIG_ARM_AMBA=y
+
+#
+# serial drivers
+#
+# CONFIG_SERIAL_DEV_BUS is not set
+# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+CONFIG_DRIVER_SERIAL_STM32=y
+# CONFIG_DRIVER_SERIAL_NS16550 is not set
+# CONFIG_DRIVER_SERIAL_CADENCE is not set
+# end of serial drivers
+
+CONFIG_PHYLIB=y
+
+#
+# Network drivers
+#
+# CONFIG_DRIVER_NET_ARC_EMAC is not set
+# CONFIG_DRIVER_NET_CALXEDA_XGMAC is not set
+# CONFIG_DRIVER_NET_DESIGNWARE is not set
+CONFIG_DRIVER_NET_DESIGNWARE_EQOS=y
+CONFIG_DRIVER_NET_DESIGNWARE_STM32=y
+# CONFIG_DRIVER_NET_DESIGNWARE_TEGRA186 is not set
+# CONFIG_DRIVER_NET_FSL_FMAN is not set
+# CONFIG_DRIVER_NET_KS8851_MLL is not set
+# CONFIG_DRIVER_NET_SMC911X is not set
+# CONFIG_DRIVER_NET_SMC91111 is not set
+
+#
+# phylib
+#
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AR8327N_PHY is not set
+CONFIG_AT803X_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83867_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_NET_DSA_MV88E6XXX is not set
+
+#
+# MII bus device drivers
+#
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# end of phylib
+# end of Network drivers
+
+#
+# SPI drivers
+#
+# CONFIG_SPI is not set
+# end of SPI drivers
+
+CONFIG_I2C=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_MV64XXX is not set
+CONFIG_I2C_STM32=y
+# end of I2C Hardware Bus support
+
+# CONFIG_I2C_MUX is not set
+# CONFIG_MTD is not set
+CONFIG_DISK=y
+CONFIG_DISK_WRITE=y
+
+#
+# drive types
+#
+# CONFIG_DISK_ATA is not set
+# CONFIG_DISK_AHCI is not set
+
+#
+# interface types
+#
+# CONFIG_DISK_INTF_PLATFORM_IDE is not set
+# CONFIG_USB_HOST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_MUSB is not set
+# CONFIG_VIDEO is not set
+CONFIG_MCI=y
+
+#
+# --- Feature list ---
+#
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_INFO=y
+CONFIG_MCI_WRITE=y
+# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+
+#
+# --- MCI host drivers ---
+#
+# CONFIG_MCI_DW is not set
+# CONFIG_MCI_MMCI is not set
+# CONFIG_MCI_ARASAN is not set
+CONFIG_MCI_STM32_SDMMC2=y
+CONFIG_HAVE_CLK=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_OF_PROVIDER=y
+
+#
+# Clocksource
+#
+CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
+CONFIG_CLOCKSOURCE_ARMV8_TIMER=y
+# CONFIG_CLOCKSOURCE_DW_APB_TIMER is not set
+# end of Clocksource
+
+#
+# MFD
+#
+# CONFIG_MFD_ACT8846 is not set
+# CONFIG_MFD_DA9053 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_LP3972 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC34704 is not set
+# CONFIG_MFD_MC9SDZ60 is not set
+# CONFIG_MFD_STMPE is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_TWL4030 is not set
+# CONFIG_MFD_TWL6030 is not set
+CONFIG_MFD_STPMIC1=y
+# CONFIG_FINTEK_SUPERIO is not set
+# CONFIG_SMSC_SUPERIO is not set
+# end of MFD
+
+#
+# Misc devices
+#
+# CONFIG_JTAG is not set
+# CONFIG_SRAM is not set
+CONFIG_DEV_MEM=y
+# CONFIG_UBOOTVAR is not set
+# end of Misc devices
+
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+# CONFIG_LED_GPIO_RGB is not set
+# CONFIG_LED_GPIO_BICOLOR is not set
+# CONFIG_LED_TRIGGERS is not set
+# CONFIG_LED_PCA955X is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# end of EEPROM support
+
+#
+# Input device support
+#
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
+# end of Input device support
+
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_POLLER=y
+# CONFIG_WATCHDOG_DW is not set
+CONFIG_STM32_IWDG_WATCHDOG=y
+# CONFIG_STPMIC1_WATCHDOG is not set
+# CONFIG_PWM is not set
+# CONFIG_HWRNG is not set
+
+#
+# DMA support
+#
+# end of DMA support
+
+CONFIG_GPIOLIB=y
+
+#
+# GPIO
+#
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_PL061 is not set
+# CONFIG_GPIO_DESIGNWARE is not set
+# CONFIG_GPIO_SX150X is not set
+# end of GPIO
+
+# CONFIG_W1 is not set
+
+#
+# Pin controllers
+#
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_STM32=y
+# end of Pin controllers
+
+CONFIG_NVMEM=y
+# CONFIG_NVMEM_SNVS_LPGPR is not set
+CONFIG_STM32_BSEC=y
+
+#
+# Bus devices
+#
+# end of Bus devices
+
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED=y
+CONFIG_REGULATOR_STPMIC1=y
+# CONFIG_REGULATOR_ANATOP is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_REMOTEPROC is not set
+# end of Remoteproc drivers
+
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_IMX7 is not set
+CONFIG_RESET_STM32=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# Firmware Drivers
+#
+# end of Firmware Drivers
+
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Memory controller drivers
+#
+# end of Memory controller drivers
+
+#
+# i.MX SoC drivers
+#
+# end of i.MX SoC drivers
+
+#
+# NVME Support
+#
+# end of NVME Support
+# end of Drivers
+
+#
+# Filesystem support
+#
+CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
+CONFIG_FS_AUTOMOUNT=y
+# CONFIG_FS_CRAMFS is not set
+CONFIG_FS_EXT4=y
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+# CONFIG_FS_BPKFS is not set
+# CONFIG_FS_UIMAGEFS is not set
+# CONFIG_FS_PSTORE is not set
+# CONFIG_FS_SQUASHFS is not set
+
+#
+# ZLIB support disabled
+#
+
+#
+# LZ4 support disabled
+#
+
+#
+# LZO support disabled
+#
+
+#
+# XZ support disabled
+#
+
+#
+# ZSTD support disabled
+#
+# end of Filesystem support
+
+#
+# Library routines
+#
+CONFIG_PARAMETER=y
+CONFIG_UNCOMPRESS=y
+CONFIG_ZLIB=y
+# CONFIG_BZLIB is not set
+# CONFIG_LZ4_DECOMPRESS is not set
+# CONFIG_ZSTD_DECOMPRESS is not set
+# CONFIG_XZ_DECOMPRESS is not set
+# CONFIG_BASE64 is not set
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_FNMATCH=y
+CONFIG_QSORT=y
+# CONFIG_RATP is not set
+# CONFIG_ALLOW_PRNG_FALLBACK is not set
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC8=y
+
+#
+# Library gui routines
+#
+# end of Library gui routines
+
+# CONFIG_BAREBOX_LOGO is not set
+CONFIG_PRINTF_UUID=y
+# CONFIG_NLS is not set
+# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+# end of Library routines
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_MD5=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+# CONFIG_DIGEST_SHA1_GENERIC is not set
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+# CONFIG_DIGEST_SHA1_ARM is not set
+# CONFIG_DIGEST_SHA256_ARM is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# end of Crypto support
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+# end of Firmware files
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
+# end of Host Tools
diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
new file mode 100644
index 000000000000..ae685bc0303f
--- /dev/null
+++ b/configs/platform-v7a/barebox-stm32mp.config.diff
@@ -0,0 +1,147 @@
+3535341c60838c5a3a5b02da35648d4a
+# CONFIG_ARCH_BCM283X is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_NR_GPIO=416
+CONFIG_ARCH_STM32MP157=y
+CONFIG_ARCH_STM32MP=y
+# CONFIG_ARCH_TEXT_BASE is undefined
+CONFIG_ARM_ASM_UNIFIED=y
+CONFIG_ARM_BOARD_APPEND_ATAG=y
+# CONFIG_ARM_BOARD_PREPEND_ATAG is not set
+CONFIG_ARM_PSCI_CLIENT=y
+CONFIG_ARM_PSCI_OF=y
+# CONFIG_ARM_SECURE_MONITOR is undefined
+CONFIG_ARM_USE_COMPRESSED_DTB=y
+CONFIG_AT803X_PHY=y
+# CONFIG_BOARD_ARM_GENERIC_DT is not set
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_BZLIB is not set
+# CONFIG_CLOCKSOURCE_BCM283X is undefined
+# CONFIG_CMD_BOOTZ is not set
+# CONFIG_CMD_DEFAULTENV is not set
+# CONFIG_CMD_I2C is not set
+# CONFIG_CMD_LED_TRIGGER is undefined
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_POWEROFF=y
+# CONFIG_CMD_SHA1SUM is not set
+# CONFIG_CMD_SPI is undefined
+# CONFIG_CMD_STATE is undefined
+# CONFIG_CMD_USB is undefined
+# CONFIG_CMD_USBGADGET is undefined
+CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMPILE_LOGLEVEL=6
+# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+CONFIG_CONSOLE_ACTIVATE_NONE=y
+CONFIG_CRC8=y
+# CONFIG_DEFAULT_COMPRESSION_BZIP2 is undefined
+# CONFIG_DEFAULT_COMPRESSION_XZ is undefined
+CONFIG_DEFAULT_LOGLEVEL=7
+# CONFIG_DIGEST_SHA1_GENERIC is not set
+# CONFIG_DRIVER_CFI is undefined
+CONFIG_DRIVER_NET_DESIGNWARE_EQOS=y
+CONFIG_DRIVER_NET_DESIGNWARE_STM32=y
+# CONFIG_DRIVER_NET_DESIGNWARE_TEGRA186 is not set
+# CONFIG_DRIVER_NET_ENC28J60 is undefined
+# CONFIG_DRIVER_NET_MICREL is undefined
+CONFIG_DRIVER_SERIAL_STM32=y
+# CONFIG_DRIVER_SPI_GPIO is undefined
+# CONFIG_EEPROM_AT25 is undefined
+# CONFIG_FILE_LIST is undefined
+# CONFIG_FIRMWARE_ALTERA_SERIAL is undefined
+# CONFIG_GPIO_74164 is undefined
+# CONFIG_GPIO_RASPBERRYPI_EXP is undefined
+# CONFIG_HWRNG is not set
+# CONFIG_I2C_ALGOBIT is undefined
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_STM32=y
+# CONFIG_KEYBOARD_USB is undefined
+# CONFIG_LED_TRIGGERS is not set
+# CONFIG_LIBFDT is undefined
+# CONFIG_MACHINE_ID is undefined
+# CONFIG_MACH_RPI2 is undefined
+# CONFIG_MACH_RPI3 is undefined
+# CONFIG_MACH_RPI is undefined
+# CONFIG_MACH_RPI_CM3 is undefined
+# CONFIG_MACH_RPI_COMMON is undefined
+CONFIG_MACH_STM32MP157C_DK2=y
+# CONFIG_MCI_BCM283X is undefined
+# CONFIG_MCI_BCM283X_SDHOST is undefined
+# CONFIG_MCI_MMCI is not set
+# CONFIG_MCI_SPI is undefined
+CONFIG_MCI_STM32_SDMMC2=y
+CONFIG_MFD_STPMIC1=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MICREL_PHY=y
+# CONFIG_MTD is not set
+# CONFIG_MTD_CONCAT is undefined
+# CONFIG_MTD_DATAFLASH is undefined
+# CONFIG_MTD_DOCG3 is undefined
+# CONFIG_MTD_M25P80 is undefined
+# CONFIG_MTD_MTDRAM is undefined
+# CONFIG_MTD_OOB_DEVICE is undefined
+# CONFIG_MTD_PEB_DEBUG is undefined
+# CONFIG_MTD_RAW_DEVICE is undefined
+# CONFIG_MTD_SPI_NOR is undefined
+# CONFIG_MTD_UBI is undefined
+# CONFIG_MTD_WRITE is undefined
+# CONFIG_NAND is undefined
+CONFIG_NET_NETCONSOLE=y
+# CONFIG_NET_NFS is not set
+# CONFIG_NET_USB is undefined
+# CONFIG_NET_USB_ASIX is undefined
+# CONFIG_NET_USB_SMSC95XX is undefined
+CONFIG_NVMEM=y
+# CONFIG_NVMEM_SNVS_LPGPR is not set
+CONFIG_PARTITION_DISK_EFI=y
+# CONFIG_PARTITION_DISK_EFI_GPT_COMPARE is not set
+# CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE is not set
+CONFIG_PBL_CONSOLE=y
+# CONFIG_PINCTRL_BCM283X is undefined
+CONFIG_PINCTRL_STM32=y
+CONFIG_PRINTF_UUID=y
+CONFIG_PROMPT="barebox:"
+# CONFIG_REGULATOR_ANATOP is not set
+# CONFIG_REGULATOR_BCM283X is undefined
+CONFIG_REGULATOR_FIXED=y
+CONFIG_REGULATOR_STPMIC1=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_IMX7 is not set
+CONFIG_RESET_STM32=y
+# CONFIG_SHA1 is undefined
+# CONFIG_SPI is not set
+# CONFIG_SPI_MEM is undefined
+# CONFIG_STATE is not set
+# CONFIG_STATE_BACKWARD_COMPATIBLE is undefined
+# CONFIG_STATE_CRYPTO is undefined
+# CONFIG_STATE_DRV is undefined
+CONFIG_STM32_BSEC=y
+CONFIG_STM32_IWDG_WATCHDOG=y
+# CONFIG_STPMIC1_WATCHDOG is not set
+CONFIG_THUMB2_BAREBOX=y
+# CONFIG_USB is undefined
+# CONFIG_USBGADGET_START is undefined
+# CONFIG_USB_DWC2_HOST is undefined
+# CONFIG_USB_DWC3 is undefined
+# CONFIG_USB_EHCI is undefined
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_AUTOSTART is undefined
+# CONFIG_USB_GADGET_DFU is undefined
+# CONFIG_USB_GADGET_FASTBOOT is undefined
+# CONFIG_USB_GADGET_FASTBOOT_SPARSE is undefined
+# CONFIG_USB_GADGET_SERIAL is undefined
+# CONFIG_USB_HOST is not set
+# CONFIG_USB_HUB_USB251XB is undefined
+# CONFIG_USB_STORAGE is undefined
+# CONFIG_USB_ULPI is undefined
+# CONFIG_USB_XHCI is undefined
+# CONFIG_WATCHDOG_BCM2835 is undefined
+CONFIG_WATCHDOG_POLLER=y
+# CONFIG_XZ_DECOMPRESS is not set
+# CONFIG_XZ_DEC_ARM is undefined
+# CONFIG_XZ_DEC_ARMTHUMB is undefined
+# CONFIG_XZ_DEC_IA64 is undefined
+# CONFIG_XZ_DEC_POWERPC is undefined
+# CONFIG_XZ_DEC_SPARC is undefined
+# CONFIG_XZ_DEC_X86 is undefined
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 3a0bab50c4ee..f468a77e4f96 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -173,6 +173,7 @@ PTXCONF_BAREBOX_AM335X_MLO=y
 PTXCONF_BAREBOX_AM335X=y
 PTXCONF_BAREBOX_MX6=y
 PTXCONF_BAREBOX_RPI2=y
+PTXCONF_BAREBOX_STM32MP=y
 PTXCONF_BAREBOX_VEXPRESS=y
 PTXCONF_BAREBOX_ARCH_STRING="arm"
 # PTXCONF_BAREBOX is not set
diff --git a/configs/platform-v7a/platforms/barebox-stm32mp.in b/configs/platform-v7a/platforms/barebox-stm32mp.in
new file mode 100644
index 000000000000..6fc59546d8f4
--- /dev/null
+++ b/configs/platform-v7a/platforms/barebox-stm32mp.in
@@ -0,0 +1,8 @@
+## SECTION=bootloader
+
+config BAREBOX_STM32MP
+	tristate
+	prompt "Barebox (stm32mp)"
+	select BAREBOX_COMMON
+	help
+	  Barebox image for STM32MP
diff --git a/configs/platform-v7a/rules/barebox-stm32mp.make b/configs/platform-v7a/rules/barebox-stm32mp.make
new file mode 100644
index 000000000000..962409696483
--- /dev/null
+++ b/configs/platform-v7a/rules/barebox-stm32mp.make
@@ -0,0 +1,107 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Sascha Hauer <s.hauer@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_BAREBOX_STM32MP) += barebox-stm32mp
+
+#
+# Paths and names
+#
+BAREBOX_STM32MP_VERSION		:= $(call remove_quotes,$(PTXCONF_BAREBOX_COMMON_VERSION))
+BAREBOX_STM32MP_MD5		:= $(call remove_quotes,$(PTXCONF_BAREBOX_COMMON_MD5))
+BAREBOX_STM32MP			:= barebox-$(BAREBOX_STM32MP_VERSION)
+BAREBOX_STM32MP_SUFFIX		:= tar.bz2
+BAREBOX_STM32MP_DIR		:= $(BUILDDIR)/barebox-stm32mp-$(BAREBOX_STM32MP_VERSION)
+BAREBOX_STM32MP_CONFIG		:= $(call ptx/in-platformconfigdir, barebox-stm32mp.config)
+BAREBOX_STM32MP_REF_CONFIG	:= $(call ptx/in-platformconfigdir, barebox.config)
+BAREBOX_STM32MP_LICENSE		:= GPL-2.0
+BAREBOX_STM32MP_URL		:= $(call barebox-url, BAREBOX_STM32MP)
+BAREBOX_STM32MP_SOURCE		:= $(SRCDIR)/$(BAREBOX_STM32MP).$(BAREBOX_STM32MP_SUFFIX)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+BAREBOX_STM32MP_WRAPPER_BLACKLIST := \
+	TARGET_HARDEN_RELRO \
+	TARGET_HARDEN_BINDNOW \
+	TARGET_HARDEN_PIE \
+	TARGET_DEBUG \
+	TARGET_BUILD_ID
+
+BAREBOX_STM32MP_CONF_ENV := KCONFIG_NOTIMESTAMP=1
+BAREBOX_STM32MP_CONF_OPT := $(call barebox-opts, BAREBOX_STM32MP)
+
+BAREBOX_STM32MP_MAKE_ENV := $(BAREBOX_STM32MP_CONF_ENV)
+BAREBOX_STM32MP_MAKE_OPT := $(BAREBOX_STM32MP_CONF_OPT)
+
+BAREBOX_STM32MP_IMAGES := \
+	images/barebox-stm32mp157c-dk2.img
+
+BAREBOX_STM32MP_IMAGES := $(addprefix $(BAREBOX_STM32MP_DIR)/,$(BAREBOX_STM32MP_IMAGES))
+
+ifdef PTXCONF_BAREBOX_STM32MP
+$(BAREBOX_STM32MP_CONFIG):
+	@echo
+	@echo "****************************************************************************"
+	@echo " Please generate a bareboxconfig with 'ptxdist menuconfig barebox-stm32mp'"
+	@echo "****************************************************************************"
+	@echo
+	@echo
+	@exit 1
+endif
+
+$(STATEDIR)/barebox-stm32mp.prepare: $(BAREBOX_STM32MP_CONFIG)
+	@$(call targetinfo)
+	@rm -f "$(BAREBOX_STM32MP_DIR)/.ptxdist-defaultenv"
+	@ln -s "$(call ptx/in-platformconfigdir, barebox-stm32mp-defaultenv)" \
+		"$(BAREBOX_STM32MP_DIR)/.ptxdist-defaultenv"
+	@$(call world/prepare, BAREBOX_STM32MP)
+	@$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-stm32mp.install:
+	@$(call targetinfo)
+	@$(call touch)
+
+# ----------------------------------------------------------------------------
+# Targetinstall
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-stm32mp.targetinstall:
+	@$(call targetinfo)
+	@$(foreach image, $(BAREBOX_STM32MP_IMAGES), \
+		install -m 644 \
+			$(image) $(IMAGEDIR)/$(notdir $(image));)
+	@$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-stm32mp.clean:
+	@$(call targetinfo)
+	@$(call clean_pkg, BAREBOX_STM32MP)
+	@$(foreach image, $(BAREBOX_STM32MP_IMAGES), \
+		rm -fv $(IMAGEDIR)/$(notdir $(image))-stm32mp;)
+
+# ----------------------------------------------------------------------------
+# oldconfig / menuconfig
+# ----------------------------------------------------------------------------
+
+barebox-stm32mp_oldconfig barebox-stm32mp_menuconfig barebox-stm32mp_nconfig: $(STATEDIR)/barebox-stm32mp.extract
+	@$(call world/kconfig, BAREBOX_STM32MP, $(subst barebox-stm32mp_,,$@))
+
+# vim: syntax=make
-- 
2.25.0


_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de

  parent reply	other threads:[~2020-03-02 11:03 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-02 11:03 [DistroKit] [PATCH 0/6] v7a: add basic STM32MP157C-DK2 support Ahmad Fatoum
2020-03-02 11:03 ` [DistroKit] [PATCH 1/6] v7a: kernel: configure for STM32MP157 support Ahmad Fatoum
2020-03-05 16:43   ` Robert Schwebel
2020-03-02 11:03 ` Ahmad Fatoum [this message]
2020-03-03  9:43   ` [DistroKit] [PATCH 2/6] v7a: barebox: add new stm32mp rule Roland Hieber
2020-03-03  9:54     ` Ahmad Fatoum
2020-03-05 16:44   ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 3/6] rules: add ARM Trusted Firmware-A Ahmad Fatoum
2020-03-05 16:44   ` Robert Schwebel
2020-03-05 17:28     ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 4/6] v7a: stm32mp: enable TF-A for first stage Ahmad Fatoum
2020-03-05 16:45   ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 5/6] datapartition: disable autoformat of non-MBR Linux partitions Ahmad Fatoum
2020-03-05 16:45   ` Robert Schwebel
2020-03-02 11:03 ` [DistroKit] [PATCH 6/6] v7a: add stm32mp157c-dk2 SD-Card image Ahmad Fatoum
2020-03-03 12:08   ` Roland Hieber
2020-03-05 16:46     ` Robert Schwebel
2020-03-05 16:46   ` Robert Schwebel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200302110356.19112-3-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=distrokit@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox