* [DistroKit] [PATCH] platform-v7a: barebox bump v2019.01.0 → v2019.03.0
@ 2019-03-07 13:22 Rouven Czerwinski
2019-03-07 15:38 ` Robert Schwebel
0 siblings, 1 reply; 2+ messages in thread
From: Rouven Czerwinski @ 2019-03-07 13:22 UTC (permalink / raw)
To: distrokit; +Cc: Rouven Czerwinski, Uwe Kleine-König
Patch free, baby!
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
---
.../platform-v7a/barebox-am335x-mlo.config | 18 +-
configs/platform-v7a/barebox-am335x.config | 23 +-
configs/platform-v7a/barebox-mx6.config | 21 +-
configs/platform-v7a/barebox-rpi2.config | 15 +-
configs/platform-v7a/barebox-vexpress.config | 16 +-
...001-ARM-rpi-fix-typo-in-rpi-common.c.patch | 31 --
...-clks-into-board-specific-rpi-common.patch | 77 ----
...etrieve-miniuart-clock-from-firmware.patch | 34 --
..._ns16550-handle-default-reg-io-width.patch | 78 ----
...add-raspberry-pi-compatible-and-init.patch | 65 ----
.../0006-ARM-rpi-add-NS16550-support.patch | 24 --
...07-ARM-rpi-choose-miniuart-as-stdout.patch | 34 --
...-remove-miniuart-overlay-instruction.patch | 24 --
...9-ARM-rpi-use-defines-for-uart-bases.patch | 46 ---
...RM-imx-add-support-for-Udoo-Neo-full.patch | 332 ------------------
...0-customers-pengutronix-multi_v7-201.patch | 21 --
.../patches/barebox-2019.01.0/series | 23 --
.../rules/barebox-am335x-mlo.make | 4 +-
.../platform-v7a/rules/barebox-am335x.make | 4 +-
configs/platform-v7a/rules/barebox-mx6.make | 4 +-
configs/platform-v7a/rules/barebox-rpi2.make | 4 +-
.../platform-v7a/rules/barebox-vexpress.make | 4 +-
22 files changed, 62 insertions(+), 840 deletions(-)
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0001-ARM-rpi-fix-typo-in-rpi-common.c.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0002-ARM-rpi-move-clks-into-board-specific-rpi-common.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0003-ARM-rpi-retrieve-miniuart-clock-from-firmware.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0004-serial_ns16550-handle-default-reg-io-width.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0005-serial_ns16550-add-raspberry-pi-compatible-and-init.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0006-ARM-rpi-add-NS16550-support.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0007-ARM-rpi-choose-miniuart-as-stdout.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0008-doc-bcm283x-remove-miniuart-overlay-instruction.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0009-ARM-rpi-use-defines-for-uart-bases.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/0201-Release-2019.01.0-customers-pengutronix-multi_v7-201.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2019.01.0/series
diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index e333059..4dc0152 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.01.0-20190118-1 Configuration
+# Barebox/arm 2019.03.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_ARCH_QEMU is not set
#
@@ -52,7 +53,6 @@ CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
# OMAP Features
#
CONFIG_ARCH_AM33XX=y
-CONFIG_OMAP_CLOCK_SOURCE_DMTIMER=y
CONFIG_OMAP_GPMC=y
CONFIG_OMAP_BUILD_IFT=y
# CONFIG_OMAP_BUILD_SPI is not set
@@ -63,6 +63,7 @@ CONFIG_MACH_AFI_GF=y
CONFIG_MACH_BEAGLEBONE=y
CONFIG_MACH_PHYTEC_SOM_AM335X=y
# CONFIG_MACH_VSCOM_BALTOS is not set
+# CONFIG_MACH_WAGO_PFC_AM35XX is not set
# CONFIG_PHYTEC_SOM_AM335X_OF_AUTOENABLE is not set
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
@@ -76,7 +77,6 @@ CONFIG_ARM_EXCEPTIONS=y
# CONFIG_ARM_UNWIND is not set
# CONFIG_ARM_SEMIHOSTING is not set
# CONFIG_ARM_PSCI is not set
-CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_HAS_CACHE=y
@@ -273,6 +273,7 @@ CONFIG_MCI_OMAP_HSMMC=y
#
CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
# CONFIG_CLOCKSOURCE_DW_APB_TIMER is not set
+CONFIG_CLOCKSOURCE_TI_DM=y
#
# MFD
@@ -285,6 +286,7 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
+# CONFIG_DEV_MEM is not set
# CONFIG_LED is not set
#
@@ -310,9 +312,6 @@ CONFIG_GPIOLIB=y
#
# CONFIG_GPIO_74164 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_IMX is not set
-# CONFIG_GPIO_VF610 is not set
-# CONFIG_GPIO_MXS is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_W1 is not set
@@ -324,6 +323,7 @@ CONFIG_PINCTRL_SINGLE=y
# Bus devices
#
CONFIG_BUS_OMAP_GPMC=y
+CONFIG_TI_SYSC=y
# CONFIG_REGULATOR is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_RTC_CLASS is not set
@@ -339,6 +339,10 @@ CONFIG_BUS_OMAP_GPMC=y
# Memory controller drivers
#
+#
+# i.MX SoC drivers
+#
+
#
# Filesystem support
#
@@ -393,8 +397,6 @@ CONFIG_UNCOMPRESS=y
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_ZSTD_DECOMPRESS is not set
# CONFIG_XZ_DECOMPRESS is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_PROCESS_ESCAPE_SEQUENCE is not set
CONFIG_LZO_DECOMPRESS=y
CONFIG_XYMODEM=y
# CONFIG_RATP is not set
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index 21902fd..9bc9c42 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.01.0-20190118-1 Configuration
+# Barebox/arm 2019.03.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -34,6 +34,7 @@ CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_ARCH_QEMU is not set
#
@@ -53,7 +54,6 @@ CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
# OMAP Features
#
CONFIG_ARCH_AM33XX=y
-CONFIG_OMAP_CLOCK_SOURCE_DMTIMER=y
CONFIG_OMAP_GPMC=y
# CONFIG_OMAP_BUILD_IFT is not set
# CONFIG_OMAP_BUILD_SPI is not set
@@ -67,6 +67,7 @@ CONFIG_MACH_AFI_GF=y
CONFIG_MACH_BEAGLEBONE=y
# CONFIG_MACH_PHYTEC_SOM_AM335X is not set
# CONFIG_MACH_VSCOM_BALTOS is not set
+# CONFIG_MACH_WAGO_PFC_AM35XX is not set
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
@@ -81,7 +82,6 @@ CONFIG_ARM_EXCEPTIONS=y
CONFIG_ARM_UNWIND=y
# CONFIG_ARM_SEMIHOSTING is not set
# CONFIG_ARM_PSCI is not set
-CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_HAS_CACHE=y
@@ -212,7 +212,6 @@ CONFIG_DEBUG_OMAP_UART_PORT=1
CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
CONFIG_COMPILE_HASH=y
-CONFIG_COMPILE_MEMORY=y
#
# Commands
@@ -311,12 +310,12 @@ CONFIG_CMD_TRUE=y
# Network
#
CONFIG_CMD_DHCP=y
-# CONFIG_CMD_HOST is not set
+CONFIG_CMD_HOST=y
CONFIG_NET_CMD_IFUP=y
CONFIG_CMD_MIITOOL=y
CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
-# CONFIG_CMD_IP_ROUTE_GET is not set
+CONFIG_CMD_IP_ROUTE_GET=y
#
# Console and Framebuffer interaction
@@ -434,6 +433,7 @@ CONFIG_DRIVER_NET_CPSW=y
# CONFIG_AR8327N_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83867_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -554,6 +554,7 @@ CONFIG_MCI_OMAP_HSMMC=y
#
CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
# CONFIG_CLOCKSOURCE_DW_APB_TIMER is not set
+CONFIG_CLOCKSOURCE_TI_DM=y
#
# MFD
@@ -575,6 +576,7 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
+CONFIG_DEV_MEM=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LED_GPIO_OF=y
@@ -612,9 +614,6 @@ CONFIG_GPIOLIB=y
CONFIG_GPIO_GENERIC=y
# CONFIG_GPIO_74164 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
-# CONFIG_GPIO_IMX is not set
-# CONFIG_GPIO_VF610 is not set
-# CONFIG_GPIO_MXS is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_DESIGNWARE is not set
@@ -628,6 +627,7 @@ CONFIG_PINCTRL_SINGLE=y
# Bus devices
#
CONFIG_BUS_OMAP_GPMC=y
+CONFIG_TI_SYSC=y
# CONFIG_REGULATOR is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_RTC_CLASS is not set
@@ -643,6 +643,10 @@ CONFIG_BUS_OMAP_GPMC=y
# Memory controller drivers
#
+#
+# i.MX SoC drivers
+#
+
#
# Filesystem support
#
@@ -701,7 +705,6 @@ CONFIG_UNCOMPRESS=y
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_ZSTD_DECOMPRESS is not set
# CONFIG_XZ_DECOMPRESS is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_FNMATCH=y
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index e40e335..79818a1 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.01.0-20190118-1 Configuration
+# Barebox/arm 2019.03.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_IMX=y
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_ARCH_QEMU is not set
#
@@ -63,6 +64,7 @@ CONFIG_IMX_MULTI_BOARDS=y
# CONFIG_MACH_PCA100 is not set
# CONFIG_MACH_PCM038 is not set
# CONFIG_MACH_KINDLE_MX50 is not set
+# CONFIG_MACH_CCMX51 is not set
# CONFIG_MACH_EFIKA_MX_SMARTBOOK is not set
# CONFIG_MACH_EMBEDSKY_E9 is not set
# CONFIG_MACH_FREESCALE_MX51_PDK is not set
@@ -99,6 +101,7 @@ CONFIG_MACH_UDOO_NEO=y
# CONFIG_MACH_VF610_TWR is not set
# CONFIG_MACH_ZII_RDU1 is not set
# CONFIG_MACH_ZII_RDU2 is not set
+# CONFIG_MACH_ZII_IMX8MQ_DEV is not set
# CONFIG_MACH_ZII_VF610_DEV is not set
# CONFIG_MACH_ZII_IMX7D_RPU2 is not set
# CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
@@ -130,7 +133,6 @@ CONFIG_ARM_EXCEPTIONS=y
CONFIG_ARM_UNWIND=y
# CONFIG_ARM_SEMIHOSTING is not set
# CONFIG_ARM_PSCI is not set
-CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_GREGORIAN_CALENDER=y
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
@@ -264,7 +266,6 @@ CONFIG_DEBUG_IMX_UART_PORT=1
CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
CONFIG_COMPILE_HASH=y
-CONFIG_COMPILE_MEMORY=y
#
# Commands
@@ -366,12 +367,12 @@ CONFIG_CMD_TRUE=y
# Network
#
CONFIG_CMD_DHCP=y
-# CONFIG_CMD_HOST is not set
+CONFIG_CMD_HOST=y
CONFIG_NET_CMD_IFUP=y
CONFIG_CMD_MIITOOL=y
CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
-# CONFIG_CMD_IP_ROUTE_GET is not set
+CONFIG_CMD_IP_ROUTE_GET=y
#
# Console and Framebuffer interaction
@@ -494,6 +495,7 @@ CONFIG_DRIVER_NET_FEC_IMX=y
# CONFIG_AR8327N_PHY is not set
CONFIG_AT803X_PHY=y
# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83867_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MICREL_PHY=y
@@ -682,6 +684,7 @@ CONFIG_CLOCKSOURCE_IMX_GPT=y
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
+CONFIG_DEV_MEM=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
# CONFIG_LED_PWM is not set
@@ -726,9 +729,6 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_74164 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_IMX=y
-# CONFIG_GPIO_VF610 is not set
-# CONFIG_GPIO_MXS is not set
-# CONFIG_GPIO_OMAP is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_GPIO_SX150X is not set
@@ -767,6 +767,10 @@ CONFIG_USB_NOP_XCEIV=y
# Memory controller drivers
#
+#
+# i.MX SoC drivers
+#
+
#
# Filesystem support
#
@@ -828,7 +832,6 @@ CONFIG_ZLIB=y
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_ZSTD_DECOMPRESS is not set
# CONFIG_XZ_DECOMPRESS is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_BCH=y
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 13bf488..d2e2757 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.01.0-20190118-1 Configuration
+# Barebox/arm 2019.03.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_BCM283X=y
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_ARCH_QEMU is not set
#
@@ -70,7 +71,6 @@ CONFIG_ARM_UNWIND=y
CONFIG_ARM_SMCCC=y
CONFIG_ARM_SECURE_MONITOR=y
# CONFIG_ARM_PSCI is not set
-CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_GREGORIAN_CALENDER=y
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
@@ -200,7 +200,6 @@ CONFIG_DEFAULT_LOGLEVEL=7
CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
CONFIG_COMPILE_HASH=y
-CONFIG_COMPILE_MEMORY=y
#
# Commands
@@ -450,6 +449,7 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
+CONFIG_DEV_MEM=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
# CONFIG_LED_GPIO_OF is not set
@@ -484,10 +484,6 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_74164 is not set
CONFIG_GPIO_BCM283X=y
# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_IMX is not set
-# CONFIG_GPIO_VF610 is not set
-# CONFIG_GPIO_MXS is not set
-# CONFIG_GPIO_OMAP is not set
# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_W1 is not set
@@ -516,6 +512,10 @@ CONFIG_REGULATOR_BCM283X=y
# Memory controller drivers
#
+#
+# i.MX SoC drivers
+#
+
#
# Filesystem support
#
@@ -572,7 +572,6 @@ CONFIG_UNCOMPRESS=y
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_ZSTD_DECOMPRESS is not set
# CONFIG_XZ_DECOMPRESS is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
# CONFIG_LZO_DECOMPRESS is not set
CONFIG_FNMATCH=y
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index 71a9052..b81adff 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.01.0-20190118-1 Configuration
+# Barebox/arm 2019.03.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_VEXPRESS=y
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_ARCH_QEMU is not set
#
@@ -61,7 +62,6 @@ CONFIG_ARM_EXCEPTIONS=y
CONFIG_ARM_UNWIND=y
# CONFIG_ARM_SEMIHOSTING is not set
# CONFIG_ARM_PSCI is not set
-CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_GREGORIAN_CALENDER=y
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
@@ -182,7 +182,6 @@ CONFIG_DEFAULT_LOGLEVEL=6
CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
CONFIG_COMPILE_HASH=y
-CONFIG_COMPILE_MEMORY=y
#
# Commands
@@ -281,12 +280,12 @@ CONFIG_CMD_TRUE=y
# Network
#
CONFIG_CMD_DHCP=y
-# CONFIG_CMD_HOST is not set
+CONFIG_CMD_HOST=y
CONFIG_NET_CMD_IFUP=y
# CONFIG_CMD_MIITOOL is not set
CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
-# CONFIG_CMD_IP_ROUTE_GET is not set
+CONFIG_CMD_IP_ROUTE_GET=y
#
# Console and Framebuffer interaction
@@ -387,6 +386,7 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_AR8327N_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83867_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -484,6 +484,7 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
# Misc devices
#
CONFIG_SRAM=y
+CONFIG_DEV_MEM=y
# CONFIG_LED is not set
#
@@ -521,6 +522,10 @@ CONFIG_SRAM=y
# Memory controller drivers
#
+#
+# i.MX SoC drivers
+#
+
#
# Filesystem support
#
@@ -579,7 +584,6 @@ CONFIG_UNCOMPRESS=y
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_ZSTD_DECOMPRESS is not set
# CONFIG_XZ_DECOMPRESS is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
# CONFIG_LZO_DECOMPRESS is not set
CONFIG_FNMATCH=y
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0001-ARM-rpi-fix-typo-in-rpi-common.c.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0001-ARM-rpi-fix-typo-in-rpi-common.c.patch
deleted file mode 100644
index b45621a..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0001-ARM-rpi-fix-typo-in-rpi-common.c.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Wed, 12 Dec 2018 16:43:06 +0100
-Subject: [PATCH] ARM: rpi: fix typo in rpi-common.c
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- arch/arm/boards/raspberry-pi/rpi-common.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
-index 650b26ce7dcc..840f525bbbf6 100644
---- a/arch/arm/boards/raspberry-pi/rpi-common.c
-+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
-@@ -73,7 +73,7 @@ static int rpi_get_arm_mem(u32 *size)
- return 0;
- }
-
--static struct clk *rpi_register_firmare_clock(u32 clock_id, const char *name)
-+static struct clk *rpi_register_firmware_clock(u32 clock_id, const char *name)
- {
- BCM2835_MBOX_STACK_ALIGN(struct msg_get_clock_rate, msg);
- int ret;
-@@ -286,7 +286,7 @@ static int rpi_clock_init(void)
- {
- struct clk *clk;
-
-- clk = rpi_register_firmare_clock(BCM2835_MBOX_CLOCK_ID_EMMC,
-+ clk = rpi_register_firmware_clock(BCM2835_MBOX_CLOCK_ID_EMMC,
- "bcm2835_mci0");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0002-ARM-rpi-move-clks-into-board-specific-rpi-common.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0002-ARM-rpi-move-clks-into-board-specific-rpi-common.patch
deleted file mode 100644
index 8e72b19..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0002-ARM-rpi-move-clks-into-board-specific-rpi-common.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Wed, 12 Dec 2018 16:43:45 +0100
-Subject: [PATCH] ARM: rpi: move clks into board specific rpi-common
-
-We don't know if the firmware running on the raspberry pi is the same firmware
-which is running on all bcm283x devices.
-Therefore move the console clock initialization into the rpi-common.c board file.
-A future commit will use this function to retrieve the miniuart clock from the
-raspberry pi firmware.
-No functional changes.
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- arch/arm/boards/raspberry-pi/rpi-common.c | 19 +++++++++++++++++++
- arch/arm/mach-bcm283x/core.c | 19 -------------------
- 2 files changed, 19 insertions(+), 19 deletions(-)
-
-diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
-index 840f525bbbf6..887f096f7e4e 100644
---- a/arch/arm/boards/raspberry-pi/rpi-common.c
-+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
-@@ -298,6 +298,25 @@ static int rpi_clock_init(void)
- }
- postconsole_initcall(rpi_clock_init);
-
-+static int rpi_console_clock_init(void)
-+{
-+ struct clk *clk;
-+
-+ clk = clk_fixed("apb_pclk", 0);
-+ clk_register_clkdev(clk, "apb_pclk", NULL);
-+
-+ clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
-+ clk_register_clkdev(clk, NULL, "uart0-pl0110");
-+ clkdev_add_physbase(clk, 0x20201000, NULL);
-+ clkdev_add_physbase(clk, 0x3f201000, NULL);
-+
-+ clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
-+ clk_register_clkdev(clk, NULL, "bcm2835-cs");
-+
-+ return 0;
-+}
-+postcore_initcall(rpi_console_clock_init);
-+
- static int rpi_env_init(void)
- {
- struct stat s;
-diff --git a/arch/arm/mach-bcm283x/core.c b/arch/arm/mach-bcm283x/core.c
-index f1dcda86f7f0..f2528cf1f150 100644
---- a/arch/arm/mach-bcm283x/core.c
-+++ b/arch/arm/mach-bcm283x/core.c
-@@ -31,25 +31,6 @@
- #include <mach/core.h>
- #include <linux/amba/bus.h>
-
--static int bcm2835_clk_init(void)
--{
-- struct clk *clk;
--
-- clk = clk_fixed("apb_pclk", 0);
-- clk_register_clkdev(clk, "apb_pclk", NULL);
--
-- clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
-- clk_register_clkdev(clk, NULL, "uart0-pl0110");
-- clkdev_add_physbase(clk, 0x20201000, NULL);
-- clkdev_add_physbase(clk, 0x3f201000, NULL);
--
-- clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
-- clk_register_clkdev(clk, NULL, "bcm2835-cs");
--
-- return 0;
--}
--postcore_initcall(bcm2835_clk_init);
--
- void bcm2835_add_device_sdram(u32 size)
- {
- if (!size)
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0003-ARM-rpi-retrieve-miniuart-clock-from-firmware.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0003-ARM-rpi-retrieve-miniuart-clock-from-firmware.patch
deleted file mode 100644
index 8c7a5f5..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0003-ARM-rpi-retrieve-miniuart-clock-from-firmware.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Thu, 13 Dec 2018 07:23:37 +0100
-Subject: [PATCH] ARM: rpi: retrieve miniuart clock from firmware
-
-The miniuart uses the core clock as the clock source. This clock is fixed by the
-firmware to 250Mhz if enable_uart=1 is set in the config.txt file.
-However a user could still choose to overclock the core frequency,
-which would result in wrong baudrates computed by barebox.
-Retrieve the core clock frequency from the firmware to allow all potential
-firmware configurations to work with barebox.
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- arch/arm/boards/raspberry-pi/rpi-common.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
-index 887f096f7e4e..f22239c7ccb6 100644
---- a/arch/arm/boards/raspberry-pi/rpi-common.c
-+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
-@@ -310,6 +310,13 @@ static int rpi_console_clock_init(void)
- clkdev_add_physbase(clk, 0x20201000, NULL);
- clkdev_add_physbase(clk, 0x3f201000, NULL);
-
-+ clk = rpi_register_firmware_clock(BCM2835_MBOX_CLOCK_ID_CORE,
-+ "uart1-8250");
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+
-+ clkdev_add_physbase(clk, 0x3f215040, NULL);
-+
- clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
- clk_register_clkdev(clk, NULL, "bcm2835-cs");
-
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0004-serial_ns16550-handle-default-reg-io-width.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0004-serial_ns16550-handle-default-reg-io-width.patch
deleted file mode 100644
index 568d74d..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0004-serial_ns16550-handle-default-reg-io-width.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Tue, 11 Dec 2018 11:28:33 +0100
-Subject: [PATCH] serial_ns16550: handle default reg-io-width
-
-According to the device tree bindings for 8250, width is an optional property.
-Default to 1 which is the same default value as used by the kernel.
-Before this change the driver would not work for device trees which do not
-include the optional binding.
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- drivers/serial/serial_ns16550.c | 46 ++++++++++++++++++++---------------------
- 1 file changed, 23 insertions(+), 23 deletions(-)
-
-diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
-index 4d73ea8b8740..8ddcfdbefc1d 100644
---- a/drivers/serial/serial_ns16550.c
-+++ b/drivers/serial/serial_ns16550.c
-@@ -297,36 +297,36 @@ static int ns16550_tstc(struct console_device *cdev)
- static void ns16550_probe_dt(struct device_d *dev, struct ns16550_priv *priv)
- {
- struct device_node *np = dev->device_node;
-- u32 width;
-+ u32 width = 1;
-
- if (!IS_ENABLED(CONFIG_OFDEVICE))
- return;
-
- of_property_read_u32(np, "clock-frequency", &priv->plat.clock);
- of_property_read_u32(np, "reg-shift", &priv->plat.shift);
-- if (!of_property_read_u32(np, "reg-io-width", &width))
-- switch (width) {
-- case 1:
-- priv->read_reg = ns16550_read_reg_mmio_8;
-- priv->write_reg = ns16550_write_reg_mmio_8;
-- break;
-- case 2:
-- priv->read_reg = ns16550_read_reg_mmio_16;
-- priv->write_reg = ns16550_write_reg_mmio_16;
-- break;
-- case 4:
-- if (of_device_is_big_endian(np)) {
-- priv->read_reg = ns16550_read_reg_mmio_32be;
-- priv->write_reg = ns16550_write_reg_mmio_32be;
-- } else {
-- priv->read_reg = ns16550_read_reg_mmio_32;
-- priv->write_reg = ns16550_write_reg_mmio_32;
-- }
-- break;
-- default:
-- dev_err(dev, "unsupported reg-io-width (%d)\n",
-- width);
-+ of_property_read_u32(np, "reg-io-width", &width);
-+ switch (width) {
-+ case 1:
-+ priv->read_reg = ns16550_read_reg_mmio_8;
-+ priv->write_reg = ns16550_write_reg_mmio_8;
-+ break;
-+ case 2:
-+ priv->read_reg = ns16550_read_reg_mmio_16;
-+ priv->write_reg = ns16550_write_reg_mmio_16;
-+ break;
-+ case 4:
-+ if (of_device_is_big_endian(np)) {
-+ priv->read_reg = ns16550_read_reg_mmio_32be;
-+ priv->write_reg = ns16550_write_reg_mmio_32be;
-+ } else {
-+ priv->read_reg = ns16550_read_reg_mmio_32;
-+ priv->write_reg = ns16550_write_reg_mmio_32;
- }
-+ break;
-+ default:
-+ dev_err(dev, "unsupported reg-io-width (%d)\n",
-+ width);
-+ }
- }
-
- static struct ns16550_drvdata ns16450_drvdata = {
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0005-serial_ns16550-add-raspberry-pi-compatible-and-init.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0005-serial_ns16550-add-raspberry-pi-compatible-and-init.patch
deleted file mode 100644
index 37a4df8..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0005-serial_ns16550-add-raspberry-pi-compatible-and-init.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Tue, 11 Dec 2018 10:50:44 +0100
-Subject: [PATCH] serial_ns16550: add raspberry pi compatible and init
-
-Add the compatible for the Raspberry Pi AUX UART and an init function which
-enables it via the aux register and configures the correct shift value.
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- drivers/serial/serial_ns16550.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
-diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
-index 8ddcfdbefc1d..ccd082e495c3 100644
---- a/drivers/serial/serial_ns16550.c
-+++ b/drivers/serial/serial_ns16550.c
-@@ -253,6 +253,23 @@ static void ns16550_jz_init_port(struct console_device *cdev)
- ns16550_serial_init_port(cdev);
- }
-
-+#define BCM2836_AUX_CLOCK_ENB 0x3f215004 /* BCM2835 AUX Clock enable register */
-+#define BCM2836_AUX_CLOCK_EN_UART BIT(0) /* Bit 0 enables the Miniuart */
-+
-+static void rpi_init_port(struct console_device *cdev)
-+{
-+ struct ns16550_priv *priv = to_ns16550_priv(cdev);
-+
-+ writeb(BCM2836_AUX_CLOCK_EN_UART, BCM2836_AUX_CLOCK_ENB);
-+ priv->plat.shift = 2;
-+ /*
-+ * We double the clock rate since the 16550 will divide by 16
-+ * (instead of 8 required by the BCM2835 peripheral manual)
-+ */
-+ priv->plat.clock = priv->plat.clock*2;
-+ ns16550_serial_init_port(cdev);
-+}
-+
- /*********** Exposed Functions **********************************/
-
- /**
-@@ -353,6 +370,11 @@ static __maybe_unused struct ns16550_drvdata tegra_drvdata = {
- .linux_console_name = "ttyS",
- };
-
-+static __maybe_unused struct ns16550_drvdata rpi_drvdata = {
-+ .init_port = rpi_init_port,
-+ .linux_console_name = "ttyS",
-+};
-+
- static int ns16550_init_iomem(struct device_d *dev, struct ns16550_priv *priv)
- {
- struct resource *iores;
-@@ -527,6 +549,12 @@ static struct of_device_id ns16550_serial_dt_ids[] = {
- .compatible = "ingenic,jz4740-uart",
- .data = &jz_drvdata,
- },
-+#endif
-+#if IS_ENABLED(CONFIG_MACH_RPI_COMMON)
-+ {
-+ .compatible = "brcm,bcm2835-aux-uart",
-+ .data = &rpi_drvdata,
-+ },
- #endif
- {
- /* sentinel */
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0006-ARM-rpi-add-NS16550-support.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0006-ARM-rpi-add-NS16550-support.patch
deleted file mode 100644
index fed00ac..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0006-ARM-rpi-add-NS16550-support.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Wed, 19 Dec 2018 12:09:23 +0100
-Subject: [PATCH] ARM: rpi: add NS16550 support
-
-Since the 16550 driver now supports the RPI3 miniuart, enable it in the default
- config.
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- arch/arm/configs/rpi_defconfig | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
-index 2bb615849324..dc5ab1fe17f6 100644
---- a/arch/arm/configs/rpi_defconfig
-+++ b/arch/arm/configs/rpi_defconfig
-@@ -63,6 +63,7 @@ CONFIG_CMD_OF_PROPERTY=y
- CONFIG_CMD_OFTREE=y
- CONFIG_CMD_TIME=y
- CONFIG_SERIAL_AMBA_PL011=y
-+CONFIG_DRIVER_SERIAL_NS16550=y
- CONFIG_MCI=y
- CONFIG_MCI_BCM283X=y
- CONFIG_LED=y
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0007-ARM-rpi-choose-miniuart-as-stdout.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0007-ARM-rpi-choose-miniuart-as-stdout.patch
deleted file mode 100644
index 126fe01..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0007-ARM-rpi-choose-miniuart-as-stdout.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Tue, 11 Dec 2018 10:48:02 +0100
-Subject: [PATCH] ARM: rpi: choose miniuart as stdout
-
-Since we now support the miniuart, enable it as the default stdout port.
-With this change the device tree overlay to switch the miniuart to bluetooth is
-no longer necessary.
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- arch/arm/dts/bcm2837-rpi-3.dts | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
-diff --git a/arch/arm/dts/bcm2837-rpi-3.dts b/arch/arm/dts/bcm2837-rpi-3.dts
-index d6ffc369122c..194b41c23b77 100644
---- a/arch/arm/dts/bcm2837-rpi-3.dts
-+++ b/arch/arm/dts/bcm2837-rpi-3.dts
-@@ -2,15 +2,10 @@
-
- / {
- chosen {
-- stdout-path = &uart0;
-+ stdout-path = &uart1;
- };
-
- memory {
- reg = <0x0 0x0>;
- };
- };
--
--&uart0 {
-- status = "okay";
-- /delete-node/ bluetooth;
--};
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0008-doc-bcm283x-remove-miniuart-overlay-instruction.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0008-doc-bcm283x-remove-miniuart-overlay-instruction.patch
deleted file mode 100644
index 9d43761..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0008-doc-bcm283x-remove-miniuart-overlay-instruction.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Wed, 12 Dec 2018 15:06:49 +0100
-Subject: [PATCH] doc: bcm283x: remove miniuart overlay instruction
-
-Since we now use the miniuart on the raspberry pi 3, the miniuart overlay is no
-longer needed.
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- Documentation/boards/bcm2835.rst | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/Documentation/boards/bcm2835.rst b/Documentation/boards/bcm2835.rst
-index 79ea0ff7a78b..ea80d5834861 100644
---- a/Documentation/boards/bcm2835.rst
-+++ b/Documentation/boards/bcm2835.rst
-@@ -22,7 +22,6 @@ Raspberry Pi
-
- kernel=barebox.img
- enable_uart=1
-- dtoverlay=pi3-miniuart-bt
-
- (For more information, refer to the `documentation for config.txt`_.)
-
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0009-ARM-rpi-use-defines-for-uart-bases.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0009-ARM-rpi-use-defines-for-uart-bases.patch
deleted file mode 100644
index e2b3607..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0009-ARM-rpi-use-defines-for-uart-bases.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Tue, 18 Dec 2018 11:41:38 +0100
-Subject: [PATCH] ARM: rpi: use defines for uart bases
-
-Previously the clkdev_add_phybase was called on magic register values,
-add defines which clarify the device for which the phybase clkdev is created.
-
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- arch/arm/boards/raspberry-pi/rpi-common.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
-index f22239c7ccb6..219c9c7d2b9e 100644
---- a/arch/arm/boards/raspberry-pi/rpi-common.c
-+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
-@@ -298,6 +298,10 @@ static int rpi_clock_init(void)
- }
- postconsole_initcall(rpi_clock_init);
-
-+#define BCM2835_PL011_BASE 0x20201000
-+#define BCM2836_PL011_BASE 0x3f201000
-+#define BCM2836_MINIUART_BASE 0x3f215040
-+
- static int rpi_console_clock_init(void)
- {
- struct clk *clk;
-@@ -307,15 +311,15 @@ static int rpi_console_clock_init(void)
-
- clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
- clk_register_clkdev(clk, NULL, "uart0-pl0110");
-- clkdev_add_physbase(clk, 0x20201000, NULL);
-- clkdev_add_physbase(clk, 0x3f201000, NULL);
-+ clkdev_add_physbase(clk, BCM2835_PL011_BASE, NULL);
-+ clkdev_add_physbase(clk, BCM2836_PL011_BASE, NULL);
-
- clk = rpi_register_firmware_clock(BCM2835_MBOX_CLOCK_ID_CORE,
- "uart1-8250");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
-- clkdev_add_physbase(clk, 0x3f215040, NULL);
-+ clkdev_add_physbase(clk, BCM2836_MINIUART_BASE, NULL);
-
- clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
- clk_register_clkdev(clk, NULL, "bcm2835-cs");
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
deleted file mode 100644
index 293e09e..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
+++ /dev/null
@@ -1,332 +0,0 @@
-From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
-Date: Wed, 14 Jun 2017 18:32:15 +0200
-Subject: [PATCH] ARM: imx: add support for Udoo Neo full
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Original patch from Uwe Kleine-König, I fixed the
-review comments and the imxcfg file to use the udoo neo values.
-
-I also tested the support on the udoo neo full board.
-
-Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
----
- arch/arm/boards/Makefile | 1 +
- arch/arm/boards/udoo-neo/Makefile | 2 +
- arch/arm/boards/udoo-neo/board.c | 27 +++++
- .../flash-header-mx6sx-udoo-neo_full.imxcfg | 131 +++++++++++++++++++++
- arch/arm/boards/udoo-neo/lowlevel.c | 39 ++++++
- arch/arm/dts/Makefile | 1 +
- arch/arm/dts/imx6sx-udoo-neo-full.dts | 4 +
- arch/arm/mach-imx/Kconfig | 4 +
- arch/arm/mach-imx/include/mach/esdctl.h | 1 +
- images/Makefile.imx | 5 +
- 10 files changed, 215 insertions(+)
- create mode 100644 arch/arm/boards/udoo-neo/Makefile
- create mode 100644 arch/arm/boards/udoo-neo/board.c
- create mode 100644 arch/arm/boards/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg
- create mode 100644 arch/arm/boards/udoo-neo/lowlevel.c
- create mode 100644 arch/arm/dts/imx6sx-udoo-neo-full.dts
-
-diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
-index 3bf176b14dc2..953a6eec12e4 100644
---- a/arch/arm/boards/Makefile
-+++ b/arch/arm/boards/Makefile
-@@ -139,6 +139,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
- obj-$(CONFIG_MACH_TX53) += karo-tx53/
- obj-$(CONFIG_MACH_TX6X) += karo-tx6x/
- obj-$(CONFIG_MACH_UDOO) += udoo/
-+obj-$(CONFIG_MACH_UDOO_NEO) += udoo-neo/
- obj-$(CONFIG_MACH_USB_A9260) += usb-a926x/
- obj-$(CONFIG_MACH_USB_A9263) += usb-a926x/
- obj-$(CONFIG_MACH_USB_A9G20) += usb-a926x/
-diff --git a/arch/arm/boards/udoo-neo/Makefile b/arch/arm/boards/udoo-neo/Makefile
-new file mode 100644
-index 000000000000..01c7a259e9a5
---- /dev/null
-+++ b/arch/arm/boards/udoo-neo/Makefile
-@@ -0,0 +1,2 @@
-+obj-y += board.o
-+lwl-y += lowlevel.o
-diff --git a/arch/arm/boards/udoo-neo/board.c b/arch/arm/boards/udoo-neo/board.c
-new file mode 100644
-index 000000000000..9bf480305d70
---- /dev/null
-+++ b/arch/arm/boards/udoo-neo/board.c
-@@ -0,0 +1,27 @@
-+/*
-+ * Copyright (C) 2014 Pengutronix, Sascha Hauer
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2, as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <common.h>
-+#include <init.h>
-+#include <linux/clk.h>
-+
-+static int imx6sx_udoneo_coredevices_init(void)
-+{
-+ if (!of_machine_is_compatible("fsl,imx6sx-udoo-neo"))
-+ return 0;
-+
-+ barebox_set_hostname("mx6sx-udooneo");
-+
-+ return 0;
-+}
-+coredevice_initcall(imx6sx_udoneo_coredevices_init);
-diff --git a/arch/arm/boards/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg b/arch/arm/boards/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg
-new file mode 100644
-index 000000000000..39f2a8a221f7
---- /dev/null
-+++ b/arch/arm/boards/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg
-@@ -0,0 +1,131 @@
-+/*
-+ * These values are taken from:
-+ * repository: https://github.com/UDOOboard/uboot-imx
-+ * branch: udoo/2015.04.imx
-+ * file: board/udoo/udoo_neo/udoo_neo.cfg
-+ */
-+
-+loadaddr 0x80000000
-+soc imx6
-+dcdofs 0x400
-+
-+/* Enable all clocks */
-+wm 32 0x020c4068 0xffffffff
-+wm 32 0x020c406c 0xffffffff
-+wm 32 0x020c4070 0xffffffff
-+wm 32 0x020c4074 0xffffffff
-+wm 32 0x020c4078 0xffffffff
-+wm 32 0x020c407c 0xffffffff
-+wm 32 0x020c4080 0xffffffff
-+wm 32 0x020c4084 0xffffffff
-+/********************************************/
-+
-+/* IOMUX */
-+/* DDR IO TYPE */
-+wm 32 0x020e0618 0x000c0000
-+wm 32 0x020e05fc 0x00000000
-+/********************************************/
-+
-+/* CLOCK */
-+wm 32 0x020e032c 0x00000030
-+/********************************************/
-+
-+/* ADDRESS */
-+wm 32 0x020e0300 0x00000020
-+wm 32 0x020e02fc 0x00000020
-+wm 32 0x020e05f4 0x00000020
-+/********************************************/
-+
-+/* CONTROL */
-+wm 32 0x020e0340 0x00000020
-+
-+wm 32 0x020e0320 0x00000000
-+wm 32 0x020e0310 0x00000020
-+wm 32 0x020e0314 0x00000020
-+wm 32 0x020e0614 0x00000020
-+/********************************************/
-+
-+/* DATA STROBE */
-+wm 32 0x020e05f8 0x00020000
-+wm 32 0x020e0330 0x00000028
-+wm 32 0x020e0334 0x00000028
-+wm 32 0x020e0338 0x00000028
-+wm 32 0x020e033c 0x00000028
-+/********************************************/
-+
-+/* DATA */
-+wm 32 0x020e0608 0x00020000
-+wm 32 0x020e060c 0x00000028
-+wm 32 0x020e0610 0x00000028
-+wm 32 0x020e061c 0x00000028
-+wm 32 0x020e0620 0x00000028
-+wm 32 0x020e02ec 0x00000028
-+wm 32 0x020e02f0 0x00000028
-+wm 32 0x020e02f4 0x00000028
-+wm 32 0x020e02f8 0x00000028
-+/********************************************/
-+
-+/* Calibrations */
-+/* ZQ */
-+wm 32 0x021b0800 0xa1390003
-+/********************************************/
-+
-+/* write leveling */
-+wm 32 0x021b080c 0x000E000B
-+wm 32 0x021b0810 0x000E0010
-+/********************************************/
-+
-+/* DQS Read Gate */
-+wm 32 0x021b083c 0x41600158
-+wm 32 0x021b0840 0x01500140
-+/********************************************/
-+
-+/* Read/Write Delay */
-+wm 32 0x021b0848 0x3A383E3E
-+wm 32 0x021b0850 0x3A383C38
-+/********************************************/
-+
-+/* read data bit delay */
-+wm 32 0x021b081c 0x33333333
-+wm 32 0x021b0820 0x33333333
-+wm 32 0x021b0824 0x33333333
-+wm 32 0x021b0828 0x33333333
-+/********************************************/
-+
-+/* Complete calibration by forced measurment */
-+wm 32 0x021b08b8 0x00000800
-+/********************************************/
-+
-+/* MMDC init */
-+/* in DDR3, 64-bit mode, only MMDC0 is initiated */
-+wm 32 0x021b0004 0x0002002d
-+wm 32 0x021b0008 0x00333030
-+wm 32 0x021b000c 0x676b52f3
-+wm 32 0x021b0010 0xb66d8b63
-+wm 32 0x021b0014 0x01ff00db
-+wm 32 0x021b0018 0x00011740
-+wm 32 0x021b001c 0x00008000
-+wm 32 0x021b002c 0x000026d2
-+wm 32 0x021b0030 0x006b1023
-+wm 32 0x021b0040 0x0000005f
-+wm 32 0x021b0000 0x83190000
-+/********************************************/
-+
-+/* Initialize MT41K256M16HA-125 */
-+/* MR2 */
-+wm 32 0x021b001c 0x04008032
-+/* MR3 */
-+wm 32 0x021b001c 0x00008033
-+/* MR1 */
-+wm 32 0x021b001c 0x00048031
-+/* MR0 */
-+wm 32 0x021b001c 0x05208030
-+/* DDR device ZQ calibration */
-+wm 32 0x021b001c 0x04008040
-+/********************************************/
-+
-+/* final DDR setup, before operation start */
-+wm 32 0x021b0020 0x00000800
-+wm 32 0x021b0818 0x00011117
-+wm 32 0x021b001c 0x00000000
-+/********************************************/
-diff --git a/arch/arm/boards/udoo-neo/lowlevel.c b/arch/arm/boards/udoo-neo/lowlevel.c
-new file mode 100644
-index 000000000000..bb6b7d833278
---- /dev/null
-+++ b/arch/arm/boards/udoo-neo/lowlevel.c
-@@ -0,0 +1,39 @@
-+#include <debug_ll.h>
-+#include <common.h>
-+#include <linux/sizes.h>
-+#include <mach/generic.h>
-+#include <asm/barebox-arm-head.h>
-+#include <asm/barebox-arm.h>
-+#include <mach/esdctl.h>
-+
-+static inline void setup_uart(void)
-+{
-+ void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
-+
-+ imx6_ungate_all_peripherals();
-+
-+ writel(0x0, iomuxbase + 0x24);
-+ writel(0x1b0b1, iomuxbase + 0x036C);
-+ writel(0x0, iomuxbase + 0x28);
-+ writel(0x1b0b1, iomuxbase + 0x0370);
-+
-+ imx6_uart_setup_ll();
-+
-+ putc_ll('>');
-+}
-+
-+extern char __dtb_imx6sx_udoo_neo_full_start[];
-+
-+ENTRY_FUNCTION(start_imx6sx_udoo_neo, r0, r1, r2)
-+{
-+ void *fdt;
-+
-+ imx6_cpu_lowlevel_init();
-+
-+ if (IS_ENABLED(CONFIG_DEBUG_LL))
-+ setup_uart();
-+
-+ fdt = __dtb_imx6sx_udoo_neo_full_start + get_runtime_offset();
-+
-+ imx6sx_barebox_entry(fdt);
-+}
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index c08b35a10132..1c6bfd900b99 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -99,6 +99,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
- pbl-dtb-$(CONFIG_MACH_TX6X) += imx6q-tx6q.dtb.o
- pbl-dtb-$(CONFIG_MACH_TURRIS_OMNIA) += armada-385-turris-omnia-bb.dtb.o
- pbl-dtb-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
-+pbl-dtb-$(CONFIG_MACH_UDOO_NEO) += imx6sx-udoo-neo-full.dtb.o
- pbl-dtb-$(CONFIG_MACH_USI_TOPKICK) += kirkwood-topkick-bb.dtb.o
- pbl-dtb-$(CONFIG_MACH_VARISCITE_MX6) += imx6q-var-custom.dtb.o
- pbl-dtb-$(CONFIG_MACH_VEXPRESS) += vexpress-v2p-ca9.dtb.o
-diff --git a/arch/arm/dts/imx6sx-udoo-neo-full.dts b/arch/arm/dts/imx6sx-udoo-neo-full.dts
-new file mode 100644
-index 000000000000..9203d40207c5
---- /dev/null
-+++ b/arch/arm/dts/imx6sx-udoo-neo-full.dts
-@@ -0,0 +1,4 @@
-+#include <arm/imx6sx-udoo-neo-full.dts>
-+
-+/{
-+};
-diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
-index d9b60053db03..53226c55944f 100644
---- a/arch/arm/mach-imx/Kconfig
-+++ b/arch/arm/mach-imx/Kconfig
-@@ -384,6 +384,10 @@ config MACH_UDOO
- bool "Freescale i.MX6 UDOO Board"
- select ARCH_IMX6
-
-+config MACH_UDOO_NEO
-+ bool "i.MX6 UDOO Neo Board (full variant)"
-+ select ARCH_IMX6SX
-+
- config MACH_VARISCITE_MX6
- bool "Variscite i.MX6 Quad SOM"
- select ARCH_IMX6
-diff --git a/arch/arm/mach-imx/include/mach/esdctl.h b/arch/arm/mach-imx/include/mach/esdctl.h
-index bc6c7339535e..18c4a2836007 100644
---- a/arch/arm/mach-imx/include/mach/esdctl.h
-+++ b/arch/arm/mach-imx/include/mach/esdctl.h
-@@ -141,6 +141,7 @@ void __noreturn imx6ul_barebox_entry(void *boarddata);
- void __noreturn vf610_barebox_entry(void *boarddata);
- void __noreturn imx8mq_barebox_entry(void *boarddata);
- void __noreturn imx7d_barebox_entry(void *boarddata);
-+#define imx6sx_barebox_entry(boarddata) imx6ul_barebox_entry(boarddata)
- void imx_esdctl_disable(void);
- #endif
-
-diff --git a/images/Makefile.imx b/images/Makefile.imx
-index 8b8a5452b770..4f6fd0489688 100644
---- a/images/Makefile.imx
-+++ b/images/Makefile.imx
-@@ -254,6 +254,11 @@ CFG_start_imx6q_sabresd.pblb.imximg = $(board)/freescale-mx6-sabresd/flash-heade
- FILE_barebox-freescale-imx6q-sabresd.img = start_imx6q_sabresd.pblb.imximg
- image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd.img
-
-+pblb-$(CONFIG_MACH_UDOO_NEO) += start_imx6sx_udoo_neo
-+CFG_start_imx6sx_udoo_neo.pblb.imximg = $(board)/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg
-+FILE_barebox-udoo-neo.img = start_imx6sx_udoo_neo.pblb.imximg
-+image-$(CONFIG_MACH_UDOO_NEO) += barebox-udoo-neo.img
-+
- pblb-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += start_imx6sx_sabresdb
- CFG_start_imx6sx_sabresdb.pblb.imximg = $(board)/freescale-mx6sx-sabresdb/flash-header-mx6sx-sabresdb.imxcfg
- FILE_barebox-freescale-imx6sx-sabresdb.img = start_imx6sx_sabresdb.pblb.imximg
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/0201-Release-2019.01.0-customers-pengutronix-multi_v7-201.patch b/configs/platform-v7a/patches/barebox-2019.01.0/0201-Release-2019.01.0-customers-pengutronix-multi_v7-201.patch
deleted file mode 100644
index db1f38e..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/0201-Release-2019.01.0-customers-pengutronix-multi_v7-201.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
-Date: Fri, 18 Jan 2019 11:36:33 +0100
-Subject: [PATCH] Release 2019.01.0/customers/pengutronix/multi_v7/20190118-1
-
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index d6423b84fef0..6617637ca045 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,7 @@
- VERSION = 2019
- PATCHLEVEL = 01
- SUBLEVEL = 0
--EXTRAVERSION =
-+EXTRAVERSION =-20190118-1
- NAME = None
-
- # *DOCUMENTATION*
diff --git a/configs/platform-v7a/patches/barebox-2019.01.0/series b/configs/platform-v7a/patches/barebox-2019.01.0/series
deleted file mode 100644
index 638a7d9..0000000
--- a/configs/platform-v7a/patches/barebox-2019.01.0/series
+++ /dev/null
@@ -1,23 +0,0 @@
-# umpf-base: v2019.01.0
-# umpf-name: 2019.01.0/customers/pengutronix/multi_v7
-# umpf-version: 2019.01.0/customers/pengutronix/multi_v7/20190118-1
-# umpf-topic: v2018.12.0/topic/rpi3_miniuart
-# umpf-hashinfo: 9320eb666c0057ffb3b7475108a16c76623a527d
-# umpf-topic-range: 60e12093cf3288086b62612bb3cf565a0b4320aa..d913f77a69b2fe9021c6b41266373e357aa1b598
-0001-ARM-rpi-fix-typo-in-rpi-common.c.patch
-0002-ARM-rpi-move-clks-into-board-specific-rpi-common.patch
-0003-ARM-rpi-retrieve-miniuart-clock-from-firmware.patch
-0004-serial_ns16550-handle-default-reg-io-width.patch
-0005-serial_ns16550-add-raspberry-pi-compatible-and-init.patch
-0006-ARM-rpi-add-NS16550-support.patch
-0007-ARM-rpi-choose-miniuart-as-stdout.patch
-0008-doc-bcm283x-remove-miniuart-overlay-instruction.patch
-0009-ARM-rpi-use-defines-for-uart-bases.patch
-# umpf-topic: v2019.01.0/customers/pengutronix/udoo-neo
-# umpf-hashinfo: 999a56255a0ddad3f9c5344b940987f63eec39b4
-# umpf-topic-range: d913f77a69b2fe9021c6b41266373e357aa1b598..69e5b7ada0621fe116216820ac4d1f04c3dad2c2
-0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
-# umpf-release: 2019.01.0/customers/pengutronix/multi_v7/20190118-1
-# umpf-topic-range: 69e5b7ada0621fe116216820ac4d1f04c3dad2c2..8bb76e29ee661a3dfb57117bb8fe8cfe5e3cc617
-0201-Release-2019.01.0-customers-pengutronix-multi_v7-201.patch
-# umpf-end
diff --git a/configs/platform-v7a/rules/barebox-am335x-mlo.make b/configs/platform-v7a/rules/barebox-am335x-mlo.make
index 272d3df..6d88de8 100644
--- a/configs/platform-v7a/rules/barebox-am335x-mlo.make
+++ b/configs/platform-v7a/rules/barebox-am335x-mlo.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X_MLO) += barebox-am335x-mlo
#
# Paths and names
#
-BAREBOX_AM335X_MLO_VERSION := 2019.01.0
-BAREBOX_AM335X_MLO_MD5 := 51fae9592ee453535b9b21ffdd50f775
+BAREBOX_AM335X_MLO_VERSION := 2019.03.0
+BAREBOX_AM335X_MLO_MD5 := 0b6fd3f04cb3e26276ae3cc20eed1bd7
BAREBOX_AM335X_MLO := barebox-$(BAREBOX_AM335X_MLO_VERSION)
BAREBOX_AM335X_MLO_SUFFIX := tar.bz2
BAREBOX_AM335X_MLO_DIR := $(BUILDDIR)/barebox-am335x-mlo-$(BAREBOX_AM335X_MLO_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-am335x.make b/configs/platform-v7a/rules/barebox-am335x.make
index 5114831..223deb4 100644
--- a/configs/platform-v7a/rules/barebox-am335x.make
+++ b/configs/platform-v7a/rules/barebox-am335x.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X) += barebox-am335x
#
# Paths and names
#
-BAREBOX_AM335X_VERSION := 2019.01.0
-BAREBOX_AM335X_MD5 := 51fae9592ee453535b9b21ffdd50f775
+BAREBOX_AM335X_VERSION := 2019.03.0
+BAREBOX_AM335X_MD5 := 0b6fd3f04cb3e26276ae3cc20eed1bd7
BAREBOX_AM335X := barebox-$(BAREBOX_AM335X_VERSION)
BAREBOX_AM335X_SUFFIX := tar.bz2
BAREBOX_AM335X_DIR := $(BUILDDIR)/barebox-am335x-$(BAREBOX_AM335X_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-mx6.make b/configs/platform-v7a/rules/barebox-mx6.make
index 44631b2..f151e2f 100644
--- a/configs/platform-v7a/rules/barebox-mx6.make
+++ b/configs/platform-v7a/rules/barebox-mx6.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_MX6) += barebox-mx6
#
# Paths and names
#
-BAREBOX_MX6_VERSION := 2019.01.0
-BAREBOX_MX6_MD5 := 51fae9592ee453535b9b21ffdd50f775
+BAREBOX_MX6_VERSION := 2019.03.0
+BAREBOX_MX6_MD5 := 0b6fd3f04cb3e26276ae3cc20eed1bd7
BAREBOX_MX6 := barebox-$(BAREBOX_MX6_VERSION)
BAREBOX_MX6_SUFFIX := tar.bz2
BAREBOX_MX6_DIR := $(BUILDDIR)/barebox-mx6-$(BAREBOX_MX6_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-rpi2.make b/configs/platform-v7a/rules/barebox-rpi2.make
index c4f1816..e23556c 100644
--- a/configs/platform-v7a/rules/barebox-rpi2.make
+++ b/configs/platform-v7a/rules/barebox-rpi2.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_RPI2) += barebox-rpi2
#
# Paths and names
#
-BAREBOX_RPI2_VERSION := 2019.01.0
-BAREBOX_RPI2_MD5 := 51fae9592ee453535b9b21ffdd50f775
+BAREBOX_RPI2_VERSION := 2019.03.0
+BAREBOX_RPI2_MD5 := 0b6fd3f04cb3e26276ae3cc20eed1bd7
BAREBOX_RPI2 := barebox-$(BAREBOX_RPI2_VERSION)
BAREBOX_RPI2_SUFFIX := tar.bz2
BAREBOX_RPI2_DIR := $(BUILDDIR)/barebox-rpi2-$(BAREBOX_RPI2_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-vexpress.make b/configs/platform-v7a/rules/barebox-vexpress.make
index 6cd3246..dc3e430 100644
--- a/configs/platform-v7a/rules/barebox-vexpress.make
+++ b/configs/platform-v7a/rules/barebox-vexpress.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_VEXPRESS) += barebox-vexpress
#
# Paths and names
#
-BAREBOX_VEXPRESS_VERSION := 2019.01.0
-BAREBOX_VEXPRESS_MD5 := 51fae9592ee453535b9b21ffdd50f775
+BAREBOX_VEXPRESS_VERSION := 2019.03.0
+BAREBOX_VEXPRESS_MD5 := 0b6fd3f04cb3e26276ae3cc20eed1bd7
BAREBOX_VEXPRESS := barebox-$(BAREBOX_VEXPRESS_VERSION)
BAREBOX_VEXPRESS_SUFFIX := tar.bz2
BAREBOX_VEXPRESS_DIR := $(BUILDDIR)/barebox-vexpress-$(BAREBOX_VEXPRESS_VERSION)
--
2.20.1
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-03-07 15:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-07 13:22 [DistroKit] [PATCH] platform-v7a: barebox bump v2019.01.0 → v2019.03.0 Rouven Czerwinski
2019-03-07 15:38 ` Robert Schwebel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox