* [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver
@ 2018-02-19 14:12 Roland Hieber
2018-02-19 14:12 ` [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver Roland Hieber
2018-02-19 14:15 ` [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Robert Schwebel
0 siblings, 2 replies; 4+ messages in thread
From: Roland Hieber @ 2018-02-19 14:12 UTC (permalink / raw)
To: distrokit; +Cc: Roland Hieber
SPI is a useful thing to have, especially if you want to read your
barebox-env from SPI-NOR, like some boards do.
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
configs/platform-v7a/barebox-mx6.config | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index 70bdab8..cd90504 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -510,7 +510,7 @@ CONFIG_NET_USB_SMSC95XX=y
#
CONFIG_SPI=y
# CONFIG_DRIVER_SPI_GPIO is not set
-# CONFIG_DRIVER_SPI_IMX is not set
+CONFIG_DRIVER_SPI_IMX=y
CONFIG_DRIVER_SPI_IMX_2_3=y
# CONFIG_I2C is not set
CONFIG_MTD=y
--
2.11.0
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver
2018-02-19 14:12 [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Roland Hieber
@ 2018-02-19 14:12 ` Roland Hieber
2018-02-19 14:15 ` Robert Schwebel
2018-02-19 14:15 ` [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Robert Schwebel
1 sibling, 1 reply; 4+ messages in thread
From: Roland Hieber @ 2018-02-19 14:12 UTC (permalink / raw)
To: distrokit; +Cc: Roland Hieber
I2C is a useful thing to have in a generic barebox image.
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
configs/platform-v7a/barebox-mx6.config | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index cd90504..607653d 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -406,6 +406,7 @@ CONFIG_CMD_CLK=y
CONFIG_CMD_DETECT=y
CONFIG_CMD_FLASH=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_LED=y
CONFIG_CMD_NAND=y
CONFIG_CMD_NANDTEST=y
@@ -512,7 +513,16 @@ CONFIG_SPI=y
# CONFIG_DRIVER_SPI_GPIO is not set
CONFIG_DRIVER_SPI_IMX=y
CONFIG_DRIVER_SPI_IMX_2_3=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_MUX is not set
CONFIG_MTD=y
CONFIG_MTD_WRITE=y
CONFIG_MTD_OOB_DEVICE=y
@@ -602,16 +612,19 @@ CONFIG_USB_GADGET_FASTBOOT=y
# CONFIG_USB_MUSB is not set
CONFIG_VIDEO=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set
CONFIG_VIDEO_VPL=y
CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
# CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL is not set
CONFIG_DRIVER_VIDEO_SIMPLEFB=y
+# CONFIG_DRIVER_VIDEO_EDID is not set
# CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
#
# Video encoder chips
#
+# CONFIG_DRIVER_VIDEO_MTL017 is not set
# CONFIG_DRIVER_VIDEO_SIMPLE_PANEL is not set
CONFIG_MCI=y
@@ -639,8 +652,17 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
#
# MFD
#
+# CONFIG_MFD_ACT8846 is not set
+# CONFIG_MFD_DA9053 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_LP3972 is not set
# CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC34704 is not set
+# CONFIG_MFD_MC9SDZ60 is not set
+# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_TWL4030 is not set
+# CONFIG_MFD_TWL6030 is not set
#
# Misc devices
@@ -660,6 +682,7 @@ CONFIG_LED_TRIGGERS=y
# EEPROM support
#
CONFIG_EEPROM_AT25=y
+# CONFIG_EEPROM_AT24 is not set
#
# Input device support
@@ -667,6 +690,7 @@ CONFIG_EEPROM_AT25=y
CONFIG_INPUT=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_IMX_KEYPAD is not set
+# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_USB is not set
CONFIG_WATCHDOG_IMX_RESET_SOURCE=y
CONFIG_WATCHDOG=y
@@ -691,7 +715,9 @@ CONFIG_GPIO_IMX=y
# CONFIG_GPIO_VF610 is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_OMAP is not set
+# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_DESIGNWARE is not set
+# CONFIG_GPIO_SX150X is not set
# CONFIG_W1 is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX_IOMUX_V3=y
@@ -704,6 +730,7 @@ CONFIG_PINCTRL_IMX_IOMUX_V3=y
# CONFIG_IMX_WEIM is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED=y
+# CONFIG_REGULATOR_PFUZE is not set
# CONFIG_RESET_CONTROLLER is not set
CONFIG_HW_HAS_PCI=y
--
2.11.0
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver
2018-02-19 14:12 [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Roland Hieber
2018-02-19 14:12 ` [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver Roland Hieber
@ 2018-02-19 14:15 ` Robert Schwebel
1 sibling, 0 replies; 4+ messages in thread
From: Robert Schwebel @ 2018-02-19 14:15 UTC (permalink / raw)
To: Roland Hieber; +Cc: distrokit
On Mon, Feb 19, 2018 at 03:12:53PM +0100, Roland Hieber wrote:
> SPI is a useful thing to have, especially if you want to read your
> barebox-env from SPI-NOR, like some boards do.
>
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> configs/platform-v7a/barebox-mx6.config | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
> index 70bdab8..cd90504 100644
> --- a/configs/platform-v7a/barebox-mx6.config
> +++ b/configs/platform-v7a/barebox-mx6.config
> @@ -510,7 +510,7 @@ CONFIG_NET_USB_SMSC95XX=y
> #
> CONFIG_SPI=y
> # CONFIG_DRIVER_SPI_GPIO is not set
> -# CONFIG_DRIVER_SPI_IMX is not set
> +CONFIG_DRIVER_SPI_IMX=y
> CONFIG_DRIVER_SPI_IMX_2_3=y
> # CONFIG_I2C is not set
> CONFIG_MTD=y
> --
> 2.11.0
Merged, thx.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver
2018-02-19 14:12 ` [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver Roland Hieber
@ 2018-02-19 14:15 ` Robert Schwebel
0 siblings, 0 replies; 4+ messages in thread
From: Robert Schwebel @ 2018-02-19 14:15 UTC (permalink / raw)
To: Roland Hieber; +Cc: distrokit
On Mon, Feb 19, 2018 at 03:12:54PM +0100, Roland Hieber wrote:
> I2C is a useful thing to have in a generic barebox image.
>
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> configs/platform-v7a/barebox-mx6.config | 29 ++++++++++++++++++++++++++++-
> 1 file changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
> index cd90504..607653d 100644
> --- a/configs/platform-v7a/barebox-mx6.config
> +++ b/configs/platform-v7a/barebox-mx6.config
> @@ -406,6 +406,7 @@ CONFIG_CMD_CLK=y
> CONFIG_CMD_DETECT=y
> CONFIG_CMD_FLASH=y
> CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> CONFIG_CMD_LED=y
> CONFIG_CMD_NAND=y
> CONFIG_CMD_NANDTEST=y
> @@ -512,7 +513,16 @@ CONFIG_SPI=y
> # CONFIG_DRIVER_SPI_GPIO is not set
> CONFIG_DRIVER_SPI_IMX=y
> CONFIG_DRIVER_SPI_IMX_2_3=y
> -# CONFIG_I2C is not set
> +CONFIG_I2C=y
> +
> +#
> +# I2C Hardware Bus support
> +#
> +# CONFIG_I2C_GPIO is not set
> +CONFIG_I2C_IMX=y
> +# CONFIG_I2C_DESIGNWARE is not set
> +# CONFIG_I2C_MV64XXX is not set
> +# CONFIG_I2C_MUX is not set
> CONFIG_MTD=y
> CONFIG_MTD_WRITE=y
> CONFIG_MTD_OOB_DEVICE=y
> @@ -602,16 +612,19 @@ CONFIG_USB_GADGET_FASTBOOT=y
> # CONFIG_USB_MUSB is not set
> CONFIG_VIDEO=y
> # CONFIG_FRAMEBUFFER_CONSOLE is not set
> +# CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set
> CONFIG_VIDEO_VPL=y
> CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
> CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
> # CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL is not set
> CONFIG_DRIVER_VIDEO_SIMPLEFB=y
> +# CONFIG_DRIVER_VIDEO_EDID is not set
> # CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
>
> #
> # Video encoder chips
> #
> +# CONFIG_DRIVER_VIDEO_MTL017 is not set
> # CONFIG_DRIVER_VIDEO_SIMPLE_PANEL is not set
> CONFIG_MCI=y
>
> @@ -639,8 +652,17 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
> #
> # MFD
> #
> +# CONFIG_MFD_ACT8846 is not set
> +# CONFIG_MFD_DA9053 is not set
> +# CONFIG_MFD_DA9063 is not set
> +# CONFIG_MFD_LP3972 is not set
> # CONFIG_MFD_MC13XXX is not set
> +# CONFIG_MFD_MC34704 is not set
> +# CONFIG_MFD_MC9SDZ60 is not set
> +# CONFIG_MFD_STMPE is not set
> # CONFIG_MFD_SYSCON is not set
> +# CONFIG_MFD_TWL4030 is not set
> +# CONFIG_MFD_TWL6030 is not set
>
> #
> # Misc devices
> @@ -660,6 +682,7 @@ CONFIG_LED_TRIGGERS=y
> # EEPROM support
> #
> CONFIG_EEPROM_AT25=y
> +# CONFIG_EEPROM_AT24 is not set
>
> #
> # Input device support
> @@ -667,6 +690,7 @@ CONFIG_EEPROM_AT25=y
> CONFIG_INPUT=y
> CONFIG_KEYBOARD_GPIO=y
> # CONFIG_KEYBOARD_IMX_KEYPAD is not set
> +# CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_USB is not set
> CONFIG_WATCHDOG_IMX_RESET_SOURCE=y
> CONFIG_WATCHDOG=y
> @@ -691,7 +715,9 @@ CONFIG_GPIO_IMX=y
> # CONFIG_GPIO_VF610 is not set
> # CONFIG_GPIO_MXS is not set
> # CONFIG_GPIO_OMAP is not set
> +# CONFIG_GPIO_PCA953X is not set
> # CONFIG_GPIO_DESIGNWARE is not set
> +# CONFIG_GPIO_SX150X is not set
> # CONFIG_W1 is not set
> CONFIG_PINCTRL=y
> CONFIG_PINCTRL_IMX_IOMUX_V3=y
> @@ -704,6 +730,7 @@ CONFIG_PINCTRL_IMX_IOMUX_V3=y
> # CONFIG_IMX_WEIM is not set
> CONFIG_REGULATOR=y
> CONFIG_REGULATOR_FIXED=y
> +# CONFIG_REGULATOR_PFUZE is not set
> # CONFIG_RESET_CONTROLLER is not set
> CONFIG_HW_HAS_PCI=y
>
> --
> 2.11.0
Merged, thx.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-02-19 14:15 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-19 14:12 [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Roland Hieber
2018-02-19 14:12 ` [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver Roland Hieber
2018-02-19 14:15 ` Robert Schwebel
2018-02-19 14:15 ` [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Robert Schwebel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox