[DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver

[Roland Hieber <r.hieber@pengutronix.de>]

I2C is a useful thing to have in a generic barebox image.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
 configs/platform-v7a/barebox-mx6.config | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index cd90504..607653d 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -406,6 +406,7 @@ CONFIG_CMD_CLK=y
 CONFIG_CMD_DETECT=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NANDTEST=y
@@ -512,7 +513,16 @@ CONFIG_SPI=y
 # CONFIG_DRIVER_SPI_GPIO is not set
 CONFIG_DRIVER_SPI_IMX=y
 CONFIG_DRIVER_SPI_IMX_2_3=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_MUX is not set
 CONFIG_MTD=y
 CONFIG_MTD_WRITE=y
 CONFIG_MTD_OOB_DEVICE=y
@@ -602,16 +612,19 @@ CONFIG_USB_GADGET_FASTBOOT=y
 # CONFIG_USB_MUSB is not set
 CONFIG_VIDEO=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set
 CONFIG_VIDEO_VPL=y
 CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
 CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
 # CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL is not set
 CONFIG_DRIVER_VIDEO_SIMPLEFB=y
+# CONFIG_DRIVER_VIDEO_EDID is not set
 # CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
 
 #
 # Video encoder chips
 #
+# CONFIG_DRIVER_VIDEO_MTL017 is not set
 # CONFIG_DRIVER_VIDEO_SIMPLE_PANEL is not set
 CONFIG_MCI=y
 
@@ -639,8 +652,17 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
 #
 # MFD
 #
+# CONFIG_MFD_ACT8846 is not set
+# CONFIG_MFD_DA9053 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_LP3972 is not set
 # CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC34704 is not set
+# CONFIG_MFD_MC9SDZ60 is not set
+# CONFIG_MFD_STMPE is not set
 # CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_TWL4030 is not set
+# CONFIG_MFD_TWL6030 is not set
 
 #
 # Misc devices
@@ -660,6 +682,7 @@ CONFIG_LED_TRIGGERS=y
 # EEPROM support
 #
 CONFIG_EEPROM_AT25=y
+# CONFIG_EEPROM_AT24 is not set
 
 #
 # Input device support
@@ -667,6 +690,7 @@ CONFIG_EEPROM_AT25=y
 CONFIG_INPUT=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_KEYBOARD_IMX_KEYPAD is not set
+# CONFIG_KEYBOARD_QT1070 is not set
 # CONFIG_KEYBOARD_USB is not set
 CONFIG_WATCHDOG_IMX_RESET_SOURCE=y
 CONFIG_WATCHDOG=y
@@ -691,7 +715,9 @@ CONFIG_GPIO_IMX=y
 # CONFIG_GPIO_VF610 is not set
 # CONFIG_GPIO_MXS is not set
 # CONFIG_GPIO_OMAP is not set
+# CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_DESIGNWARE is not set
+# CONFIG_GPIO_SX150X is not set
 # CONFIG_W1 is not set
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX_IOMUX_V3=y
@@ -704,6 +730,7 @@ CONFIG_PINCTRL_IMX_IOMUX_V3=y
 # CONFIG_IMX_WEIM is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED=y
+# CONFIG_REGULATOR_PFUZE is not set
 # CONFIG_RESET_CONTROLLER is not set
 CONFIG_HW_HAS_PCI=y
 
-- 
2.11.0


_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de