* [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver @ 2018-02-19 14:12 Roland Hieber 2018-02-19 14:12 ` [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver Roland Hieber 2018-02-19 14:15 ` [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Robert Schwebel 0 siblings, 2 replies; 4+ messages in thread From: Roland Hieber @ 2018-02-19 14:12 UTC (permalink / raw) To: distrokit; +Cc: Roland Hieber SPI is a useful thing to have, especially if you want to read your barebox-env from SPI-NOR, like some boards do. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de> --- configs/platform-v7a/barebox-mx6.config | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config index 70bdab8..cd90504 100644 --- a/configs/platform-v7a/barebox-mx6.config +++ b/configs/platform-v7a/barebox-mx6.config @@ -510,7 +510,7 @@ CONFIG_NET_USB_SMSC95XX=y # CONFIG_SPI=y # CONFIG_DRIVER_SPI_GPIO is not set -# CONFIG_DRIVER_SPI_IMX is not set +CONFIG_DRIVER_SPI_IMX=y CONFIG_DRIVER_SPI_IMX_2_3=y # CONFIG_I2C is not set CONFIG_MTD=y -- 2.11.0 _______________________________________________ DistroKit mailing list DistroKit@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver 2018-02-19 14:12 [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Roland Hieber @ 2018-02-19 14:12 ` Roland Hieber 2018-02-19 14:15 ` Robert Schwebel 2018-02-19 14:15 ` [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Robert Schwebel 1 sibling, 1 reply; 4+ messages in thread From: Roland Hieber @ 2018-02-19 14:12 UTC (permalink / raw) To: distrokit; +Cc: Roland Hieber I2C is a useful thing to have in a generic barebox image. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de> --- configs/platform-v7a/barebox-mx6.config | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config index cd90504..607653d 100644 --- a/configs/platform-v7a/barebox-mx6.config +++ b/configs/platform-v7a/barebox-mx6.config @@ -406,6 +406,7 @@ CONFIG_CMD_CLK=y CONFIG_CMD_DETECT=y CONFIG_CMD_FLASH=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_LED=y CONFIG_CMD_NAND=y CONFIG_CMD_NANDTEST=y @@ -512,7 +513,16 @@ CONFIG_SPI=y # CONFIG_DRIVER_SPI_GPIO is not set CONFIG_DRIVER_SPI_IMX=y CONFIG_DRIVER_SPI_IMX_2_3=y -# CONFIG_I2C is not set +CONFIG_I2C=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_MV64XXX is not set +# CONFIG_I2C_MUX is not set CONFIG_MTD=y CONFIG_MTD_WRITE=y CONFIG_MTD_OOB_DEVICE=y @@ -602,16 +612,19 @@ CONFIG_USB_GADGET_FASTBOOT=y # CONFIG_USB_MUSB is not set CONFIG_VIDEO=y # CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set CONFIG_VIDEO_VPL=y CONFIG_DRIVER_VIDEO_IMX_IPUV3=y CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y # CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL is not set CONFIG_DRIVER_VIDEO_SIMPLEFB=y +# CONFIG_DRIVER_VIDEO_EDID is not set # CONFIG_DRIVER_VIDEO_BACKLIGHT is not set # # Video encoder chips # +# CONFIG_DRIVER_VIDEO_MTL017 is not set # CONFIG_DRIVER_VIDEO_SIMPLE_PANEL is not set CONFIG_MCI=y @@ -639,8 +652,17 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000 # # MFD # +# CONFIG_MFD_ACT8846 is not set +# CONFIG_MFD_DA9053 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_LP3972 is not set # CONFIG_MFD_MC13XXX is not set +# CONFIG_MFD_MC34704 is not set +# CONFIG_MFD_MC9SDZ60 is not set +# CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set +# CONFIG_MFD_TWL4030 is not set +# CONFIG_MFD_TWL6030 is not set # # Misc devices @@ -660,6 +682,7 @@ CONFIG_LED_TRIGGERS=y # EEPROM support # CONFIG_EEPROM_AT25=y +# CONFIG_EEPROM_AT24 is not set # # Input device support @@ -667,6 +690,7 @@ CONFIG_EEPROM_AT25=y CONFIG_INPUT=y CONFIG_KEYBOARD_GPIO=y # CONFIG_KEYBOARD_IMX_KEYPAD is not set +# CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_USB is not set CONFIG_WATCHDOG_IMX_RESET_SOURCE=y CONFIG_WATCHDOG=y @@ -691,7 +715,9 @@ CONFIG_GPIO_IMX=y # CONFIG_GPIO_VF610 is not set # CONFIG_GPIO_MXS is not set # CONFIG_GPIO_OMAP is not set +# CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_DESIGNWARE is not set +# CONFIG_GPIO_SX150X is not set # CONFIG_W1 is not set CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX_IOMUX_V3=y @@ -704,6 +730,7 @@ CONFIG_PINCTRL_IMX_IOMUX_V3=y # CONFIG_IMX_WEIM is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED=y +# CONFIG_REGULATOR_PFUZE is not set # CONFIG_RESET_CONTROLLER is not set CONFIG_HW_HAS_PCI=y -- 2.11.0 _______________________________________________ DistroKit mailing list DistroKit@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver 2018-02-19 14:12 ` [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver Roland Hieber @ 2018-02-19 14:15 ` Robert Schwebel 0 siblings, 0 replies; 4+ messages in thread From: Robert Schwebel @ 2018-02-19 14:15 UTC (permalink / raw) To: Roland Hieber; +Cc: distrokit On Mon, Feb 19, 2018 at 03:12:54PM +0100, Roland Hieber wrote: > I2C is a useful thing to have in a generic barebox image. > > Signed-off-by: Roland Hieber <r.hieber@pengutronix.de> > --- > configs/platform-v7a/barebox-mx6.config | 29 ++++++++++++++++++++++++++++- > 1 file changed, 28 insertions(+), 1 deletion(-) > > diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config > index cd90504..607653d 100644 > --- a/configs/platform-v7a/barebox-mx6.config > +++ b/configs/platform-v7a/barebox-mx6.config > @@ -406,6 +406,7 @@ CONFIG_CMD_CLK=y > CONFIG_CMD_DETECT=y > CONFIG_CMD_FLASH=y > CONFIG_CMD_GPIO=y > +CONFIG_CMD_I2C=y > CONFIG_CMD_LED=y > CONFIG_CMD_NAND=y > CONFIG_CMD_NANDTEST=y > @@ -512,7 +513,16 @@ CONFIG_SPI=y > # CONFIG_DRIVER_SPI_GPIO is not set > CONFIG_DRIVER_SPI_IMX=y > CONFIG_DRIVER_SPI_IMX_2_3=y > -# CONFIG_I2C is not set > +CONFIG_I2C=y > + > +# > +# I2C Hardware Bus support > +# > +# CONFIG_I2C_GPIO is not set > +CONFIG_I2C_IMX=y > +# CONFIG_I2C_DESIGNWARE is not set > +# CONFIG_I2C_MV64XXX is not set > +# CONFIG_I2C_MUX is not set > CONFIG_MTD=y > CONFIG_MTD_WRITE=y > CONFIG_MTD_OOB_DEVICE=y > @@ -602,16 +612,19 @@ CONFIG_USB_GADGET_FASTBOOT=y > # CONFIG_USB_MUSB is not set > CONFIG_VIDEO=y > # CONFIG_FRAMEBUFFER_CONSOLE is not set > +# CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set > CONFIG_VIDEO_VPL=y > CONFIG_DRIVER_VIDEO_IMX_IPUV3=y > CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y > # CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL is not set > CONFIG_DRIVER_VIDEO_SIMPLEFB=y > +# CONFIG_DRIVER_VIDEO_EDID is not set > # CONFIG_DRIVER_VIDEO_BACKLIGHT is not set > > # > # Video encoder chips > # > +# CONFIG_DRIVER_VIDEO_MTL017 is not set > # CONFIG_DRIVER_VIDEO_SIMPLE_PANEL is not set > CONFIG_MCI=y > > @@ -639,8 +652,17 @@ CONFIG_CLOCKSOURCE_DUMMY_RATE=1000 > # > # MFD > # > +# CONFIG_MFD_ACT8846 is not set > +# CONFIG_MFD_DA9053 is not set > +# CONFIG_MFD_DA9063 is not set > +# CONFIG_MFD_LP3972 is not set > # CONFIG_MFD_MC13XXX is not set > +# CONFIG_MFD_MC34704 is not set > +# CONFIG_MFD_MC9SDZ60 is not set > +# CONFIG_MFD_STMPE is not set > # CONFIG_MFD_SYSCON is not set > +# CONFIG_MFD_TWL4030 is not set > +# CONFIG_MFD_TWL6030 is not set > > # > # Misc devices > @@ -660,6 +682,7 @@ CONFIG_LED_TRIGGERS=y > # EEPROM support > # > CONFIG_EEPROM_AT25=y > +# CONFIG_EEPROM_AT24 is not set > > # > # Input device support > @@ -667,6 +690,7 @@ CONFIG_EEPROM_AT25=y > CONFIG_INPUT=y > CONFIG_KEYBOARD_GPIO=y > # CONFIG_KEYBOARD_IMX_KEYPAD is not set > +# CONFIG_KEYBOARD_QT1070 is not set > # CONFIG_KEYBOARD_USB is not set > CONFIG_WATCHDOG_IMX_RESET_SOURCE=y > CONFIG_WATCHDOG=y > @@ -691,7 +715,9 @@ CONFIG_GPIO_IMX=y > # CONFIG_GPIO_VF610 is not set > # CONFIG_GPIO_MXS is not set > # CONFIG_GPIO_OMAP is not set > +# CONFIG_GPIO_PCA953X is not set > # CONFIG_GPIO_DESIGNWARE is not set > +# CONFIG_GPIO_SX150X is not set > # CONFIG_W1 is not set > CONFIG_PINCTRL=y > CONFIG_PINCTRL_IMX_IOMUX_V3=y > @@ -704,6 +730,7 @@ CONFIG_PINCTRL_IMX_IOMUX_V3=y > # CONFIG_IMX_WEIM is not set > CONFIG_REGULATOR=y > CONFIG_REGULATOR_FIXED=y > +# CONFIG_REGULATOR_PFUZE is not set > # CONFIG_RESET_CONTROLLER is not set > CONFIG_HW_HAS_PCI=y > > -- > 2.11.0 Merged, thx. rsc -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ DistroKit mailing list DistroKit@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver 2018-02-19 14:12 [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Roland Hieber 2018-02-19 14:12 ` [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver Roland Hieber @ 2018-02-19 14:15 ` Robert Schwebel 1 sibling, 0 replies; 4+ messages in thread From: Robert Schwebel @ 2018-02-19 14:15 UTC (permalink / raw) To: Roland Hieber; +Cc: distrokit On Mon, Feb 19, 2018 at 03:12:53PM +0100, Roland Hieber wrote: > SPI is a useful thing to have, especially if you want to read your > barebox-env from SPI-NOR, like some boards do. > > Signed-off-by: Roland Hieber <r.hieber@pengutronix.de> > --- > configs/platform-v7a/barebox-mx6.config | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config > index 70bdab8..cd90504 100644 > --- a/configs/platform-v7a/barebox-mx6.config > +++ b/configs/platform-v7a/barebox-mx6.config > @@ -510,7 +510,7 @@ CONFIG_NET_USB_SMSC95XX=y > # > CONFIG_SPI=y > # CONFIG_DRIVER_SPI_GPIO is not set > -# CONFIG_DRIVER_SPI_IMX is not set > +CONFIG_DRIVER_SPI_IMX=y > CONFIG_DRIVER_SPI_IMX_2_3=y > # CONFIG_I2C is not set > CONFIG_MTD=y > -- > 2.11.0 Merged, thx. rsc -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ DistroKit mailing list DistroKit@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-02-19 14:15 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-02-19 14:12 [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Roland Hieber 2018-02-19 14:12 ` [DistroKit] [PATCH 2/2] platform-v7a: barebox-mx6: enable i.MX I2C driver Roland Hieber 2018-02-19 14:15 ` Robert Schwebel 2018-02-19 14:15 ` [DistroKit] [PATCH 1/2] platform-v7a: barebox-mx6: enable i.MX SPI driver Robert Schwebel
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox