From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Thu, 06 Jul 2023 14:20:48 +0200 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1qHNyb-0005Rt-Gw for lore@lore.pengutronix.de; Thu, 06 Jul 2023 14:20:48 +0200 Received: from localhost ([127.0.0.1] helo=metis.ext.pengutronix.de) by metis.ext.pengutronix.de with esmtp (Exim 4.92) (envelope-from ) id 1qHNyY-0000pj-Lr; Thu, 06 Jul 2023 14:20:46 +0200 Received: from ptz.office.stw.pengutronix.de ([2a0a:edc0:0:900:1d::77] helo=[127.0.0.1]) by metis.ext.pengutronix.de with esmtp (Exim 4.92) (envelope-from ) id 1qHNyV-0000pJ-KE; Thu, 06 Jul 2023 14:20:43 +0200 Message-ID: Date: Thu, 6 Jul 2023 14:20:43 +0200 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.11.2 Content-Language: en-US To: Oleksij Rempel , distrokit@pengutronix.de References: <20230706114434.1751248-1-o.rempel@pengutronix.de> From: Ahmad Fatoum In-Reply-To: <20230706114434.1751248-1-o.rempel@pengutronix.de> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [DistroKit] =?utf-8?q?=5BPATCH_v1_1/5=5D_v7a=5Fnoneon=3A_barebox?= =?utf-8?q?=3A_version_bump_v2023=2E01=2E0_=E2=86=92_v2023=2E07=2E1?= X-BeenThere: distrokit@pengutronix.de X-Mailman-Version: 2.1.29 Precedence: list List-Id: DistroKit Mailinglist List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "DistroKit" X-SA-Exim-Connect-IP: 127.0.0.1 X-SA-Exim-Mail-From: distrokit-bounces@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false On 06.07.23 13:44, Oleksij Rempel wrote: > This version updated includes some patches for the Microchip KSZ9477 > and support for the Microchip SAMA5D3 Ethernet Development System (EDS) > > Signed-off-by: Oleksij Rempel Reviewed-by: Ahmad Fatoum > --- > .../platform-v7a_noneon/barebox-at91.config | 66 ++++-- > .../barebox-at91.config.diff | 29 ++- > .../barebox-vexpress.config | 69 ++++-- > .../barebox-vexpress.config.diff | 9 +- > configs/platform-v7a_noneon/barebox.config | 74 ++++-- > ...nable-ddramc-for-sama5d3-and-sama5d4.patch | 32 +++ > ...port-for-SAMA5D3-Ethernet-Developmen.patch | 219 ++++++++++++++++++ > ...ip-ksz9477-evb-migrate-to-sama5d3_ba.patch | 23 ++ > ...0-customers-pengutronix-distrokit-sa.patch | 22 ++ > .../patches/barebox-2023.07.1/series | 13 ++ > configs/platform-v7a_noneon/platformconfig | 4 +- > 11 files changed, 476 insertions(+), 84 deletions(-) > create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch > create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch > create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch > create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch > create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/series > > diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config > index 9c18061..584bfae 100644 > --- a/configs/platform-v7a_noneon/barebox-at91.config > +++ b/configs/platform-v7a_noneon/barebox-at91.config > @@ -1,42 +1,35 @@ > # > # Automatically generated file; DO NOT EDIT. > -# Barebox/arm 2022.05.0 Configuration > +# Barebox/arm 2023.07.1-20230706-1 Configuration > # > CONFIG_ARM=y > CONFIG_ARM_LINUX=y > -CONFIG_HAVE_MACH_ARM_HEAD=y > CONFIG_ARM_USE_COMPRESSED_DTB=y > CONFIG_TEXT_BASE=0x0 > > # > # System Type > # > +# CONFIG_ARCH_MULTIARCH is not set > CONFIG_ARCH_AT91=y > -# CONFIG_ARCH_BCM283X is not set > # CONFIG_ARCH_CLPS711X is not set > # CONFIG_ARCH_DAVINCI is not set > # CONFIG_ARCH_DIGIC is not set > # CONFIG_ARCH_EP93XX is not set > -# CONFIG_ARCH_IMX is not set > # CONFIG_ARCH_LAYERSCAPE is not set > # CONFIG_ARCH_MVEBU is not set > # CONFIG_ARCH_MXS is not set > # CONFIG_ARCH_NOMADIK is not set > -# CONFIG_ARCH_OMAP is not set > +# CONFIG_ARCH_OMAP_SINGLE is not set > # CONFIG_ARCH_PXA is not set > -# CONFIG_ARCH_ROCKCHIP is not set > # CONFIG_ARCH_SOCFPGA is not set > -# CONFIG_ARCH_S3C24xx is not set > -# CONFIG_ARCH_S5PCxx is not set > -# CONFIG_ARCH_S3C64xx is not set > -# CONFIG_ARCH_STM32MP is not set > -# CONFIG_ARCH_VERSATILE is not set > -# CONFIG_ARCH_VEXPRESS is not set > # CONFIG_ARCH_TEGRA is not set > # CONFIG_ARCH_UEMD is not set > # CONFIG_ARCH_ZYNQ is not set > -# CONFIG_ARCH_ZYNQMP is not set > -# CONFIG_ARCH_ARM64_VIRT is not set > +# CONFIG_ARCH_BCM283X is not set > +# CONFIG_ARCH_STM32MP is not set > +# CONFIG_ARCH_VERSATILE is not set > +# CONFIG_ARCH_VEXPRESS is not set > > # > # Processor Type > @@ -53,10 +46,12 @@ CONFIG_HAVE_AT91_UTMI=y > CONFIG_HAVE_AT91_USB_CLK=y > CONFIG_COMMON_CLK_AT91=y > CONFIG_HAVE_AT91_SMD=y > +CONFIG_HAVE_AT91_DDRAMC=y > CONFIG_AT91_MCI_PBL=y > CONFIG_AT91SAM9_SMC=y > CONFIG_HAVE_AT91SAM9_RST=y > CONFIG_SOC_SAMA5=y > +CONFIG_SOC_SAMA5_MULTI=y > CONFIG_SOC_SAMA5D3=y > CONFIG_ARCH_TEXT_BASE=0x23f00000 > > @@ -68,19 +63,23 @@ CONFIG_AT91_MULTI_BOARDS=y > # CONFIG_MACH_AT91SAM9263EK is not set > # CONFIG_MACH_AT91SAM9X5EK is not set > CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y > +# CONFIG_MACH_MICROCHIP_SAMA5D3_EDS is not set > # CONFIG_MACH_SAMA5D3_XPLAINED is not set > # CONFIG_MACH_SAMA5D27_SOM1 is not set > # CONFIG_MACH_SAMA5D27_GIANTBOARD is not set > +# CONFIG_MACH_SAMA5D4_WIFX is not set > > # > # AT91 Board Options > # > -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff > # CONFIG_BOARD_ARM_GENERIC_DT is not set > CONFIG_AEABI=y > # CONFIG_ARM_BOARD_APPEND_ATAG is not set > # end of System Type > > +# CONFIG_64BIT is not set > +CONFIG_32BIT=y > + > # > # ARM specific settings > # > @@ -97,11 +96,10 @@ CONFIG_HAS_KALLSYMS=y > CONFIG_HAS_MODULES=y > CONFIG_HAS_CACHE=y > CONFIG_HAS_DMA=y > -CONFIG_HAS_ARCH_SJLJ=y > +CONFIG_ARCH_HAS_SJLJ=y > CONFIG_GENERIC_GPIO=y > CONFIG_BLOCK=y > CONFIG_BLOCK_WRITE=y > -CONFIG_USE_COMPRESSED_DTB=y > CONFIG_FILETYPE=y > CONFIG_BINFMT=y > CONFIG_UIMAGE=y > @@ -130,6 +128,7 @@ CONFIG_HAVE_PBL_MULTI_IMAGES=y > CONFIG_HAVE_IMAGE_COMPRESSION=y > CONFIG_PBL_IMAGE=y > CONFIG_PBL_MULTI_IMAGES=y > +CONFIG_USE_COMPRESSED_DTB=y > CONFIG_PBL_RELOCATABLE=y > CONFIG_IMAGE_COMPRESSION=y > # CONFIG_IMAGE_COMPRESSION_LZ4 is not set > @@ -138,7 +137,7 @@ CONFIG_IMAGE_COMPRESSION=y > # CONFIG_IMAGE_COMPRESSION_XZKERN is not set > CONFIG_IMAGE_COMPRESSION_NONE=y > CONFIG_MMU=y > -CONFIG_MMU_EARLY=y > +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff > CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff > CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff > CONFIG_STACK_SIZE=0x8000 > @@ -200,7 +199,6 @@ CONFIG_PARTITION_DISK_DOS=y > # CONFIG_PARTITION_DISK_EFI is not set > CONFIG_ENV_HANDLING=y > CONFIG_DEFAULT_ENVIRONMENT=y > -# CONFIG_DEFAULT_COMPRESSION_LZO is not set > CONFIG_DEFAULT_COMPRESSION_NONE=y > CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y > # CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG is not set > @@ -236,6 +234,7 @@ CONFIG_DEFAULT_LOGLEVEL=6 > # CONFIG_DEBUG_LL is not set > CONFIG_DEBUG_AT91_UART_BASE=0xffffee00 > # CONFIG_DEBUG_INITCALLS is not set > +# CONFIG_DEBUG_PBL is not set > # CONFIG_DEBUG_PROBES is not set > # CONFIG_PBL_BREAK is not set > # CONFIG_PRINTF_FULL is not set > @@ -244,6 +243,7 @@ CONFIG_HAVE_ARCH_KASAN=y > CONFIG_CC_HAS_KASAN_GENERIC=y > # CONFIG_KASAN is not set > # CONFIG_COMPILE_TEST is not set > +# CONFIG_WERROR is not set > # end of Debugging > > # > @@ -266,6 +266,7 @@ CONFIG_COMPILE_HASH=y > CONFIG_CMD_AT91CLK=y > CONFIG_CMD_ARM_CPUINFO=y > CONFIG_CMD_DEVINFO=y > +# CONFIG_CMD_DEVLOOKUP is not set > # CONFIG_CMD_DEVUNBIND is not set > CONFIG_CMD_DMESG=y > CONFIG_CMD_DRVINFO=y > @@ -337,6 +338,7 @@ CONFIG_CMD_DIRNAME=y > CONFIG_CMD_FILETYPE=y > CONFIG_CMD_LN=y > CONFIG_CMD_LS=y > +# CONFIG_CMD_STAT is not set > CONFIG_CMD_MD5SUM=y > CONFIG_CMD_MKDIR=y > CONFIG_CMD_PWD=y > @@ -427,15 +429,18 @@ CONFIG_CMD_USBGADGET=y > CONFIG_CMD_BAREBOX_UPDATE=y > # CONFIG_CMD_BLOBGEN is not set > # CONFIG_CMD_FIRMWARELOAD is not set > +# CONFIG_CMD_OF_COMPATIBLE is not set > # CONFIG_CMD_OF_DIFF is not set > CONFIG_CMD_OF_DUMP=y > CONFIG_CMD_OF_NODE=y > CONFIG_CMD_OF_PROPERTY=y > # CONFIG_CMD_OF_DISPLAY_TIMINGS is not set > +# CONFIG_CMD_OF_FIXUP is not set > # CONFIG_CMD_OF_FIXUP_STATUS is not set > # CONFIG_CMD_OF_OVERLAY is not set > CONFIG_CMD_OFTREE=y > CONFIG_CMD_TIME=y > +# CONFIG_CMD_UPTIME is not set > # CONFIG_CMD_DHRYSTONE is not set > # CONFIG_CMD_SPD_DECODE is not set > # CONFIG_CMD_SEED is not set > @@ -481,8 +486,9 @@ CONFIG_PHYLIB=y > # > # Network drivers > # > -# CONFIG_DRIVER_NET_DESIGNWARE is not set > -# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set > +# CONFIG_DRIVER_NET_ARC_EMAC is not set > +# CONFIG_DRIVER_NET_BCMGENET is not set > +# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set > # CONFIG_DRIVER_NET_ENC28J60 is not set > # CONFIG_DRIVER_NET_FSL_FMAN is not set > # CONFIG_DRIVER_NET_KS8851_MLL is not set > @@ -507,6 +513,7 @@ CONFIG_DRIVER_NET_MICREL=y > # CONFIG_LXT_PHY is not set > # CONFIG_MARVELL_PHY is not set > CONFIG_MICREL_PHY=y > +# CONFIG_MOTORCOMM_PHY is not set > # CONFIG_NATIONAL_PHY is not set > # CONFIG_REALTEK_PHY is not set > # CONFIG_SMSC_PHY is not set > @@ -618,6 +625,7 @@ CONFIG_HAVE_CLK=y > CONFIG_CLKDEV_LOOKUP=y > CONFIG_COMMON_CLK=y > CONFIG_COMMON_CLK_OF_PROVIDER=y > +CONFIG_COMMON_CLK_GPIO=y > > # > # Clocksource > @@ -634,6 +642,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y > # CONFIG_MFD_MC13XXX is not set > CONFIG_MFD_SYSCON=y > # CONFIG_MFD_ATMEL_FLEXCOM is not set > +CONFIG_MFD_ATMEL_SMC=y > # end of Multifunction device drivers > > # > @@ -685,6 +694,7 @@ CONFIG_GPIOLIB=y > # CONFIG_GPIO_GENERIC_PLATFORM is not set > # CONFIG_GPIO_DESIGNWARE is not set > # CONFIG_GPIO_SIFIVE is not set > +# CONFIG_GPIO_LATCH is not set > # end of GPIO > > CONFIG_W1=y > @@ -737,6 +747,7 @@ CONFIG_REGULATOR_FIXED=y > # Firmware Drivers > # > # CONFIG_FIRMWARE_ALTERA_SERIAL is not set > +# CONFIG_QEMU_FW_CFG is not set > # end of Firmware Drivers > > # > @@ -746,11 +757,16 @@ CONFIG_REGULATOR_FIXED=y > # end of FPGA Configuration Support > > # CONFIG_GENERIC_PHY is not set > -# CONFIG_CRYPTO_HW is not set > + > +# > +# Hardware crypto devices > +# > +# end of Hardware crypto devices > > # > # Memory controller drivers > # > +CONFIG_ATMEL_EBI=y > # end of Memory controller drivers > > # > @@ -801,6 +817,7 @@ CONFIG_FS_EXT4=y > CONFIG_FS_RAMFS=y > CONFIG_FS_DEVFS=y > CONFIG_FS_TFTP=y > +CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128 > CONFIG_FS_NFS=y > CONFIG_FS_FAT=y > CONFIG_FS_FAT_WRITE=y > @@ -858,11 +875,11 @@ CONFIG_IMAGE_SPARSE=y > # > # end of Library gui routines > > -# CONFIG_BAREBOX_LOGO is not set > -# CONFIG_NLS is not set > +CONFIG_NLS=y > # CONFIG_BLOBGEN is not set > CONFIG_ARCH_HAS_STACK_DUMP=y > CONFIG_ARCH_HAS_DATA_ABORT_MASK=y > +CONFIG_ARCH_HAS_ZERO_PAGE=y > # end of Library routines > > # > @@ -888,6 +905,7 @@ CONFIG_DIGEST_MD5_GENERIC=y > # Firmware files > # > CONFIG_EXTRA_FIRMWARE_DIR="firmware" > +CONFIG_MISSING_FIRMWARE_ERROR=y > # end of Firmware files > > # > diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff > index d4bd071..a183a3d 100644 > --- a/configs/platform-v7a_noneon/barebox-at91.config.diff > +++ b/configs/platform-v7a_noneon/barebox-at91.config.diff > @@ -1,16 +1,20 @@ > -503a2995018ed6b994350193b131ee59 > +1dedd85e90c7b6ae44712caf6c69913b > CONFIG_ARCH_AT91=y > # CONFIG_ARCH_BCM283X is not set > +# CONFIG_ARCH_IMX is undefined > +# CONFIG_ARCH_MULTIARCH is not set > +# CONFIG_ARCH_OMAP_MULTI is undefined > +# CONFIG_ARCH_ROCKCHIP is undefined > CONFIG_ARCH_TEXT_BASE=0x23f00000 > # CONFIG_ARM_AMBA is undefined > # CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set > # CONFIG_ARM_SCMI_PROTOCOL is undefined > # CONFIG_ARM_SECURE_MONITOR is undefined > # CONFIG_ARM_SMCCC is undefined > -CONFIG_ARM_USE_COMPRESSED_DTB=y > CONFIG_AT91SAM9_SMC=y > CONFIG_AT91_MCI_PBL=y > CONFIG_AT91_MULTI_BOARDS=y > +CONFIG_ATMEL_EBI=y > # CONFIG_BOARD_ARM_GENERIC_DT is not set > # CONFIG_BOARD_GENERIC_DT is undefined > CONFIG_BOOTM_OFTREE_UIMAGE=y > @@ -49,9 +53,7 @@ CONFIG_COMPILE_LOGLEVEL=6 > # CONFIG_CONSOLE_ACTIVATE_FIRST is not set > CONFIG_CONSOLE_ACTIVATE_NONE=y > CONFIG_DEBUG_AT91_UART_BASE=0xffffee00 > -# CONFIG_DEFAULT_COMPRESSION_BZIP2 is undefined > -# CONFIG_DEFAULT_COMPRESSION_GZIP is undefined > -# CONFIG_DEFAULT_COMPRESSION_XZ is undefined > +# CONFIG_DEBUG_PBL is not set > # CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU is undefined > # CONFIG_DIGEST_SHA1_GENERIC is not set > CONFIG_DRIVER_NET_MACB=y > @@ -70,14 +72,15 @@ CONFIG_DRIVER_SPI_ATMEL=y > # CONFIG_GPIO_WATCHDOG is undefined > CONFIG_HAS_MACB=y > CONFIG_HAVE_AT91SAM9_RST=y > +CONFIG_HAVE_AT91_DDRAMC=y > CONFIG_HAVE_AT91_SMD=y > CONFIG_HAVE_AT91_USB_CLK=y > CONFIG_HAVE_AT91_UTMI=y > # CONFIG_HAVE_DIGEST_SHA1 is undefined > -CONFIG_HAVE_MACH_ARM_HEAD=y > # CONFIG_HWRNG is not set > # CONFIG_I2C is not set > # CONFIG_I2C_ALGOBIT is undefined > +# CONFIG_I2C_BCM283X is undefined > # CONFIG_I2C_DESIGNWARE is undefined > # CONFIG_I2C_GPIO is undefined > # CONFIG_I2C_MUX is undefined > @@ -93,14 +96,18 @@ CONFIG_IMD_TARGET=y > # CONFIG_MACH_AT91SAM9263EK is not set > # CONFIG_MACH_AT91SAM9X5EK is not set > CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y > +# CONFIG_MACH_MICROCHIP_SAMA5D3_EDS is not set > # CONFIG_MACH_RPI2 is undefined > # CONFIG_MACH_RPI3 is undefined > +# CONFIG_MACH_RPI4 is undefined > # CONFIG_MACH_RPI is undefined > +# CONFIG_MACH_RPI_AARCH_32_64 is undefined > # CONFIG_MACH_RPI_CM3 is undefined > # CONFIG_MACH_RPI_COMMON is undefined > # CONFIG_MACH_SAMA5D27_GIANTBOARD is not set > # CONFIG_MACH_SAMA5D27_SOM1 is not set > # CONFIG_MACH_SAMA5D3_XPLAINED is not set > +# CONFIG_MACH_SAMA5D4_WIFX is not set > # CONFIG_MACH_SKOV_ARM9CPU is not set > CONFIG_MCI_ATMEL=y > CONFIG_MCI_ATMEL_PBL=y > @@ -111,20 +118,26 @@ CONFIG_MCI_ATMEL_SDHCI=y > CONFIG_MCI_MMC_BOOT_PARTITIONS=y > CONFIG_MCI_SDHCI=y > # CONFIG_MCI_STARTUP is not set > +# CONFIG_MEMTEST is undefined > # CONFIG_MENUTREE is undefined > # CONFIG_MFD_ACT8846 is undefined > +CONFIG_MFD_ATMEL_SMC=y > +# CONFIG_MFD_AXP20X_I2C is undefined > # CONFIG_MFD_DA9053 is undefined > # CONFIG_MFD_DA9063 is undefined > # CONFIG_MFD_LP3972 is undefined > # CONFIG_MFD_MC34704 is undefined > # CONFIG_MFD_MC9SDZ60 is undefined > +# CONFIG_MFD_RK808 is undefined > # CONFIG_MFD_RN568PMIC is undefined > +# CONFIG_MFD_ROHM_BD718XX is undefined > # CONFIG_MFD_STMPE is undefined > # CONFIG_MFD_STPMIC1 is undefined > CONFIG_MFD_SYSCON=y > # CONFIG_MFD_TWL4030 is undefined > # CONFIG_MFD_TWL6030 is undefined > CONFIG_MICREL_PHY=y > +# CONFIG_MMUINFO is undefined > CONFIG_MTD_M25P80=y > CONFIG_MTD_SPI_NOR=y > # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set > @@ -147,6 +160,7 @@ CONFIG_REGULATOR_FIXED=y > # CONFIG_SERIAL_AMBA_PL011 is undefined > CONFIG_SOC_SAMA5=y > CONFIG_SOC_SAMA5D3=y > +CONFIG_SOC_SAMA5_MULTI=y > CONFIG_SPI_ATMEL_QUADSPI=y > # CONFIG_SPI_CADENCE_QUADSPI is not set > CONFIG_SPI_MEM=y > @@ -158,6 +172,7 @@ CONFIG_SPI_MEM=y > # CONFIG_SYSTEMD_OF_WATCHDOG is undefined > CONFIG_SYSTEM_PARTITIONS=y > # CONFIG_THUMB2_BAREBOX is undefined > +# CONFIG_TYPEC_TUSB320 is undefined > # CONFIG_USB_DWC2_GADGET is undefined > # CONFIG_USB_DWC2_HOST is undefined > # CONFIG_USB_DWC3 is undefined > @@ -167,10 +182,10 @@ CONFIG_USB_GADGET_DUALSPEED=y > # CONFIG_USB_HOST is not set > # CONFIG_USB_HUB_USB251XB is undefined > # CONFIG_USB_NET_AX88179_178A is undefined > +# CONFIG_USB_ONBOARD_HUB is undefined > # CONFIG_USB_STORAGE is undefined > # CONFIG_USB_ULPI is undefined > # CONFIG_USB_XHCI is undefined > -CONFIG_USE_COMPRESSED_DTB=y > CONFIG_VIRTIO_MENU=y > # CONFIG_VIRTIO_MMIO is not set > CONFIG_W1=y > diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config > index 2caf92d..d2b7aa6 100644 > --- a/configs/platform-v7a_noneon/barebox-vexpress.config > +++ b/configs/platform-v7a_noneon/barebox-vexpress.config > @@ -1,6 +1,6 @@ > # > # Automatically generated file; DO NOT EDIT. > -# Barebox/arm 2022.05.0 Configuration > +# Barebox/arm 2023.07.1-20230706-1 Configuration > # > CONFIG_ARM=y > CONFIG_ARM_LINUX=y > @@ -9,32 +9,29 @@ CONFIG_TEXT_BASE=0x0 > # > # System Type > # > +CONFIG_ARCH_MULTIARCH=y > # CONFIG_ARCH_AT91 is not set > -# CONFIG_ARCH_BCM283X is not set > # CONFIG_ARCH_CLPS711X is not set > # CONFIG_ARCH_DAVINCI is not set > # CONFIG_ARCH_DIGIC is not set > # CONFIG_ARCH_EP93XX is not set > -# CONFIG_ARCH_IMX is not set > # CONFIG_ARCH_LAYERSCAPE is not set > # CONFIG_ARCH_MVEBU is not set > # CONFIG_ARCH_MXS is not set > # CONFIG_ARCH_NOMADIK is not set > -# CONFIG_ARCH_OMAP is not set > +# CONFIG_ARCH_OMAP_SINGLE is not set > # CONFIG_ARCH_PXA is not set > -# CONFIG_ARCH_ROCKCHIP is not set > # CONFIG_ARCH_SOCFPGA is not set > -# CONFIG_ARCH_S3C24xx is not set > -# CONFIG_ARCH_S5PCxx is not set > -# CONFIG_ARCH_S3C64xx is not set > -# CONFIG_ARCH_STM32MP is not set > -# CONFIG_ARCH_VERSATILE is not set > -CONFIG_ARCH_VEXPRESS=y > # CONFIG_ARCH_TEGRA is not set > # CONFIG_ARCH_UEMD is not set > # CONFIG_ARCH_ZYNQ is not set > -# CONFIG_ARCH_ZYNQMP is not set > -# CONFIG_ARCH_ARM64_VIRT is not set > +# CONFIG_ARCH_BCM283X is not set > +# CONFIG_ARCH_IMX is not set > +# CONFIG_ARCH_OMAP_MULTI is not set > +# CONFIG_ARCH_ROCKCHIP is not set > +# CONFIG_ARCH_STM32MP is not set > +# CONFIG_ARCH_VERSATILE is not set > +CONFIG_ARCH_VEXPRESS=y > > # > # Processor Type > @@ -48,7 +45,6 @@ CONFIG_CPU_32v7=y > # > # CONFIG_BOOT_ENDIANNESS_SWITCH is not set > CONFIG_ARCH_TEXT_BASE=0x0 > -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff > CONFIG_MACH_VEXPRESS=y > # CONFIG_MACH_VIRT is not set > CONFIG_BOARD_ARM_GENERIC_DT=y > @@ -57,6 +53,9 @@ CONFIG_AEABI=y > # CONFIG_ARM_BOARD_APPEND_ATAG is not set > # end of System Type > > +# CONFIG_64BIT is not set > +CONFIG_32BIT=y > + > # > # ARM specific settings > # > @@ -73,7 +72,7 @@ CONFIG_HAS_KALLSYMS=y > CONFIG_HAS_MODULES=y > CONFIG_HAS_CACHE=y > CONFIG_HAS_DMA=y > -CONFIG_HAS_ARCH_SJLJ=y > +CONFIG_ARCH_HAS_SJLJ=y > CONFIG_BLOCK=y > CONFIG_BLOCK_WRITE=y > CONFIG_FILETYPE=y > @@ -93,6 +92,7 @@ CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_BANNER=y > CONFIG_MEMINFO=y > +CONFIG_MEMTEST=y > CONFIG_ENVIRONMENT_VARIABLES=y > CONFIG_GLOBALVAR=y > CONFIG_NVVAR=y > @@ -114,7 +114,8 @@ CONFIG_IMAGE_COMPRESSION_LZO=y > # CONFIG_IMAGE_COMPRESSION_XZKERN is not set > # CONFIG_IMAGE_COMPRESSION_NONE is not set > CONFIG_MMU=y > -CONFIG_MMU_EARLY=y > +CONFIG_MMUINFO=y > +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff > CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff > CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff > CONFIG_STACK_SIZE=0x8000 > @@ -177,10 +178,6 @@ CONFIG_PARTITION_DISK_DOS=y > # CONFIG_PARTITION_DISK_EFI is not set > CONFIG_ENV_HANDLING=y > CONFIG_DEFAULT_ENVIRONMENT=y > -# CONFIG_DEFAULT_COMPRESSION_GZIP is not set > -# CONFIG_DEFAULT_COMPRESSION_BZIP2 is not set > -# CONFIG_DEFAULT_COMPRESSION_LZO is not set > -# CONFIG_DEFAULT_COMPRESSION_XZ is not set > CONFIG_DEFAULT_COMPRESSION_NONE=y > CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y > CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y > @@ -220,6 +217,7 @@ CONFIG_COMPILE_LOGLEVEL=7 > CONFIG_DEFAULT_LOGLEVEL=6 > # CONFIG_DEBUG_LL is not set > # CONFIG_DEBUG_INITCALLS is not set > +# CONFIG_DEBUG_PBL is not set > # CONFIG_DEBUG_PROBES is not set > # CONFIG_PBL_BREAK is not set > # CONFIG_PRINTF_FULL is not set > @@ -228,6 +226,7 @@ CONFIG_HAVE_ARCH_KASAN=y > CONFIG_CC_HAS_KASAN_GENERIC=y > # CONFIG_KASAN is not set > # CONFIG_COMPILE_TEST is not set > +# CONFIG_WERROR is not set > # end of Debugging > > # > @@ -249,6 +248,7 @@ CONFIG_COMPILE_HASH=y > # CONFIG_CMD_TUTORIAL is not set > CONFIG_CMD_ARM_CPUINFO=y > CONFIG_CMD_DEVINFO=y > +# CONFIG_CMD_DEVLOOKUP is not set > # CONFIG_CMD_DEVUNBIND is not set > CONFIG_CMD_DMESG=y > CONFIG_CMD_DRVINFO=y > @@ -319,6 +319,7 @@ CONFIG_CMD_DIRNAME=y > CONFIG_CMD_FILETYPE=y > CONFIG_CMD_LN=y > CONFIG_CMD_LS=y > +# CONFIG_CMD_STAT is not set > CONFIG_CMD_MD5SUM=y > CONFIG_CMD_MKDIR=y > CONFIG_CMD_PWD=y > @@ -413,15 +414,18 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0 > CONFIG_CMD_BAREBOX_UPDATE=y > # CONFIG_CMD_BLOBGEN is not set > # CONFIG_CMD_FIRMWARELOAD is not set > +# CONFIG_CMD_OF_COMPATIBLE is not set > # CONFIG_CMD_OF_DIFF is not set > CONFIG_CMD_OF_DUMP=y > CONFIG_CMD_OF_NODE=y > CONFIG_CMD_OF_PROPERTY=y > # CONFIG_CMD_OF_DISPLAY_TIMINGS is not set > +# CONFIG_CMD_OF_FIXUP is not set > CONFIG_CMD_OF_FIXUP_STATUS=y > CONFIG_CMD_OF_OVERLAY=y > CONFIG_CMD_OFTREE=y > CONFIG_CMD_TIME=y > +# CONFIG_CMD_UPTIME is not set > CONFIG_CMD_STATE=y > # CONFIG_CMD_DHRYSTONE is not set > # CONFIG_CMD_SPD_DECODE is not set > @@ -468,8 +472,9 @@ CONFIG_PHYLIB=y > # > # Network drivers > # > -# CONFIG_DRIVER_NET_DESIGNWARE is not set > -# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set > +# CONFIG_DRIVER_NET_ARC_EMAC is not set > +# CONFIG_DRIVER_NET_BCMGENET is not set > +# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set > # CONFIG_DRIVER_NET_ENC28J60 is not set > # CONFIG_DRIVER_NET_FSL_FMAN is not set > # CONFIG_DRIVER_NET_KS8851_MLL is not set > @@ -493,6 +498,7 @@ CONFIG_DRIVER_NET_SMC911X=y > # CONFIG_LXT_PHY is not set > # CONFIG_MARVELL_PHY is not set > # CONFIG_MICREL_PHY is not set > +# CONFIG_MOTORCOMM_PHY is not set > # CONFIG_NATIONAL_PHY is not set > # CONFIG_REALTEK_PHY is not set > # CONFIG_SMSC_PHY is not set > @@ -588,6 +594,8 @@ CONFIG_USB_STORAGE=y > # USB Miscellaneous drivers > # > # CONFIG_USB_HUB_USB251XB is not set > +# CONFIG_USB_ONBOARD_HUB is not set > +# CONFIG_TYPEC_TUSB320 is not set > CONFIG_USB_GADGET=y > CONFIG_USB_GADGET_AUTOSTART=y > > @@ -624,6 +632,7 @@ CONFIG_HAVE_CLK=y > CONFIG_CLKDEV_LOOKUP=y > CONFIG_COMMON_CLK=y > CONFIG_COMMON_CLK_OF_PROVIDER=y > +CONFIG_COMMON_CLK_GPIO=y > > # > # Clocksource > @@ -651,6 +660,9 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y > # CONFIG_MFD_STPMIC1 is not set > # CONFIG_MFD_RN568PMIC is not set > # CONFIG_MFD_ATMEL_FLEXCOM is not set > +# CONFIG_MFD_RK808 is not set > +# CONFIG_MFD_AXP20X_I2C is not set > +# CONFIG_MFD_ROHM_BD718XX is not set > # end of Multifunction device drivers > > # > @@ -722,6 +734,7 @@ CONFIG_REGULATOR=y > # > # Firmware Drivers > # > +# CONFIG_QEMU_FW_CFG is not set > # end of Firmware Drivers > > # > @@ -731,7 +744,11 @@ CONFIG_REGULATOR=y > # end of FPGA Configuration Support > > # CONFIG_GENERIC_PHY is not set > -# CONFIG_CRYPTO_HW is not set > + > +# > +# Hardware crypto devices > +# > +# end of Hardware crypto devices > > # > # Memory controller drivers > @@ -782,6 +799,7 @@ CONFIG_FS_EXT4=y > CONFIG_FS_RAMFS=y > CONFIG_FS_DEVFS=y > CONFIG_FS_TFTP=y > +CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128 > CONFIG_FS_NFS=y > CONFIG_FS_FAT=y > CONFIG_FS_FAT_WRITE=y > @@ -846,11 +864,11 @@ CONFIG_LIBFDT=y > # > # end of Library gui routines > > -# CONFIG_BAREBOX_LOGO is not set > -# CONFIG_NLS is not set > +CONFIG_NLS=y > # CONFIG_BLOBGEN is not set > CONFIG_ARCH_HAS_STACK_DUMP=y > CONFIG_ARCH_HAS_DATA_ABORT_MASK=y > +CONFIG_ARCH_HAS_ZERO_PAGE=y > # end of Library routines > > # > @@ -877,6 +895,7 @@ CONFIG_DIGEST_SHA1_GENERIC=y > # Firmware files > # > CONFIG_EXTRA_FIRMWARE_DIR="firmware" > +CONFIG_MISSING_FIRMWARE_ERROR=y > # end of Firmware files > > # > diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff > index ea72472..fff891e 100644 > --- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff > +++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff > @@ -1,16 +1,18 @@ > -503a2995018ed6b994350193b131ee59 > +1dedd85e90c7b6ae44712caf6c69913b > CONFIG_AMBA_SP804=y > # CONFIG_ARCH_BCM283X is not set > CONFIG_ARCH_VEXPRESS=y > # CONFIG_ARM_SCMI_PROTOCOL is undefined > # CONFIG_ARM_SECURE_MONITOR is undefined > # CONFIG_ARM_SMCCC is undefined > +# CONFIG_ARM_USE_COMPRESSED_DTB is undefined > # CONFIG_CFI_BUFFER_WRITE is not set > # CONFIG_CLOCKSOURCE_BCM283X is undefined > # CONFIG_CMD_GPIO is undefined > # CONFIG_CMD_SMC is undefined > CONFIG_CONSOLE_ACTIVATE_ALL=y > # CONFIG_CONSOLE_ACTIVATE_FIRST is not set > +# CONFIG_DEBUG_PBL is not set > CONFIG_DRIVER_CFI=y > CONFIG_DRIVER_CFI_AMD=y > CONFIG_DRIVER_CFI_BANK_WIDTH_1=y > @@ -27,6 +29,7 @@ CONFIG_DRIVER_NET_SMC911X=y > # CONFIG_GPIO_74XX_MMIO is undefined > # CONFIG_GPIO_DESIGNWARE is undefined > # CONFIG_GPIO_GENERIC_PLATFORM is undefined > +# CONFIG_GPIO_LATCH is undefined > # CONFIG_GPIO_PCA953X is undefined > # CONFIG_GPIO_PCF857X is undefined > # CONFIG_GPIO_PL061 is undefined > @@ -35,6 +38,7 @@ CONFIG_DRIVER_NET_SMC911X=y > # CONFIG_GPIO_SX150X is undefined > # CONFIG_GPIO_WATCHDOG is undefined > # CONFIG_I2C_ALGOBIT is undefined > +# CONFIG_I2C_BCM283X is undefined > # CONFIG_I2C_GPIO is undefined > # CONFIG_JTAG is undefined > # CONFIG_KEYBOARD_GPIO is undefined > @@ -45,7 +49,9 @@ CONFIG_DRIVER_NET_SMC911X=y > # CONFIG_LED_GPIO_RGB is undefined > # CONFIG_MACH_RPI2 is undefined > # CONFIG_MACH_RPI3 is undefined > +# CONFIG_MACH_RPI4 is undefined > # CONFIG_MACH_RPI is undefined > +# CONFIG_MACH_RPI_AARCH_32_64 is undefined > # CONFIG_MACH_RPI_CM3 is undefined > # CONFIG_MACH_RPI_COMMON is undefined > CONFIG_MACH_VEXPRESS=y > @@ -64,4 +70,5 @@ CONFIG_PROMPT="vexpress: " > # CONFIG_REGULATOR_FIXED is undefined > CONFIG_SERIAL_AMBA_PL011=y > CONFIG_SRAM=y > +# CONFIG_USE_COMPRESSED_DTB is undefined > # CONFIG_WATCHDOG_BCM2835 is undefined > diff --git a/configs/platform-v7a_noneon/barebox.config b/configs/platform-v7a_noneon/barebox.config > index 8b3a2f4..bbedcdb 100644 > --- a/configs/platform-v7a_noneon/barebox.config > +++ b/configs/platform-v7a_noneon/barebox.config > @@ -1,40 +1,38 @@ > # > # Automatically generated file; DO NOT EDIT. > -# Barebox/arm 2022.05.0 Configuration > +# Barebox/arm 2023.07.1-20230706-1 Configuration > # > CONFIG_ARM=y > CONFIG_ARM_LINUX=y > +CONFIG_ARM_USE_COMPRESSED_DTB=y > CONFIG_TEXT_BASE=0x0 > > # > # System Type > # > +CONFIG_ARCH_MULTIARCH=y > # CONFIG_ARCH_AT91 is not set > -CONFIG_ARCH_BCM283X=y > # CONFIG_ARCH_CLPS711X is not set > # CONFIG_ARCH_DAVINCI is not set > # CONFIG_ARCH_DIGIC is not set > # CONFIG_ARCH_EP93XX is not set > -# CONFIG_ARCH_IMX is not set > # CONFIG_ARCH_LAYERSCAPE is not set > # CONFIG_ARCH_MVEBU is not set > # CONFIG_ARCH_MXS is not set > # CONFIG_ARCH_NOMADIK is not set > -# CONFIG_ARCH_OMAP is not set > +# CONFIG_ARCH_OMAP_SINGLE is not set > # CONFIG_ARCH_PXA is not set > -# CONFIG_ARCH_ROCKCHIP is not set > # CONFIG_ARCH_SOCFPGA is not set > -# CONFIG_ARCH_S3C24xx is not set > -# CONFIG_ARCH_S5PCxx is not set > -# CONFIG_ARCH_S3C64xx is not set > -# CONFIG_ARCH_STM32MP is not set > -# CONFIG_ARCH_VERSATILE is not set > -# CONFIG_ARCH_VEXPRESS is not set > # CONFIG_ARCH_TEGRA is not set > # CONFIG_ARCH_UEMD is not set > # CONFIG_ARCH_ZYNQ is not set > -# CONFIG_ARCH_ZYNQMP is not set > -# CONFIG_ARCH_ARM64_VIRT is not set > +CONFIG_ARCH_BCM283X=y > +# CONFIG_ARCH_IMX is not set > +# CONFIG_ARCH_OMAP_MULTI is not set > +# CONFIG_ARCH_ROCKCHIP is not set > +# CONFIG_ARCH_STM32MP is not set > +# CONFIG_ARCH_VERSATILE is not set > +# CONFIG_ARCH_VEXPRESS is not set > > # > # Processor Type > @@ -49,6 +47,7 @@ CONFIG_CPU_32v7=y > # CONFIG_BOOT_ENDIANNESS_SWITCH is not set > CONFIG_ARCH_TEXT_BASE=0x0 > CONFIG_MACH_RPI_COMMON=y > +CONFIG_MACH_RPI_AARCH_32_64=y > > # > # select Broadcom BCM283X boards to be built > @@ -57,15 +56,18 @@ CONFIG_MACH_RPI_COMMON=y > # CONFIG_MACH_RPI2 is not set > CONFIG_MACH_RPI3=y > # CONFIG_MACH_RPI_CM3 is not set > +# CONFIG_MACH_RPI4 is not set > # end of select Broadcom BCM283X boards to be built > > -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff > CONFIG_BOARD_ARM_GENERIC_DT=y > CONFIG_AEABI=y > # CONFIG_THUMB2_BAREBOX is not set > # CONFIG_ARM_BOARD_APPEND_ATAG is not set > # end of System Type > > +# CONFIG_64BIT is not set > +CONFIG_32BIT=y > + > # > # ARM specific settings > # > @@ -84,7 +86,7 @@ CONFIG_HAS_KALLSYMS=y > CONFIG_HAS_MODULES=y > CONFIG_HAS_CACHE=y > CONFIG_HAS_DMA=y > -CONFIG_HAS_ARCH_SJLJ=y > +CONFIG_ARCH_HAS_SJLJ=y > CONFIG_GENERIC_GPIO=y > CONFIG_BLOCK=y > CONFIG_BLOCK_WRITE=y > @@ -105,6 +107,7 @@ CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_BANNER=y > CONFIG_MEMINFO=y > +CONFIG_MEMTEST=y > CONFIG_ENVIRONMENT_VARIABLES=y > CONFIG_GLOBALVAR=y > CONFIG_NVVAR=y > @@ -117,6 +120,7 @@ CONFIG_HAVE_PBL_MULTI_IMAGES=y > CONFIG_HAVE_IMAGE_COMPRESSION=y > CONFIG_PBL_IMAGE=y > CONFIG_PBL_MULTI_IMAGES=y > +CONFIG_USE_COMPRESSED_DTB=y > CONFIG_PBL_RELOCATABLE=y > CONFIG_BOARD_GENERIC_DT=y > CONFIG_IMAGE_COMPRESSION=y > @@ -126,7 +130,8 @@ CONFIG_IMAGE_COMPRESSION_LZO=y > # CONFIG_IMAGE_COMPRESSION_XZKERN is not set > # CONFIG_IMAGE_COMPRESSION_NONE is not set > CONFIG_MMU=y > -CONFIG_MMU_EARLY=y > +CONFIG_MMUINFO=y > +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff > CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff > CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff > CONFIG_STACK_SIZE=0x8000 > @@ -189,10 +194,6 @@ CONFIG_PARTITION_DISK_DOS=y > # CONFIG_PARTITION_DISK_EFI is not set > CONFIG_ENV_HANDLING=y > CONFIG_DEFAULT_ENVIRONMENT=y > -# CONFIG_DEFAULT_COMPRESSION_GZIP is not set > -# CONFIG_DEFAULT_COMPRESSION_BZIP2 is not set > -# CONFIG_DEFAULT_COMPRESSION_LZO is not set > -# CONFIG_DEFAULT_COMPRESSION_XZ is not set > CONFIG_DEFAULT_COMPRESSION_NONE=y > CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y > CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y > @@ -240,6 +241,7 @@ CONFIG_HAVE_ARCH_KASAN=y > CONFIG_CC_HAS_KASAN_GENERIC=y > # CONFIG_KASAN is not set > # CONFIG_COMPILE_TEST is not set > +# CONFIG_WERROR is not set > # end of Debugging > > # > @@ -261,6 +263,7 @@ CONFIG_COMPILE_HASH=y > # CONFIG_CMD_TUTORIAL is not set > CONFIG_CMD_ARM_CPUINFO=y > CONFIG_CMD_DEVINFO=y > +# CONFIG_CMD_DEVLOOKUP is not set > # CONFIG_CMD_DEVUNBIND is not set > CONFIG_CMD_DMESG=y > CONFIG_CMD_DRVINFO=y > @@ -331,6 +334,7 @@ CONFIG_CMD_DIRNAME=y > CONFIG_CMD_FILETYPE=y > CONFIG_CMD_LN=y > CONFIG_CMD_LS=y > +# CONFIG_CMD_STAT is not set > CONFIG_CMD_MD5SUM=y > CONFIG_CMD_MKDIR=y > CONFIG_CMD_PWD=y > @@ -427,15 +431,18 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0 > CONFIG_CMD_BAREBOX_UPDATE=y > # CONFIG_CMD_BLOBGEN is not set > # CONFIG_CMD_FIRMWARELOAD is not set > +# CONFIG_CMD_OF_COMPATIBLE is not set > # CONFIG_CMD_OF_DIFF is not set > CONFIG_CMD_OF_DUMP=y > CONFIG_CMD_OF_NODE=y > CONFIG_CMD_OF_PROPERTY=y > # CONFIG_CMD_OF_DISPLAY_TIMINGS is not set > +# CONFIG_CMD_OF_FIXUP is not set > CONFIG_CMD_OF_FIXUP_STATUS=y > CONFIG_CMD_OF_OVERLAY=y > CONFIG_CMD_OFTREE=y > CONFIG_CMD_TIME=y > +# CONFIG_CMD_UPTIME is not set > CONFIG_CMD_STATE=y > # CONFIG_CMD_DHRYSTONE is not set > # CONFIG_CMD_SPD_DECODE is not set > @@ -483,8 +490,9 @@ CONFIG_PHYLIB=y > # > # Network drivers > # > -# CONFIG_DRIVER_NET_DESIGNWARE is not set > -# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set > +# CONFIG_DRIVER_NET_ARC_EMAC is not set > +# CONFIG_DRIVER_NET_BCMGENET is not set > +# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set > # CONFIG_DRIVER_NET_ENC28J60 is not set > # CONFIG_DRIVER_NET_FSL_FMAN is not set > # CONFIG_DRIVER_NET_KS8851_MLL is not set > @@ -508,6 +516,7 @@ CONFIG_PHYLIB=y > # CONFIG_LXT_PHY is not set > # CONFIG_MARVELL_PHY is not set > # CONFIG_MICREL_PHY is not set > +# CONFIG_MOTORCOMM_PHY is not set > # CONFIG_NATIONAL_PHY is not set > # CONFIG_REALTEK_PHY is not set > # CONFIG_SMSC_PHY is not set > @@ -544,6 +553,7 @@ CONFIG_I2C_ALGOBIT=y > # I2C Hardware Bus support > # > CONFIG_I2C_GPIO=y > +# CONFIG_I2C_BCM283X is not set > # CONFIG_I2C_DESIGNWARE is not set > # CONFIG_I2C_MV64XXX is not set > # end of I2C Hardware Bus support > @@ -600,6 +610,8 @@ CONFIG_USB_STORAGE=y > # USB Miscellaneous drivers > # > # CONFIG_USB_HUB_USB251XB is not set > +# CONFIG_USB_ONBOARD_HUB is not set > +# CONFIG_TYPEC_TUSB320 is not set > CONFIG_USB_GADGET=y > CONFIG_USB_GADGET_AUTOSTART=y > > @@ -638,6 +650,7 @@ CONFIG_HAVE_CLK=y > CONFIG_CLKDEV_LOOKUP=y > CONFIG_COMMON_CLK=y > CONFIG_COMMON_CLK_OF_PROVIDER=y > +CONFIG_COMMON_CLK_GPIO=y > > # > # Clocksource > @@ -665,6 +678,9 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y > # CONFIG_MFD_STPMIC1 is not set > # CONFIG_MFD_RN568PMIC is not set > # CONFIG_MFD_ATMEL_FLEXCOM is not set > +# CONFIG_MFD_RK808 is not set > +# CONFIG_MFD_AXP20X_I2C is not set > +# CONFIG_MFD_ROHM_BD718XX is not set > # end of Multifunction device drivers > > # > @@ -730,6 +746,7 @@ CONFIG_GPIOLIB=y > # CONFIG_GPIO_DESIGNWARE is not set > # CONFIG_GPIO_SX150X is not set > # CONFIG_GPIO_SIFIVE is not set > +# CONFIG_GPIO_LATCH is not set > # end of GPIO > > # CONFIG_W1 is not set > @@ -767,6 +784,7 @@ CONFIG_REGULATOR_BCM283X=y > # > # CONFIG_FIRMWARE_ALTERA_SERIAL is not set > # CONFIG_ARM_SCMI_PROTOCOL is not set > +# CONFIG_QEMU_FW_CFG is not set > # end of Firmware Drivers > > # > @@ -776,7 +794,11 @@ CONFIG_REGULATOR_BCM283X=y > # end of FPGA Configuration Support > > # CONFIG_GENERIC_PHY is not set > -# CONFIG_CRYPTO_HW is not set > + > +# > +# Hardware crypto devices > +# > +# end of Hardware crypto devices > > # > # Memory controller drivers > @@ -829,6 +851,7 @@ CONFIG_FS_EXT4=y > CONFIG_FS_RAMFS=y > CONFIG_FS_DEVFS=y > CONFIG_FS_TFTP=y > +CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128 > CONFIG_FS_NFS=y > CONFIG_FS_FAT=y > CONFIG_FS_FAT_WRITE=y > @@ -893,11 +916,11 @@ CONFIG_LIBFDT=y > # > # end of Library gui routines > > -# CONFIG_BAREBOX_LOGO is not set > -# CONFIG_NLS is not set > +CONFIG_NLS=y > # CONFIG_BLOBGEN is not set > CONFIG_ARCH_HAS_STACK_DUMP=y > CONFIG_ARCH_HAS_DATA_ABORT_MASK=y > +CONFIG_ARCH_HAS_ZERO_PAGE=y > # end of Library routines > > # > @@ -924,6 +947,7 @@ CONFIG_DIGEST_SHA1_GENERIC=y > # Firmware files > # > CONFIG_EXTRA_FIRMWARE_DIR="firmware" > +CONFIG_MISSING_FIRMWARE_ERROR=y > # end of Firmware files > > # > diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch > new file mode 100644 > index 0000000..1afe828 > --- /dev/null > +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch > @@ -0,0 +1,32 @@ > +From: Oleksij Rempel > +Date: Thu, 6 Jul 2023 09:04:40 +0200 > +Subject: [PATCH] ARM: at91: enable ddramc for sama5d3 and sama5d4 > + > +ddramc has already support for sama5d3 and sama5d4, so enable it > +officially. > + > +Signed-off-by: Oleksij Rempel > +--- > + arch/arm/mach-at91/Kconfig | 2 ++ > + 1 file changed, 2 insertions(+) > + > +diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > +index b803a1185d20..349586b68339 100644 > +--- a/arch/arm/mach-at91/Kconfig > ++++ b/arch/arm/mach-at91/Kconfig > +@@ -104,6 +104,7 @@ config SOC_SAMA5D3 > + select HAVE_AT91_UTMI > + select PINCTRL_AT91 > + select HAS_MACB > ++ select HAVE_AT91_DDRAMC > + > + config SOC_SAMA5D4 > + bool > +@@ -116,6 +117,7 @@ config SOC_SAMA5D4 > + select HAVE_AT91_UTMI > + select PINCTRL_AT91 > + select HAS_MACB > ++ select HAVE_AT91_DDRAMC > + > + config SOC_SAM9X60 > + bool > diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch > new file mode 100644 > index 0000000..7aeec24 > --- /dev/null > +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch > @@ -0,0 +1,219 @@ > +From: Oleksij Rempel > +Date: Tue, 4 Jul 2023 06:35:09 +0200 > +Subject: [PATCH] ARM: at91: add support for SAMA5D3 - Ethernet Development > + System Board > + > +Microchip Technology SAMA5D3 Ethernet Development System (EDS) Board > +(DM320114) is an MPU-based platform for evaluating Ethernet Switch and > +PHY products. Compatible Ethernet Switch and PHY Evaluation Boards > +connect to the SAMA5D3 EDS Board via either an RGMII or RMII connector. > +The Microchip Technology SAMA5D3 EDS Board is not intended for > +stand-alone use and has no Ethernet capabilities when no daughter board > +or an USB Ethernet adapter is connected. > + > +For more information see: > +https://www.microchip.com/en-us/development-tool/DM320114 > + > +Signed-off-by: Oleksij Rempel > +--- > + Documentation/boards/at91.rst | 2 + > + arch/arm/boards/Makefile | 1 + > + arch/arm/boards/microchip-sama5d3-eds/Makefile | 3 ++ > + arch/arm/boards/microchip-sama5d3-eds/lowlevel.c | 62 ++++++++++++++++++++++++ > + arch/arm/configs/at91_multi_defconfig | 1 + > + arch/arm/dts/Makefile | 1 + > + arch/arm/dts/at91-microchip-sama5d3-eds.dts | 14 ++++++ > + arch/arm/mach-at91/Kconfig | 10 ++++ > + images/Makefile.at91 | 9 ++++ > + 9 files changed, 103 insertions(+) > + create mode 100644 arch/arm/boards/microchip-sama5d3-eds/Makefile > + create mode 100644 arch/arm/boards/microchip-sama5d3-eds/lowlevel.c > + create mode 100644 arch/arm/dts/at91-microchip-sama5d3-eds.dts > + > +diff --git a/Documentation/boards/at91.rst b/Documentation/boards/at91.rst > +index f502979df6eb..961ef58d84ac 100644 > +--- a/Documentation/boards/at91.rst > ++++ b/Documentation/boards/at91.rst > +@@ -35,6 +35,8 @@ The resulting images will be placed under ``images/``: > + barebox-at91sam9263ek.img > + barebox-microchip-ksz9477-evb.img > + barebox-microchip-ksz9477-evb-xload-mmc.img > ++ barebox-microchip-sama5d3-eds.img > ++ barebox-microchip-sama5d3-eds-xload-mmc.img > + barebox-sama5d3-xplained.img > + barebox-sama5d3-xplained-xload-mmc.img > + barebox-sama5d27-som1-ek.img > +diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile > +index 2877debad535..382e649fce62 100644 > +--- a/arch/arm/boards/Makefile > ++++ b/arch/arm/boards/Makefile > +@@ -121,6 +121,7 @@ obj-$(CONFIG_MACH_SAMA5D27_SOM1) += sama5d27-som1/ > + obj-$(CONFIG_MACH_SAMA5D3XEK) += sama5d3xek/ > + obj-$(CONFIG_MACH_SAMA5D3_XPLAINED) += sama5d3_xplained/ > + obj-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += microchip-ksz9477-evb/ > ++obj-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += microchip-sama5d3-eds/ > + obj-$(CONFIG_MACH_SAMA5D4_XPLAINED) += sama5d4_xplained/ > + obj-$(CONFIG_MACH_SAMA5D4_WIFX) += sama5d4_wifx/ > + obj-$(CONFIG_MACH_SAMA5D4EK) += sama5d4ek/ > +diff --git a/arch/arm/boards/microchip-sama5d3-eds/Makefile b/arch/arm/boards/microchip-sama5d3-eds/Makefile > +new file mode 100644 > +index 000000000000..458f5209008d > +--- /dev/null > ++++ b/arch/arm/boards/microchip-sama5d3-eds/Makefile > +@@ -0,0 +1,3 @@ > ++# SPDX-License-Identifier: GPL-2.0-only > ++ > ++lwl-y += lowlevel.o > +diff --git a/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c > +new file mode 100644 > +index 000000000000..79346a9b6ac1 > +--- /dev/null > ++++ b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c > +@@ -0,0 +1,62 @@ > ++// SPDX-License-Identifier: GPL-2.0-only AND BSD-1-Clause > ++/* > ++ * Copyright (C) 2014, Atmel Corporation > ++ * Copyright (C) 2018 Ahmad Fatoum, Pengutronix > ++ */ > ++ > ++#include > ++#include > ++ > ++#include > ++#include > ++#include > ++#include > ++#include > ++#include > ++#include > ++ > ++/* PCK = 528MHz, MCK = 132MHz */ > ++#define MASTER_CLOCK 132000000 > ++ > ++static void dbgu_init(void) > ++{ > ++ void __iomem *pio = IOMEM(SAMA5D3_BASE_PIOB); > ++ > ++ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_PIOB); > ++ > ++ at91_mux_pio3_pin(pio, pin_to_mask(AT91_PIN_PB31), AT91_MUX_PERIPH_A, 0); > ++ > ++ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_DBGU); > ++ at91_dbgu_setup_ll(IOMEM(AT91_BASE_DBGU1), MASTER_CLOCK, 115200); > ++ > ++ putc_ll('>'); > ++} > ++ > ++SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds_xload_mmc, r4) > ++{ > ++ sama5d3_lowlevel_init(); > ++ > ++ relocate_to_current_adr(); > ++ setup_c(); > ++ > ++ sama5d3_udelay_init(MASTER_CLOCK); > ++ sama5d3_xplained_ddrconf(); > ++ if (IS_ENABLED(CONFIG_DEBUG_LL)) > ++ dbgu_init(); > ++ > ++ sama5d3_atmci_start_image(0, MASTER_CLOCK, 0); > ++} > ++ > ++extern char __dtb_z_at91_microchip_sama5d3_eds_start[]; > ++ > ++SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds, r4) > ++{ > ++ void *fdt; > ++ > ++ if (IS_ENABLED(CONFIG_DEBUG_LL)) > ++ dbgu_init(); > ++ > ++ fdt = __dtb_z_at91_microchip_sama5d3_eds_start + get_runtime_offset(); > ++ > ++ sama5d3_barebox_entry(r4, fdt); > ++} > +diff --git a/arch/arm/configs/at91_multi_defconfig b/arch/arm/configs/at91_multi_defconfig > +index c93c2f578609..de47af3bd0a6 100644 > +--- a/arch/arm/configs/at91_multi_defconfig > ++++ b/arch/arm/configs/at91_multi_defconfig > +@@ -4,6 +4,7 @@ CONFIG_MACH_SKOV_ARM9CPU=y > + CONFIG_MACH_AT91SAM9263EK=y > + CONFIG_MACH_AT91SAM9X5EK=y > + CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y > ++CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y > + CONFIG_MACH_SAMA5D3_XPLAINED=y > + CONFIG_MACH_SAMA5D27_SOM1=y > + CONFIG_MACH_SAMA5D27_GIANTBOARD=y > +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > +index 98f4c4e0194b..eb9e0e062adf 100644 > +--- a/arch/arm/dts/Makefile > ++++ b/arch/arm/dts/Makefile > +@@ -193,6 +193,7 @@ lwl-$(CONFIG_MACH_AC_SXB) += ac-sxb.dtb.o > + lwl-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o > + lwl-$(CONFIG_MACH_SAMA5D3_XPLAINED) += at91-sama5d3_xplained.dtb.o > + lwl-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o > ++lwl-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += at91-microchip-sama5d3-eds.dtb.o > + lwl-$(CONFIG_MACH_SAMA5D27_SOM1) += at91-sama5d27_som1_ek.dtb.o > + lwl-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += at91-sama5d27_giantboard.dtb.o > + lwl-$(CONFIG_MACH_SAMA5D4_WIFX) += at91-sama5d4_wifx_l1.dtb.o > +diff --git a/arch/arm/dts/at91-microchip-sama5d3-eds.dts b/arch/arm/dts/at91-microchip-sama5d3-eds.dts > +new file mode 100644 > +index 000000000000..ad75fc882c63 > +--- /dev/null > ++++ b/arch/arm/dts/at91-microchip-sama5d3-eds.dts > +@@ -0,0 +1,14 @@ > ++/* SPDX-License-Identifier: GPL-2.0 */ > ++/dts-v1/; > ++#include > ++#include "sama5d3.dtsi" > ++ > ++/ { > ++ chosen { > ++ environment { > ++ compatible = "barebox,environment"; > ++ device-path = &mmc0, "partname:0"; > ++ file-path = "barebox.env"; > ++ }; > ++ }; > ++}; > +diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > +index 349586b68339..d2499747252d 100644 > +--- a/arch/arm/mach-at91/Kconfig > ++++ b/arch/arm/mach-at91/Kconfig > +@@ -606,6 +606,16 @@ config MACH_MICROCHIP_KSZ9477_EVB > + help > + Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit. > + > ++config MACH_MICROCHIP_SAMA5D3_EDS > ++ bool "Microchip SAMA5D3 Ethernet Development System" > ++ select SOC_SAMA5D3 > ++ select OFDEVICE > ++ select MCI_ATMEL_PBL > ++ select COMMON_CLK_OF_PROVIDER > ++ help > ++ Select this if you are using Microchip's SAMA5D3 Ethernet Development > ++ System. > ++ > + config MACH_SAMA5D3_XPLAINED > + bool "Atmel SAMA5D3_XPLAINED Evaluation Kit" > + select SOC_SAMA5D3 > +diff --git a/images/Makefile.at91 b/images/Makefile.at91 > +index 19a81e2e9a3c..36f725940639 100644 > +--- a/images/Makefile.at91 > ++++ b/images/Makefile.at91 > +@@ -20,6 +20,15 @@ MAX_PBL_IMAGE_SIZE_start_sama5d3_xplained_ung8071_xload_mmc = 0xffff > + FILE_barebox-microchip-ksz9477-evb-xload-mmc.img = start_sama5d3_xplained_ung8071_xload_mmc.pblb > + image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb-xload-mmc.img > + > ++pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds > ++FILE_barebox-microchip-sama5d3-eds.img = start_microchip_sama5d3_eds.pblb > ++image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds.img > ++ > ++pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds_xload_mmc > ++MAX_PBL_IMAGE_SIZE_start_microchip_sama5d3_eds_xload_mmc = 0xffff > ++FILE_barebox-microchip-sama5d3-eds-xload-mmc.img = start_microchip_sama5d3_eds_xload_mmc.pblb > ++image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds-xload-mmc.img > ++ > + pblb-$(CONFIG_MACH_SAMA5D3_XPLAINED) += start_sama5d3_xplained > + FILE_barebox-sama5d3-xplained.img = start_sama5d3_xplained.pblb > + image-$(CONFIG_MACH_SAMA5D3_XPLAINED) += barebox-sama5d3-xplained.img > diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch > new file mode 100644 > index 0000000..519ea4a > --- /dev/null > +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch > @@ -0,0 +1,23 @@ > +From: Oleksij Rempel > +Date: Thu, 6 Jul 2023 09:26:22 +0200 > +Subject: [PATCH] ARM: at91: microchip-ksz9477-evb: migrate to > + sama5d3_barebox_entry() > + > +We have sama5d3_barebox_entry(), so make use of it. > + > +Signed-off-by: Oleksij Rempel > +--- > + arch/arm/boards/microchip-ksz9477-evb/lowlevel.c | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c > +index bda6a94160a5..aa2161daeef0 100644 > +--- a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c > ++++ b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c > +@@ -58,5 +58,5 @@ SAMA5D3_ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r4) > + > + fdt = __dtb_z_at91_microchip_ksz9477_evb_start + get_runtime_offset(); > + > +- barebox_arm_entry(SAMA5_DDRCS, SZ_256M, fdt); > ++ sama5d3_barebox_entry(r4, fdt); > + } > diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch > new file mode 100644 > index 0000000..d6e6193 > --- /dev/null > +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch > @@ -0,0 +1,22 @@ > +From: Oleksij Rempel > +Date: Thu, 6 Jul 2023 11:03:50 +0200 > +Subject: [PATCH] Release > + 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1 > + > +--- > + Makefile | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/Makefile b/Makefile > +index 92b5c6779a52..323f757908bc 100644 > +--- a/Makefile > ++++ b/Makefile > +@@ -2,7 +2,7 @@ > + VERSION = 2023 > + PATCHLEVEL = 07 > + SUBLEVEL = 1 > +-EXTRAVERSION = > ++EXTRAVERSION =-20230706-1 > + NAME = None > + > + # *DOCUMENTATION* > diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series > new file mode 100644 > index 0000000..bdd8894 > --- /dev/null > +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series > @@ -0,0 +1,13 @@ > +# umpf-base: v2023.07.1 > +# umpf-name: 2023.07.0/customers/pengutronix/distrokit-sama5d3 > +# umpf-version: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1 > +# umpf-topic: v2023.07.0/topic/microchip-sama5d3-ether-dev-sys > +# umpf-hashinfo: 8a1d1b8e7204ee57b743ae7f1325d5729104425e > +# umpf-topic-range: 0186c17838e655dbf6a3bcd01fa74821d5e67ae6..b2883ce6100ca0f8259a1726bf53387e6da04a99 > +0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch > +0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch > +0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch > +# umpf-release: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1 > +# umpf-topic-range: b2883ce6100ca0f8259a1726bf53387e6da04a99..eaaffd9164ab19a152d00c6d5f8f91cd07e5ec48 > +0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch > +# umpf-end > diff --git a/configs/platform-v7a_noneon/platformconfig b/configs/platform-v7a_noneon/platformconfig > index 784f35d..160c422 100644 > --- a/configs/platform-v7a_noneon/platformconfig > +++ b/configs/platform-v7a_noneon/platformconfig > @@ -180,8 +180,8 @@ PTXCONF_CONSOLE_SPEED="115200" > # PTXCONF_AT91BOOTSTRAP2 is not set > PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm" > PTXCONF_BAREBOX_COMMON=y > -PTXCONF_BAREBOX_COMMON_VERSION="2022.05.0" > -PTXCONF_BAREBOX_COMMON_MD5="2bf7e136b3bfb59179f154ee096ef716" > +PTXCONF_BAREBOX_COMMON_VERSION="2023.07.1" > +PTXCONF_BAREBOX_COMMON_MD5="0b7ea966cd01266a93a4ccfa7d68bce0" > PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y > PTXCONF_BAREBOX_AT91=y > PTXCONF_BAREBOX_VEXPRESS=y -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |