From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Fri, 07 Jul 2023 13:08:35 +0200 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1qHjKH-001Vat-4N for lore@lore.pengutronix.de; Fri, 07 Jul 2023 13:08:35 +0200 Received: from localhost ([127.0.0.1] helo=metis.ext.pengutronix.de) by metis.ext.pengutronix.de with esmtp (Exim 4.92) (envelope-from ) id 1qHjK6-0004kA-H9; Fri, 07 Jul 2023 13:08:26 +0200 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1qHjK0-0004fp-Vs; Fri, 07 Jul 2023 13:08:21 +0200 Received: from [2a0a:edc0:0:1101:1d::ac] (helo=dude04.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtp (Exim 4.94.2) (envelope-from ) id 1qHjK0-00CiWL-AH; Fri, 07 Jul 2023 13:08:20 +0200 Received: from ore by dude04.red.stw.pengutronix.de with local (Exim 4.94.2) (envelope-from ) id 1qHjJz-00EjLK-8Z; Fri, 07 Jul 2023 13:08:19 +0200 From: Oleksij Rempel To: distrokit@pengutronix.de Date: Fri, 7 Jul 2023 13:08:13 +0200 Message-Id: <20230707110818.3510860-3-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230707110818.3510860-1-o.rempel@pengutronix.de> References: <20230707110818.3510860-1-o.rempel@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Subject: [DistroKit] [PATCH v2 2/7] v7a_noneon: use upstreamed devicetree the KSZ9477 EVB X-BeenThere: distrokit@pengutronix.de X-Mailman-Version: 2.1.29 Precedence: list List-Id: DistroKit Mailinglist List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Oleksij Rempel , Ahmad Fatoum Sender: "DistroKit" X-SA-Exim-Connect-IP: 127.0.0.1 X-SA-Exim-Mail-From: distrokit-bounces@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false KSZ9477 EVB is already mainline and there are some naming differences. So, drop downstream dts and use the mainline version. Signed-off-by: Oleksij Rempel Reviewed-by: Ahmad Fatoum --- .../dts/at91-microchip-ksz9477-evb.dts | 193 ------------------ configs/platform-v7a_noneon/platformconfig | 2 +- .../loader/entries/sama5d3-ksz9477-evb.conf | 2 +- 3 files changed, 2 insertions(+), 195 deletions(-) delete mode 100644 configs/platform-v7a_noneon/dts/at91-microchip-ksz9477-evb.dts diff --git a/configs/platform-v7a_noneon/dts/at91-microchip-ksz9477-evb.dts b/configs/platform-v7a_noneon/dts/at91-microchip-ksz9477-evb.dts deleted file mode 100644 index df77df5..0000000 --- a/configs/platform-v7a_noneon/dts/at91-microchip-ksz9477-evb.dts +++ /dev/null @@ -1,193 +0,0 @@ -/* - * at91-sama5d3_xplained_ung8071.dts - Device Tree file for the EVB-KSZ9477 board - * - * Copyright (C) 2014 Atmel, - * 2014 Nicolas Ferre - * 2018 Ahmad Fatoum - * - * Licensed under GPLv2 or later. - */ -/dts-v1/; -#include "sama5d36.dtsi" - -/ { - model = "EVB-KSZ9477"; - compatible = "atmel,sama5d3-ksz9477-evb", "atmel,sama5d3", "atmel,sama5"; - - chosen { - stdout-path = &dbgu; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; -}; - -&mmc0 { - pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <8>; - /* cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; */ - broken-cd; - }; -}; - -&spi0 { - cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>, - <&pioD 16 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&pinctrl_i2c0_pu>; - status = "okay"; -}; - -&macb0 { - phy-mode = "rgmii"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&spi1 { - pinctrl-0 = <&pinctrl_spi_ksz>; - cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>; - status = "okay"; - - switch@0 { - compatible = "microchip,ksz9477", "microchip,ksz9893"; - reg = <0>; - - /* Bus clock is 132 MHz. */ - spi-max-frequency = <1000000>; - spi-cpha; - spi-cpol; - /* reset-gpios = <&pioC 31 GPIO_ACTIVE_LOW>; */ - /* IRQ gpios = <&pioB 28 GPIO_ACTIVE_LOW>; */ - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@4 { - reg = <4>; - label = "lan5"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <&macb0>; - phy-mode = "rgmii-txid"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -&dbgu { - status = "okay"; -}; - -&ebi { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; -}; - -&nand_controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - }; -}; - -&usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ - status = "okay"; -}; - -&pinctrl { - board { - pinctrl_i2c0_pu: i2c0_pu { - atmel,pins = - , - ; - }; - - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - ; - }; - - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - ; /* PE9, conflicts with A9 */ - }; - - pinctrl_spi_ksz: spi-ksz { - atmel,pins = - < - AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC22 periph A SPI1_MISO pin */ - AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ - AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC24 periph A SPI1_SPCK pin */ - - /* SPI CS */ - AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE - /* switch IRQ */ - AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH - /* switch PME_N, SoC IN */ - AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP - /* switch RST */ - AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH - >; - }; - }; -}; diff --git a/configs/platform-v7a_noneon/platformconfig b/configs/platform-v7a_noneon/platformconfig index 160c422..3ff91ce 100644 --- a/configs/platform-v7a_noneon/platformconfig +++ b/configs/platform-v7a_noneon/platformconfig @@ -135,7 +135,7 @@ PTXCONF_KERNEL_IMAGE_Z=y PTXCONF_KERNEL_IMAGE="zImage" PTXCONF_KERNEL_DTB=y PTXCONF_KERNEL_DTS_PATH="${PTXDIST_PLATFORMCONFIGDIR}/dts:${KERNEL_DIR}/arch/${GENERIC_KERNEL_ARCH}/boot/dts" -PTXCONF_KERNEL_DTS="at91-microchip-ksz9477-evb.dts vexpress-v2p-ca9.dts" +PTXCONF_KERNEL_DTS="at91-sama5d3_ksz9477_evb.dts vexpress-v2p-ca9.dts" # PTXCONF_KERNEL_DTBO is not set # PTXCONF_KERNEL_CODE_SIGNING is not set # PTXCONF_KERNEL_ZSTD is not set diff --git a/configs/platform-v7a_noneon/projectroot/loader/entries/sama5d3-ksz9477-evb.conf b/configs/platform-v7a_noneon/projectroot/loader/entries/sama5d3-ksz9477-evb.conf index bdd9a4b..6ce491d 100644 --- a/configs/platform-v7a_noneon/projectroot/loader/entries/sama5d3-ksz9477-evb.conf +++ b/configs/platform-v7a_noneon/projectroot/loader/entries/sama5d3-ksz9477-evb.conf @@ -3,4 +3,4 @@ version 5.8 options rootwait rw linux-appendroot true linux /boot/zImage -devicetree /boot/at91-microchip-ksz9477-evb.dtb +devicetree /boot/at91-sama5d3_ksz9477_evb.dtb -- 2.39.2