From: Robert Schwebel <r.schwebel@pengutronix.de>
To: Roland Hieber <rhi@pengutronix.de>
Cc: distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH 2/2] rpi: rename platform to rpi1
Date: Wed, 23 Nov 2022 21:44:34 +0100 [thread overview]
Message-ID: <20221123204434.GJ24167@pengutronix.de> (raw)
In-Reply-To: <20221115114234.3452619-2-rhi@pengutronix.de>
On Tue, Nov 15, 2022 at 12:42:34PM +0100, Roland Hieber wrote:
> Make it clear that this platform is really only used for the legacy
> ARMv6-based RPi 1 boards, so that there is no confusion when trying to
> use it for RPi 2 or later, even for people who don't read the
> documentation.
>
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
> .../barebox-defaultenv/boot/net | 0
> .../barebox-defaultenv/boot/sd | 0
> .../barebox-defaultenv/nv/boot.default | 0
> .../barebox.config | 0
> .../config/images/boot-vfat.config | 0
> .../firmware/LICENCE.broadcom | 0
> .../firmware/bootcode.bin | Bin
> .../firmware/config.txt | 0
> .../firmware/fixup.dat | Bin
> .../firmware/fixup_cd.dat | Bin
> .../firmware/fixup_db.dat | Bin
> .../firmware/fixup_x.dat | Bin
> .../firmware/start.elf | Bin
> .../firmware/start_cd.elf | Bin
> .../firmware/start_db.elf | Bin
> .../firmware/start_x.elf | Bin
> .../kernelconfig | 0
> .../0001-mci-bcm283x-depend-on-sdhci.patch | 0
> .../patches/barebox-2020.08.1/series | 0
> .../platformconfig | 2 +-
> .../platforms/image-boot-vfat.in | 0
> .../rules/image-boot-vfat.make | 0
> doc/hardware.rst | 20 +++++++++---------
> ...pi_raspi1.rst => hardware_rpi1_raspi1.rst} | 2 +-
> 24 files changed, 12 insertions(+), 12 deletions(-)
> rename configs/{platform-rpi => platform-rpi1}/barebox-defaultenv/boot/net (100%)
> rename configs/{platform-rpi => platform-rpi1}/barebox-defaultenv/boot/sd (100%)
> rename configs/{platform-rpi => platform-rpi1}/barebox-defaultenv/nv/boot.default (100%)
> rename configs/{platform-rpi => platform-rpi1}/barebox.config (100%)
> rename configs/{platform-rpi => platform-rpi1}/config/images/boot-vfat.config (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/LICENCE.broadcom (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/bootcode.bin (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/config.txt (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/fixup.dat (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/fixup_cd.dat (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/fixup_db.dat (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/fixup_x.dat (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/start.elf (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/start_cd.elf (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/start_db.elf (100%)
> rename configs/{platform-rpi => platform-rpi1}/firmware/start_x.elf (100%)
> rename configs/{platform-rpi => platform-rpi1}/kernelconfig (100%)
> rename configs/{platform-rpi => platform-rpi1}/patches/barebox-2020.08.1/0001-mci-bcm283x-depend-on-sdhci.patch (100%)
> rename configs/{platform-rpi => platform-rpi1}/patches/barebox-2020.08.1/series (100%)
> rename configs/{platform-rpi => platform-rpi1}/platformconfig (99%)
> rename configs/{platform-rpi => platform-rpi1}/platforms/image-boot-vfat.in (100%)
> rename configs/{platform-rpi => platform-rpi1}/rules/image-boot-vfat.make (100%)
> rename doc/{hardware_rpi_raspi1.rst => hardware_rpi1_raspi1.rst} (76%)
Applied to next.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
next prev parent reply other threads:[~2022-11-23 20:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-15 11:42 [DistroKit] [PATCH 1/2] ptxdist: migrate to 2022.11.0 Roland Hieber
2022-11-15 11:42 ` [DistroKit] [PATCH 2/2] rpi: rename platform to rpi1 Roland Hieber
2022-11-23 20:44 ` Robert Schwebel [this message]
2022-11-15 11:43 ` [DistroKit] [PATCH 1/2] ptxdist: migrate to 2022.11.0 Roland Hieber
2022-11-23 20:43 ` Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221123204434.GJ24167@pengutronix.de \
--to=r.schwebel@pengutronix.de \
--cc=distrokit@pengutronix.de \
--cc=rhi@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox