From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: From: Ahmad Fatoum Date: Mon, 12 Oct 2020 21:36:04 +0200 Message-Id: <20201012193604.9394-7-a.fatoum@pengutronix.de> In-Reply-To: <20201012193604.9394-1-a.fatoum@pengutronix.de> References: <20201012193604.9394-1-a.fatoum@pengutronix.de> MIME-Version: 1.0 Subject: [DistroKit] [PATCH v2 7/7] doc: document the new SAMA5D2 boards List-Id: DistroKit Mailinglist List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: distrokit-bounces@pengutronix.de Sender: "DistroKit" To: distrokit@pengutronix.de Cc: Ahmad Fatoum , Roland Hieber Add some basic documentation for the two new boards added in the previous commits. Suggested-by: Roland Hieber Signed-off-by: Ahmad Fatoum --- v1 -> v2: new patch --- doc/hardware.rst | 1 + doc/hardware_v7a_sama5d2.rst | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+) create mode 100644 doc/hardware_v7a_sama5d2.rst diff --git a/doc/hardware.rst b/doc/hardware.rst index 703261842dde..117fb17cdee5 100644 --- a/doc/hardware.rst +++ b/doc/hardware.rst @@ -49,6 +49,7 @@ It supports the following hardware: hardware_v7a_raspi2 hardware_v7a_raspi3 hardware_v7a_udoo_neo + hardware_v7a_sama5d2 If you want to get DistroKit running on your ARMv7-A board which is not listed above, here is a short overview of the generic way: diff --git a/doc/hardware_v7a_sama5d2.rst b/doc/hardware_v7a_sama5d2.rst new file mode 100644 index 000000000000..ae39cdf3b3ed --- /dev/null +++ b/doc/hardware_v7a_sama5d2.rst @@ -0,0 +1,23 @@ +SAMA5D2 boards +============== + +DistroKit supports two SAMA5D27 boards out of the box: + + * SAMA5D27-SOM1-EK + * Groboards Giant Board + +Boot Media +---------- + +DistroKit generates ``platform-v7a/images/sama5d27-*.hdimg``. +Use the respective image for your board and copy it onto your SD card. +The Giant board has only 1 microSD slot, the EK has additionally +1 normal SD-sized slot. Both can be used. + +Serial Console +-------------- + +The EK has an on-board USB-serial adapter interfaced to J10. This is the +default console and power supply. Default UART on the Giant board are the +Pins marked as Tx/Rx. The microUSB on the board can be used as power +supply, but it has no serial port there by default. -- 2.28.0 _______________________________________________ DistroKit mailing list DistroKit@pengutronix.de