From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: From: Ahmad Fatoum Date: Fri, 24 Apr 2020 19:17:24 +0200 Message-Id: <20200424171726.8330-5-a.fatoum@pengutronix.de> In-Reply-To: <20200424171726.8330-1-a.fatoum@pengutronix.de> References: <20200424171726.8330-1-a.fatoum@pengutronix.de> MIME-Version: 1.0 Subject: [DistroKit] [PATCH 5/7] v7a: stm32mp: add Linux Automation MC-1 device tree List-Id: DistroKit Mailinglist List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: distrokit-bounces@pengutronix.de Sender: "DistroKit" To: distrokit@pengutronix.de Cc: Ahmad Fatoum The device tree is based on the one in linux-stm32/stm32-next, which will probably be merged for Linux v5.8-rc1. Instead of waiting that long, we import it here with some stuff removed/changed, so it's usable without the prerequisite patches. We can drop them again, when we upgrade to v5.8-rc1. Signed-off-by: Ahmad Fatoum --- .../platform-v7a/dts/stm32mp157c-lxa-mc1.dts | 362 ++++++++++++++++++ .../platform-v7a/dts/stm32mp15xx-osd32.dtsi | 229 +++++++++++ configs/platform-v7a/platformconfig | 4 +- 3 files changed, 593 insertions(+), 2 deletions(-) create mode 100644 configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts create mode 100644 configs/platform-v7a/dts/stm32mp15xx-osd32.dtsi diff --git a/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts b/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts new file mode 100644 index 000000000000..d65c82379a65 --- /dev/null +++ b/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts @@ -0,0 +1,362 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */ +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2020 Ahmad Fatoum, Pengutronix + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xx-osd32.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" + +#include +#include + +/ { + model = "Linux Automation MC-1 board"; + compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + serial0 = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 31 63 95 127 159 191 223 255>; + default-brightness-level = <7>; + power-supply = <®_5v2>; /* 3V3_BACKLIGHT */ + }; + + chosen { + stdout-path = &uart4; + }; + + led-act { + compatible = "gpio-leds"; + + led-green { + label = "mc1:green:act"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + led-rgb { + compatible = "pwm-leds"; + + led-red { + label = "mc1:red:rgb"; + pwms = <&leds_pwm 1 1000000 0>; + max-brightness = <255>; + active-low; + }; + + led-green { + label = "mc1:green:rgb"; + pwms = <&leds_pwm 2 1000000 0>; + max-brightness = <255>; + active-low; + }; + + led-blue { + label = "mc1:blue:rgb"; + pwms = <&leds_pwm 3 1000000 0>; + max-brightness = <255>; + active-low; + }; + }; + + panel: panel { + compatible = "edt,etm0700g0edh6", "simple-panel"; + backlight = <&backlight>; + enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + + port { + panel_input: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; + + reg_3v3: regulator_3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&v3v3>; + }; + + /* supplied by either debug board or PoE */ + reg_5v2: regulator_5v2 { + compatible = "regulator-fixed"; + regulator-name = "5V2"; + regulator-min-microvolt = <5200000>; + regulator-max-microvolt = <5200000>; + regulator-always-on; + }; +}; + +ðernet0 { + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_rgmii_mc1pins_b>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy>; + status = "okay"; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { /* KSZ9031RN */ + reg = <3>; + reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ + interrupt-parent = <&gpioa>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */ + rxc-skew-ps = <1860>; + txc-skew-ps = <1860>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + micrel,force-master; + }; + }; +}; + +&gpioz { + gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "", + "HWID4", "HWID5"; +}; + +&gpu { + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_mc1pins_b>; + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + interrupt-parent = <&gpiod>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */ + vcc-supply = <®_3v3>; + reg = <0x38>; + reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */ + touchscreen-size-x = <1792>; + touchscreen-size-y = <1024>; + wakeup-source; + }; +}; + +<dc { + pinctrl-names = "default"; + pinctrl-0 = <<dc_mc1pins_c>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; +}; + +&pmic { + regulators { + buck4-supply = <®_5v2>; /* VIN */ + ldo2-supply = <®_5v2>; /* PMIC_LDO25IN */ + ldo5-supply = <®_5v2>; /* PMIC_LDO25IN */ + boost-supply = <®_5v2>; /* PMIC_BSTIN */ + pwr_sw2-supply = <&bst_out>; /* PMIC_SWIN */ + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + bus-width = <4>; + cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; + disable-wp; + no-1-8-v; + st,neg-edge; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc1_b4_pins_a { + /* + * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to + * work, thus enable internal pull-ups. + */ + pins1 { + /delete-property/ bias-disable; + bias-pull-up; + }; + pins2 { + /delete-property/ bias-disable; + bias-pull-up; + }; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_mc1pins_b>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_mc1pins_b>; + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +&timers3 { + status = "okay"; + + backlight_pwm: pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_mc1pins_b>; + status = "okay"; + }; +}; + +&timers5 { + status = "okay"; + + leds_pwm: pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_mc1pins_b>; + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&pinctrl { + ethernet0_rgmii_mc1pins_b: mc1-rgmii-1 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = ; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + i2c5_mc1pins_b: mc1-i2c5-1 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + ltdc_mc1pins_c: mc1-ltdc-2 { + pins1 { + pinmux = , /* LTDC_R6 */ + , /* LTDC_B7 */ + , /* LTDC_R5 */ + , /* LTDC_G7 */ + , /* LTDC_B2 */ + , /* LTDC_B3 */ + , /* LTDC_G3 */ + , /* LTDC_B4 */ + , /* LTDC_DE */ + , /* LTDC_R7 */ + , /* LTDC_G5 */ + , /* LTDC_R2 */ + , /* LTDC_R3 */ + , /* LTDC_R4 */ + , /* LTDC_G2 */ + , /* LTDC_G4 */ + , /* LTDC_G6 */ + , /* LTDC_B5 */ + , /* LTDC_B6 */ + , /* LTDC_VSYNC */ + ; /* LTDC_HSYNC */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* LTDC_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + pwm3_mc1pins_b: mc1-pwm3-1 { + pins { + pinmux = ; /* TIM3_CH2 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_mc1pins_b: mc1-pwm5-1 { + pins { + pinmux = , /* TIM5_CH2 */ + , /* TIM5_CH3 */ + ; /* TIM5_CH4 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + sdmmc2_d47_mc1pins_b: mc1-sdmmc2-d47-1 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + +}; diff --git a/configs/platform-v7a/dts/stm32mp15xx-osd32.dtsi b/configs/platform-v7a/dts/stm32mp15xx-osd32.dtsi new file mode 100644 index 000000000000..cd0bbf08b5de --- /dev/null +++ b/configs/platform-v7a/dts/stm32mp15xx-osd32.dtsi @@ -0,0 +1,229 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */ +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2020 Ahmad Fatoum, Pengutronix + */ + +#include "stm32mp15-pinctrl.dtsi" + +#include + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + reg_sip_eeprom: regulator_eeprom { + compatible = "regulator-fixed"; + regulator-name = "sip_eeprom"; + regulator-always-on; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = ; + + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = ; + + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = ; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = ; + + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = ; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + }; + + pmic_watchdog: watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + sip_eeprom: eeprom@50 { + compatible = "atmel,24c32"; + vcc-supply = <®_sip_eeprom>; + reg = <0x50>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig index cdda0418da6f..41ab61a9b9bf 100644 --- a/configs/platform-v7a/platformconfig +++ b/configs/platform-v7a/platformconfig @@ -142,8 +142,8 @@ PTXCONF_KERNEL_CONFIG="kernelconfig" PTXCONF_KERNEL_EXTRA_MAKEVARS="" PTXCONF_DTC=y PTXCONF_DTC_INSTALL_OFTREE=y -PTXCONF_DTC_OFTREE_DTS_PATH="${KERNEL_DIR}/arch/${GENERIC_KERNEL_ARCH}/boot/dts" -PTXCONF_DTC_OFTREE_DTS="am335x-bone.dts am335x-boneblack.dts vexpress-v2p-ca9.dts bcm2836-rpi-2-b.dts imx6q-sabrelite.dts imx6sx-udoo-neo-full.dts imx6dl-riotboard.dts imx6q-nitrogen6x.dts imx6qp-nitrogen6_max.dts bcm2837-rpi-3-b.dts stm32mp157c-dk2.dts" +PTXCONF_DTC_OFTREE_DTS_PATH="${PTXDIST_PLATFORMCONFIGDIR}/dts:${KERNEL_DIR}/arch/${GENERIC_KERNEL_ARCH}/boot/dts" +PTXCONF_DTC_OFTREE_DTS="am335x-bone.dts am335x-boneblack.dts vexpress-v2p-ca9.dts bcm2836-rpi-2-b.dts imx6q-sabrelite.dts imx6sx-udoo-neo-full.dts imx6dl-riotboard.dts imx6q-nitrogen6x.dts imx6qp-nitrogen6_max.dts bcm2837-rpi-3-b.dts stm32mp157c-dk2.dts stm32mp157c-lxa-mc1.dts" PTXCONF_DTC_EXTRA_ARGS="" PTXCONF_HOST_DTC=y PTXCONF_HOST_DTC_VERSION="1.5.1" -- 2.26.1 _______________________________________________ DistroKit mailing list DistroKit@pengutronix.de