From: Alexander Dahl <ada@thorsis.com>
To: Roland Hieber <rhi@pengutronix.de>
Cc: distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH 3/6] v7a: at91bootstrap: version bump 4.0.6-rc1 -> 4.0.12
Date: Mon, 8 Dec 2025 10:22:13 +0100 [thread overview]
Message-ID: <20251208-vigorous-femur-ee5a3cc3dc6d@thorsis.com> (raw)
In-Reply-To: <20251205222320.2261758-3-rhi@pengutronix.de>
Hello Roland,
Am Fri, Dec 05, 2025 at 11:22:52PM +0100 schrieb Roland Hieber:
> The old version no longer builds with GCC 15 (probably due to -Wall, but
> the exact reason was not tested). Update to the current version, and run
> 'oldconfig' with default values on the config file.
Acked-by: Alexander Dahl <ada@thorsis.com>
Greets
Alex
>
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
> .../platform-v7a/at91bootstrap-wifx-l1.config | 26 ++++++++++++-------
> configs/platform-v7a/platformconfig | 4 +--
> 2 files changed, 18 insertions(+), 12 deletions(-)
>
> diff --git a/configs/platform-v7a/at91bootstrap-wifx-l1.config b/configs/platform-v7a/at91bootstrap-wifx-l1.config
> index 5a201e2d969f..960b77cff735 100644
> --- a/configs/platform-v7a/at91bootstrap-wifx-l1.config
> +++ b/configs/platform-v7a/at91bootstrap-wifx-l1.config
> @@ -5,6 +5,7 @@ CONFIG_HAVE_DOT_CONFIG=y
> CONFIG_LOAD_AND_JUMP=y
> # CONFIG_DIRECT_JUMP is not set
> # CONFIG_INIT_AND_STOP is not set
> +# CONFIG_LOAD_AND_STOP is not set
> CONFIG_LOAD_SW=y
> CONFIG_JUMP_TO_SW=y
> # CONFIG_SAM9X60 is not set
> @@ -13,6 +14,7 @@ CONFIG_JUMP_TO_SW=y
> # CONFIG_SAMA5D3X is not set
> CONFIG_SAMA5D4=y
> # CONFIG_SAMA7G5 is not set
> +# CONFIG_SAMA7D65 is not set
> CONFIG_DEVICENAME="sama5d4"
>
> #
> @@ -139,6 +141,7 @@ CONFIG_CPU_HAS_AES=y
> # CONFIG_CPU_HAS_FLEXCOM12 is not set
> # CONFIG_CPU_HAS_WDT2 is not set
> # CONFIG_CPU_HAS_DWDT is not set
> +# CONFIG_CPU_HAS_XDMAC is not set
>
> #
> # DRAM
> @@ -169,6 +172,7 @@ CONFIG_DBW_16=y
> # CONFIG_DDR_1_GBIT is not set
> CONFIG_DDR_2_GBIT=y
> # CONFIG_DDR_4_GBIT is not set
> +# CONFIG_DDR_6_GBIT is not set
> # CONFIG_DDR_8_GBIT is not set
> # CONFIG_CAS_2 is not set
> CONFIG_CAS_3=y
> @@ -223,12 +227,21 @@ CONFIG_FATFS=y
> CONFIG_ALLOW_BOOT_FROM_DATAFLASH_CS0=y
> CONFIG_BOOTSTRAP_MAXSIZE="65536"
> CONFIG_PROJECT="sdcard"
> +# CONFIG_LOAD_OPTEE is not set
> CONFIG_LOAD_UBOOT=y
> # CONFIG_LOAD_LINUX is not set
> # CONFIG_LOAD_ANDROID is not set
> # CONFIG_LOAD_1MB is not set
> # CONFIG_LOAD_4MB is not set
> # CONFIG_LOAD_64KB is not set
> +
> +#
> +# ARM TrustZone Options
> +#
> +CONFIG_MATRIX=y
> +# CONFIG_ENTER_NWD is not set
> +CONFIG_REDIRECT_ALL_INTS_AIC=y
> +# CONFIG_TZC400 is not set
> CONFIG_JUMP_ADDR="0x26F00000"
>
> #
> @@ -239,15 +252,6 @@ CONFIG_MACH_TYPE="9999"
> # CONFIG_OVERRIDE_MACH_TYPE is not set
> # CONFIG_SECURE is not set
> CONFIG_DISABLE_WATCHDOG=y
> -
> -#
> -# ARM TrustZone Options
> -#
> -CONFIG_MATRIX=y
> -# CONFIG_LOAD_OPTEE is not set
> -# CONFIG_ENTER_NWD is not set
> -CONFIG_REDIRECT_ALL_INTS_AIC=y
> -# CONFIG_TZC400 is not set
> # CONFIG_PM is not set
> # CONFIG_BACKUP_MODE is not set
>
> @@ -260,11 +264,13 @@ CONFIG_BOARD_QUIRK_NONE=y
> # CONFIG_BOARD_QUIRK_SAMA5D2_XULT is not set
> # CONFIG_BOARD_QUIRK_SAMA5D2_ICP is not set
> # CONFIG_BOARD_QUIRK_SAMA5D2_SIP is not set
> +# CONFIG_BOARD_QUIRK_SAM9X60_CURIOSITY is not set
> # CONFIG_BOARD_QUIRK_SAM9X60_EK is not set
> # CONFIG_BOARD_QUIRK_SAM9X60_EB is not set
> # CONFIG_BOARD_QUIRK_SAMA7G5_EK is not set
> -# CONFIG_BOARD_QUIRK_SAM9X60_CURIOSITY is not set
> +# CONFIG_BOARD_QUIRK_OURASI_DDR3_EB is not set
> # CONFIG_BOARD_QUIRK_SAM9X75_EB is not set
> +# CONFIG_BOARD_QUIRK_SAM9X75_CURIOSITY is not set
> # CONFIG_LED_ON_BOARD is not set
>
> #
> diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
> index a2aa6f607ef2..9977c90eaf9a 100644
> --- a/configs/platform-v7a/platformconfig
> +++ b/configs/platform-v7a/platformconfig
> @@ -180,8 +180,8 @@ PTXCONF_CONSOLE_SPEED="115200"
> #
> # PTXCONF_AT91BOOTSTRAP is not set
> PTXCONF_AT91BOOTSTRAP2=y
> -PTXCONF_AT91BOOTSTRAP2_VERSION="4.0.6-rc1"
> -PTXCONF_AT91BOOTSTRAP2_MD5="ef321a80bf428bfd6cb642c96126ef6c"
> +PTXCONF_AT91BOOTSTRAP2_VERSION="4.0.12"
> +PTXCONF_AT91BOOTSTRAP2_MD5="f76ff2a39f9549b5b4ecdf7cf585218c"
> PTXCONF_AT91BOOTSTRAP2_CONFIG="at91bootstrap-wifx-l1.config"
> PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
> PTXCONF_BAREBOX_COMMON=y
> --
> 2.47.3
>
>
next prev parent reply other threads:[~2025-12-08 9:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-05 22:22 [DistroKit] [PATCH 1/6] v8a: barebox-r5: sync config file changes Roland Hieber
2025-12-05 22:22 ` [DistroKit] [PATCH 2/6] v8a: barebox-r5: clean up recipe Roland Hieber
2025-12-10 12:13 ` [DistroKit] [PATCH] fixup! " Michael Olbrich
2025-12-10 13:09 ` Robert Schwebel
2025-12-05 22:22 ` [DistroKit] [PATCH 3/6] v7a: at91bootstrap: version bump 4.0.6-rc1 -> 4.0.12 Roland Hieber
2025-12-08 9:22 ` Alexander Dahl [this message]
2025-12-05 22:22 ` [DistroKit] [PATCH 4/6] v8a: tf-a: make it compile with GCC 15 Roland Hieber
2025-12-05 22:22 ` [DistroKit] [PATCH 5/6] v8a: tf-a: re-export patch queue with 'git ptx-patches' Roland Hieber
2025-12-05 22:22 ` [DistroKit] [PATCH 6/6] toolchains: version bump 2024.11.1 -> 2025.11.0 Roland Hieber
2025-12-06 11:41 ` [DistroKit] [PATCH 1/6] v8a: barebox-r5: sync config file changes Robert Schwebel
2025-12-08 10:22 ` Roland Hieber
2025-12-08 10:27 ` Robert Schwebel
2025-12-08 10:52 ` Roland Hieber
2025-12-09 14:41 ` [DistroKit] [PATCH] fixup! toolchains: version bump 2024.11.1 -> 2025.11.0 Roland Hieber
2025-12-10 6:47 ` Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251208-vigorous-femur-ee5a3cc3dc6d@thorsis.com \
--to=ada@thorsis.com \
--cc=distrokit@pengutronix.de \
--cc=rhi@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox